Home |
Search |
Today's Posts |
#1
Posted to rec.audio.marketplace
|
|||
|
|||
For Sale - KLYNE 7LX3.5B Balanced Solid State Preamp - Excellent Condition!
If you're viewing this ad then I'm sure you know a little about the
Klyne preamps. Klyne preamps are made here in the USA. Klyne preamps are considered as one of the best preamps made. This is a KLYNE System 7LX3.5B Balanced model which I have owned since brand new. I'm the original owner on this unit since new. This unit is finished with the optioned black finish with the black wood sides, as the standard is silver. This unit is in absolute perfect factory fresh condition, cosmetically and sonically with no flaws whatsoever... The option on this unit is a balance option, black finish, the clear plexiglass top and of course I have the black top and owner's manual along with it. I'm selling this unit due to replacing it with a Krell KRC-HR since I have owned a Krell KSA300S for and while and I figure I would like a matching preamp for my amp. This unit comes complete with the separate power supply, cable, owner's manual and box. Additional photos are available at request. Copy and paste to viewed photo of this unit: http://i168.photobucket.com/albums/u...n/DSCN3314.jpg Here is the specs and information on this unit. http://www.klyne.com/pages/reviews.html The Model 7LX3.5 Line Level Preamplifier is designed for the person seeking the ultimate in a neutral but dynamic line level preamplifier. Designed as a control center for both digital and analog based systems, the 7LX3.5 makes an ideal companion to the 7PX3.5 and shares many of the same design and construction features. The exceptional naturalness of the 7LX3.5 preserves all the subtle nuances of the source material and enables it to mate equally well with either vacuum tube or solid state amplifiers. The sonic neutrality of the 7LX3.5 rivals the best of the passive controllers but easily out-performs these units in dynamic contrasts and ability to drive long cables while also providing balanced output capability for amplifiers having balanced inputs. Both balanced and unbalanced outputs for total system flexibility (see input option below). · Separate "listen" and "record" circuits provide ultimate flexibility of signal routing. An input "Off" position for both circuits allows isolation of recording equipment or preamplifier when either is not in use. · One of the five line level inputs provides factory installed options as follows: Model 7LX3.5 - an unbalanced line level input via Oxygen Free Copper RCA phono connectors. Model 7LX3.5/B - a balanced line level input via XLR connectors. · Separate L and R channel input level controls set the input impedance of the unbalanced inputs. Wired in shunt and normally operated in their maximum (or near maximum) positions where no current flows in the wipers, these controls allow for both L/R channel balance and source attenuation without perceptible sonic degradation. · Volume adjustment is achieved by a true stepped attenuator having laser trimmed resistance elements for precise channel tracking. · An auto-mute circuit using FET switches provides a 30-second turn-on delay by clamping the outputs to ground during initial turn-on, in the event of a momentary power failure, or where the line voltage is too low to maintain proper DC regulation. A two-color LED indicates the state of the auto-mute circuit at any time. The mute circuit can also be manually activated with the front-panel mute switch. In this case, a logic circuit allows immediate defeat of muting, yet prevents false resetting if there has been a recent power interruption. · Discrete inverter circuits provide both balanced and unbalanced outputs with optimum sonic performance for both types of amplifier inputs. Balanced output signals are available via both XLR and OFC RCA connectors. · All outputs are direct coupled to eliminate the need for large blocking capacitors in the signal path. DC offset is maintained to plus or minus five millivolts with DC servo circuits operating outside the signal path. All inputs and outputs are protected with shunting diodes. · The bottom panel is made of dense .25 inch thick Corian® composite for high acoustic stability and low electric field interaction. Specifications: Gain: 14 dB Unbalanced; 20 dB Balanced. Bandwidth: 0.1Hz. to 150KHz. Input impedance: 25K Ohms unbal. inputs with input level control set to max. 15K Ohms with input level set at min. (25K per side for balanced input of model 7LX3.5/B.) Output impedance: 300 Ohms Unbalanced. 300 Ohms per side Balanced. Finish: The Chassis is finished with a black Polyurethane paint with a light texture. The Face Panel is anodized, in either black or platinum gold. The Side Bars are black lacquered Ash with a semigloss finish. Dimensions: The 7LX3.5 is 2.5 inches (6.4 cm.) high, 19 inches (48.3 cm.) wide, and 11.58 inches (29.4 cm.) deep. Weight: The preamplifier weighs approximately 15 pounds. The power supply weighs 3 pounds, and total shipping weight is approximately 23 pounds. I'm asking $3,000 + Shipping and "I'm open to any reasonable offers. So please contact me if you are interested and I will be happy to work it out with you" PayPal Users, please add 3% to the total to cover the service charge. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
For Sale - KLYNE 7LX3.5B Balanced Solid State Preamp | Marketplace | |||
Tube mic/ solid state preamp? | Pro Audio | |||
I'm looking for one stellar solid state mic preamp! | Pro Audio | |||
Solid State Preamp Raccomendations | Pro Audio | |||
Klyne 7lx3.5/b line-level Preamplifier // Klyne 7px2.5 solid state phono preamplifier | Marketplace |