Reply
 
Thread Tools Display Modes
  #201   Report Post  
Sockpuppet Yustabe
 
Posts: n/a
Default


"Arny Krueger" wrote in message
...
"The Stainless Steel Boob Orchestra" wrote in message
news:3lb6pv4amttgoblkpdvmqn6bibibmq6had@rdmzrnewst xt.nz
On Mon, 20 Oct 2003 02:02:09 +0200, Lionel
wrote:

Are you jealous because "special people" like Bob and Lionel took
much less time than you to understand that Gregory Singh is a bloody
******* ? Singh is right you should switch from alcohol to
amphetamines for a while. ;-)


Please don't get catty with me, Nylon. I love you really. In little
bits . . .



Sounds like a sociopath talking to tme.

Jere we go a\gain.
This isn't pretty, Arnold .
It doesn't score you any points.




----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---
  #202   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Dogma4e wrote:
On Sun, 19 Oct 2003 16:56:47 GMT, trotsky wrote:



Dogma4e wrote:

On Sun, 19 Oct 2003 12:24:59 GMT, trotsky wrote:



You're an anonymouse, so you're probably not to good with the
English language--


"... not *to* good ..." - priceless, gerg!


Anything to duck the issue, anony****!


Ducking the issue you raised of competency with the English language?
And in raising the issue, you made a language gaffe that is generally
corrected in the third grade! My language skills at least allowed me
to identify and point out your idiotic mistake, and *I'm* the one
ducking the issue! Amazing. You are breath-takingly ****ed up, gerg.
What an absolute hell your life must be.



It can't be that bad--I've got enough pride to have an identity.


If only you had sense enough to what a putz you are.


  #203   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Dogma4e wrote:
On Sun, 19 Oct 2003 16:56:47 GMT, trotsky wrote:



Dogma4e wrote:

On Sun, 19 Oct 2003 12:24:59 GMT, trotsky wrote:



You're an anonymouse, so you're probably not to good with the
English language--


"... not *to* good ..." - priceless, gerg!


Anything to duck the issue, anony****!


Ducking the issue you raised of competency with the English language?
And in raising the issue, you made a language gaffe that is generally
corrected in the third grade! My language skills at least allowed me
to identify and point out your idiotic mistake, and *I'm* the one
ducking the issue! Amazing. You are breath-takingly ****ed up, gerg.
What an absolute hell your life must be.



It can't be that bad--I've got enough pride to have an identity.


If only you had sense enough to what a putz you are.


  #204   Report Post  
trotsky
 
Posts: n/a
Default



Michael Mckelvy wrote:
"trotsky" wrote in message
...


Dogma4e wrote:

On Sun, 19 Oct 2003 16:56:47 GMT, trotsky wrote:



Dogma4e wrote:


On Sun, 19 Oct 2003 12:24:59 GMT, trotsky wrote:




You're an anonymouse, so you're probably not to good with the
English language--


"... not *to* good ..." - priceless, gerg!


Anything to duck the issue, anony****!


Ducking the issue you raised of competency with the English language?
And in raising the issue, you made a language gaffe that is generally
corrected in the third grade! My language skills at least allowed me
to identify and point out your idiotic mistake, and *I'm* the one
ducking the issue! Amazing. You are breath-takingly ****ed up, gerg.
What an absolute hell your life must be.



It can't be that bad--I've got enough pride to have an identity.



If only you had sense enough to what a putz you are.



Was that sentence really supposed to read "If only you had enough sense
to tell Mickey "what a putz you are""?


  #205   Report Post  
trotsky
 
Posts: n/a
Default



Michael Mckelvy wrote:
"trotsky" wrote in message
...


Dogma4e wrote:

On Sun, 19 Oct 2003 16:56:47 GMT, trotsky wrote:



Dogma4e wrote:


On Sun, 19 Oct 2003 12:24:59 GMT, trotsky wrote:




You're an anonymouse, so you're probably not to good with the
English language--


"... not *to* good ..." - priceless, gerg!


Anything to duck the issue, anony****!


Ducking the issue you raised of competency with the English language?
And in raising the issue, you made a language gaffe that is generally
corrected in the third grade! My language skills at least allowed me
to identify and point out your idiotic mistake, and *I'm* the one
ducking the issue! Amazing. You are breath-takingly ****ed up, gerg.
What an absolute hell your life must be.



It can't be that bad--I've got enough pride to have an identity.



If only you had sense enough to what a putz you are.



Was that sentence really supposed to read "If only you had enough sense
to tell Mickey "what a putz you are""?




  #206   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Michael Mckelvy wrote:
"trotsky" wrote in message
...


Dogma4e wrote:

On Sun, 19 Oct 2003 16:56:47 GMT, trotsky wrote:



Dogma4e wrote:


On Sun, 19 Oct 2003 12:24:59 GMT, trotsky wrote:




You're an anonymouse, so you're probably not to good with the
English language--


"... not *to* good ..." - priceless, gerg!


Anything to duck the issue, anony****!


Ducking the issue you raised of competency with the English language?
And in raising the issue, you made a language gaffe that is generally
corrected in the third grade! My language skills at least allowed me
to identify and point out your idiotic mistake, and *I'm* the one
ducking the issue! Amazing. You are breath-takingly ****ed up, gerg.
What an absolute hell your life must be.


It can't be that bad--I've got enough pride to have an identity.



If only you had sense enough to what a putz you are.



Was that sentence really supposed to read "If only you had enough sense
to know"what a putz you are""?


Yes.

You should also recognize the fact that you make plenty of typos yourself.

Of course you're probably to busy with the fire extinguisher to concentrate
fully. :-(




  #207   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Michael Mckelvy wrote:
"trotsky" wrote in message
...


Dogma4e wrote:

On Sun, 19 Oct 2003 16:56:47 GMT, trotsky wrote:



Dogma4e wrote:


On Sun, 19 Oct 2003 12:24:59 GMT, trotsky wrote:




You're an anonymouse, so you're probably not to good with the
English language--


"... not *to* good ..." - priceless, gerg!


Anything to duck the issue, anony****!


Ducking the issue you raised of competency with the English language?
And in raising the issue, you made a language gaffe that is generally
corrected in the third grade! My language skills at least allowed me
to identify and point out your idiotic mistake, and *I'm* the one
ducking the issue! Amazing. You are breath-takingly ****ed up, gerg.
What an absolute hell your life must be.


It can't be that bad--I've got enough pride to have an identity.



If only you had sense enough to what a putz you are.



Was that sentence really supposed to read "If only you had enough sense
to know"what a putz you are""?


Yes.

You should also recognize the fact that you make plenty of typos yourself.

Of course you're probably to busy with the fire extinguisher to concentrate
fully. :-(




  #208   Report Post  
trotsky
 
Posts: n/a
Default



Michael Mckelvy wrote:
"trotsky" wrote in message
...


Michael Mckelvy wrote:

"trotsky" wrote in message
...


Dogma4e wrote:


On Sun, 19 Oct 2003 16:56:47 GMT, trotsky wrote:




Dogma4e wrote:



On Sun, 19 Oct 2003 12:24:59 GMT, trotsky wrote:





You're an anonymouse, so you're probably not to good with the
English language--


"... not *to* good ..." - priceless, gerg!


Anything to duck the issue, anony****!


Ducking the issue you raised of competency with the English language?
And in raising the issue, you made a language gaffe that is generally
corrected in the third grade! My language skills at least allowed me
to identify and point out your idiotic mistake, and *I'm* the one
ducking the issue! Amazing. You are breath-takingly ****ed up, gerg.
What an absolute hell your life must be.


It can't be that bad--I've got enough pride to have an identity.


If only you had sense enough to what a putz you are.



Was that sentence really supposed to read "If only you had enough sense
to know"what a putz you are""?



Yes.



You walked right into that one, Mickey. "What a putz you are."


  #209   Report Post  
trotsky
 
Posts: n/a
Default



Michael Mckelvy wrote:
"trotsky" wrote in message
...


Michael Mckelvy wrote:

"trotsky" wrote in message
...


Dogma4e wrote:


On Sun, 19 Oct 2003 16:56:47 GMT, trotsky wrote:




Dogma4e wrote:



On Sun, 19 Oct 2003 12:24:59 GMT, trotsky wrote:





You're an anonymouse, so you're probably not to good with the
English language--


"... not *to* good ..." - priceless, gerg!


Anything to duck the issue, anony****!


Ducking the issue you raised of competency with the English language?
And in raising the issue, you made a language gaffe that is generally
corrected in the third grade! My language skills at least allowed me
to identify and point out your idiotic mistake, and *I'm* the one
ducking the issue! Amazing. You are breath-takingly ****ed up, gerg.
What an absolute hell your life must be.


It can't be that bad--I've got enough pride to have an identity.


If only you had sense enough to what a putz you are.



Was that sentence really supposed to read "If only you had enough sense
to know"what a putz you are""?



Yes.



You walked right into that one, Mickey. "What a putz you are."


  #210   Report Post  
WindsorFox[SS]
 
Posts: n/a
Default

George M. Middius wrote:


Todd Samost said:


TAKE THIS OFF REC.AUDIO.MARKETPLACE !!!!!!!!!!!!!!!!!!!!!!!!



Take what off?



In otherwords, go back to RAO. Holy crap; you are the reason some of
us stopped reading RAO....



  #211   Report Post  
WindsorFox[SS]
 
Posts: n/a
Default

George M. Middius wrote:


Todd Samost said:


TAKE THIS OFF REC.AUDIO.MARKETPLACE !!!!!!!!!!!!!!!!!!!!!!!!



Take what off?



In otherwords, go back to RAO. Holy crap; you are the reason some of
us stopped reading RAO....

  #212   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Michael Mckelvy wrote:
"trotsky" wrote in message
...


Robert Morein wrote:


A very succinct summary.
It's the personality, not the speakers, which draws the fire.


"Draws fire?" What happened to "catches fire"? It blows my mind that a
bunch of supposedly grown men sit around and talk trash in this manner.
And, of course, you Bob are the biggest hypocrite of them
all--although that's admittedly a long list. Dogging me with your Brian
McCarty like tactics--amazing. I suppose you're already getting your
just desserts because you're such a bad writer; misery loves company.
The only consolation I have is that even a whole newsgroup of beatoffs
and anonymice can't stand toe to toe with me. Oh, and that I've got an
excellent product and you don't. That's got to really burn you, eh Bob?


They've stood toe to toe and beat the living **** out of you. You're

just
to stupid to know it.



Please explain in detail the precautions you took to prevent your
speakers from catching fire, Mickey.

Buh-bye!

I use components in the xover that are rated for more than they will be
called upon for.


  #213   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Michael Mckelvy wrote:
"trotsky" wrote in message
...


Robert Morein wrote:


A very succinct summary.
It's the personality, not the speakers, which draws the fire.


"Draws fire?" What happened to "catches fire"? It blows my mind that a
bunch of supposedly grown men sit around and talk trash in this manner.
And, of course, you Bob are the biggest hypocrite of them
all--although that's admittedly a long list. Dogging me with your Brian
McCarty like tactics--amazing. I suppose you're already getting your
just desserts because you're such a bad writer; misery loves company.
The only consolation I have is that even a whole newsgroup of beatoffs
and anonymice can't stand toe to toe with me. Oh, and that I've got an
excellent product and you don't. That's got to really burn you, eh Bob?


They've stood toe to toe and beat the living **** out of you. You're

just
to stupid to know it.



Please explain in detail the precautions you took to prevent your
speakers from catching fire, Mickey.

Buh-bye!

I use components in the xover that are rated for more than they will be
called upon for.


  #214   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Michael Mckelvy wrote:
"trotsky" wrote in message
...


Dogma4e wrote:


Well, as ye sow, so shall ye reap. Right, Greg?



I agree with you, anonymouse. Everybody on the newsgroup should get
their chance to behave like trash, and nobody missed a turn. In one way
you're correct: this *is* about ego. I don't know why I feel compelled
to prove that I'm better than everybody else, but I certainly am here.


Bwahahahahahahahahahahahahahahahahahahahahahahahah ahahahahahahahaha

yehehahohehehehhahoohahehohahahahahahahohahahahaha hahahahahahahahahahahahaha
hahahahahahahahahahahahahahhahahahahahahaha
hohohohohohahaha.

All this time I thought it was an act, you really are an idiot without

the
least bit of introspection.

Please do yourself a favor and and stick your finger in a light socket

and
turn on the juice. Maybe some shock treatment will do you some good.



Hey, is the flammability factor the reason why you got out of the
business, Mickey?


Who said I got out of it. I still build speakers and get paid for it. I
just don't make it my sole source of income.

Why are you so bound and determined to illustrate how
stupid an asshole you really are?

Disconnect from reality noted.

The one looking like an asshole is the guy trying to pass of a DIY design
from Madisound as his own work.

Come back when YOU design something.


  #215   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Michael Mckelvy wrote:
"trotsky" wrote in message
...


Dogma4e wrote:


Well, as ye sow, so shall ye reap. Right, Greg?



I agree with you, anonymouse. Everybody on the newsgroup should get
their chance to behave like trash, and nobody missed a turn. In one way
you're correct: this *is* about ego. I don't know why I feel compelled
to prove that I'm better than everybody else, but I certainly am here.


Bwahahahahahahahahahahahahahahahahahahahahahahahah ahahahahahahahaha

yehehahohehehehhahoohahehohahahahahahahohahahahaha hahahahahahahahahahahahaha
hahahahahahahahahahahahahahhahahahahahahaha
hohohohohohahaha.

All this time I thought it was an act, you really are an idiot without

the
least bit of introspection.

Please do yourself a favor and and stick your finger in a light socket

and
turn on the juice. Maybe some shock treatment will do you some good.



Hey, is the flammability factor the reason why you got out of the
business, Mickey?


Who said I got out of it. I still build speakers and get paid for it. I
just don't make it my sole source of income.

Why are you so bound and determined to illustrate how
stupid an asshole you really are?

Disconnect from reality noted.

The one looking like an asshole is the guy trying to pass of a DIY design
from Madisound as his own work.

Come back when YOU design something.




  #216   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Robert Morein wrote:
"Joseph Oberlander" wrote in message
ink.net...

Dogma4e wrote:


On Sat, 18 Oct 2003 10:18:38 -0400, George M. Middius
wrote:



Dogma4e said:

[snip]


Please don't encourage Mc****head.



It doesn't look like he needs much encouragement. Matter of fact, it
is pretty interesting to watch the dynamic of Jupiter Audio's
presentation here at RAO. If you look at the first few dozen posts in
the original "Here It Is" thread, the vast majority were encouraging
and even respectful of gerg's effort. If gerg had somehow undergone a
personality transplant, he probably could have gathered good
suggestions on how to market and improve his product,

Actually, many people, including myself gave him advice. He stuck his
head in the sand and refused to listen.


Second that.
Greg, don't use your cordless screwdriver around glued-in stuffing.
You might get your finger caught in the stuffing-cum-glue, and be forced

to
think of a solution.



Bob, I turn out a damned good product.


YOU turned out nothing, unless you changed your name to Madisound.

You, on the other hand, are
ashamed of yours. Who's hiding his head in the sand?

Still you, fraud.

Again, being a chronic hypocrite is no way to live. Middius can attest
to that.

Being a welcher and a fraud is a way to live?


  #217   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Robert Morein wrote:
"Joseph Oberlander" wrote in message
ink.net...

Dogma4e wrote:


On Sat, 18 Oct 2003 10:18:38 -0400, George M. Middius
wrote:



Dogma4e said:

[snip]


Please don't encourage Mc****head.



It doesn't look like he needs much encouragement. Matter of fact, it
is pretty interesting to watch the dynamic of Jupiter Audio's
presentation here at RAO. If you look at the first few dozen posts in
the original "Here It Is" thread, the vast majority were encouraging
and even respectful of gerg's effort. If gerg had somehow undergone a
personality transplant, he probably could have gathered good
suggestions on how to market and improve his product,

Actually, many people, including myself gave him advice. He stuck his
head in the sand and refused to listen.


Second that.
Greg, don't use your cordless screwdriver around glued-in stuffing.
You might get your finger caught in the stuffing-cum-glue, and be forced

to
think of a solution.



Bob, I turn out a damned good product.


YOU turned out nothing, unless you changed your name to Madisound.

You, on the other hand, are
ashamed of yours. Who's hiding his head in the sand?

Still you, fraud.

Again, being a chronic hypocrite is no way to live. Middius can attest
to that.

Being a welcher and a fraud is a way to live?


  #218   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Rich Andrews wrote:
dave weil wrote in
:


On Sat, 18 Oct 2003 22:39:59 GMT, trotsky wrote:



Joseph Oberlander wrote:

trotsky wrote:



Robert Morein wrote:


A very succinct summary.
It's the personality, not the speakers, which draws the fire.




"Draws fire?" What happened to "catches fire"?


Well, the adhesive you used on the stuffing *is* flammable.


You know, that's interesting: I was assembling a pair of speakers
yesterday, attempting to screw the crossover boards in place, when a
screw got tangled in the insulation and I couldn't get it out. I then
used my Dremel's cutting tool attachment to cut the head of the screw
off. It showered sparks for about 90 seconds continuously, and I
briefly wondered if one of you dumb ****ing *******s might've been
right, and something could catch fire. No, I'm afraid not.

This will be the special edition pair, right?




That shower of sparks is a relatively low temperature occurance. Try
placing a sheet of paper in the direct path sometime. You will be
surprised.



I would be surprised by the number of speakers with pieces of paper
stuck in side of them, yes.

Check the inside of those cheap ass caps in your xover.


  #219   Report Post  
Michael Mckelvy
 
Posts: n/a
Default


"trotsky" wrote in message
...


Rich Andrews wrote:
dave weil wrote in
:


On Sat, 18 Oct 2003 22:39:59 GMT, trotsky wrote:



Joseph Oberlander wrote:

trotsky wrote:



Robert Morein wrote:


A very succinct summary.
It's the personality, not the speakers, which draws the fire.




"Draws fire?" What happened to "catches fire"?


Well, the adhesive you used on the stuffing *is* flammable.


You know, that's interesting: I was assembling a pair of speakers
yesterday, attempting to screw the crossover boards in place, when a
screw got tangled in the insulation and I couldn't get it out. I then
used my Dremel's cutting tool attachment to cut the head of the screw
off. It showered sparks for about 90 seconds continuously, and I
briefly wondered if one of you dumb ****ing *******s might've been
right, and something could catch fire. No, I'm afraid not.

This will be the special edition pair, right?




That shower of sparks is a relatively low temperature occurance. Try
placing a sheet of paper in the direct path sometime. You will be
surprised.



I would be surprised by the number of speakers with pieces of paper
stuck in side of them, yes.

Check the inside of those cheap ass caps in your xover.


  #220   Report Post  
trotsky
 
Posts: n/a
Default

Michael Mckelvy wrote:
"trotsky" wrote in message
...


Michael Mckelvy wrote:

"trotsky" wrote in message
...


Robert Morein wrote:



A very succinct summary.
It's the personality, not the speakers, which draws the fire.


"Draws fire?" What happened to "catches fire"? It blows my mind that a
bunch of supposedly grown men sit around and talk trash in this manner.
And, of course, you Bob are the biggest hypocrite of them
all--although that's admittedly a long list. Dogging me with your Brian
McCarty like tactics--amazing. I suppose you're already getting your
just desserts because you're such a bad writer; misery loves company.
The only consolation I have is that even a whole newsgroup of beatoffs
and anonymice can't stand toe to toe with me. Oh, and that I've got an
excellent product and you don't. That's got to really burn you, eh Bob?


They've stood toe to toe and beat the living **** out of you. You're


just

to stupid to know it.



Please explain in detail the precautions you took to prevent your
speakers from catching fire, Mickey.

Buh-bye!


I use components in the xover that are rated for more than they will be
called upon for.



Now this is interesting: are you claiming that there are crossover
components you can use that are particularly flammable?



  #221   Report Post  
trotsky
 
Posts: n/a
Default

Michael Mckelvy wrote:
"trotsky" wrote in message
...


Michael Mckelvy wrote:

"trotsky" wrote in message
...


Robert Morein wrote:



A very succinct summary.
It's the personality, not the speakers, which draws the fire.


"Draws fire?" What happened to "catches fire"? It blows my mind that a
bunch of supposedly grown men sit around and talk trash in this manner.
And, of course, you Bob are the biggest hypocrite of them
all--although that's admittedly a long list. Dogging me with your Brian
McCarty like tactics--amazing. I suppose you're already getting your
just desserts because you're such a bad writer; misery loves company.
The only consolation I have is that even a whole newsgroup of beatoffs
and anonymice can't stand toe to toe with me. Oh, and that I've got an
excellent product and you don't. That's got to really burn you, eh Bob?


They've stood toe to toe and beat the living **** out of you. You're


just

to stupid to know it.



Please explain in detail the precautions you took to prevent your
speakers from catching fire, Mickey.

Buh-bye!


I use components in the xover that are rated for more than they will be
called upon for.



Now this is interesting: are you claiming that there are crossover
components you can use that are particularly flammable?

  #222   Report Post  
trotsky
 
Posts: n/a
Default

Michael Mckelvy wrote:
"trotsky" wrote in message
...


Michael Mckelvy wrote:

"trotsky" wrote in message
...


Dogma4e wrote:



Well, as ye sow, so shall ye reap. Right, Greg?



I agree with you, anonymouse. Everybody on the newsgroup should get
their chance to behave like trash, and nobody missed a turn. In one way
you're correct: this *is* about ego. I don't know why I feel compelled
to prove that I'm better than everybody else, but I certainly am here.


Bwahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahaha


yehehahohehehehhahoohahehohahahahahahahohahahahaha hahahahahahahahahahahahaha

hahahahahahahahahahahahahahhahahahahahahaha
hohohohohohahaha.

All this time I thought it was an act, you really are an idiot without


the

least bit of introspection.

Please do yourself a favor and and stick your finger in a light socket


and

turn on the juice. Maybe some shock treatment will do you some good.



Hey, is the flammability factor the reason why you got out of the
business, Mickey?



Who said I got out of it. I still build speakers and get paid for it. I
just don't make it my sole source of income.

Why are you so bound and determined to illustrate how

stupid an asshole you really are?


Disconnect from reality noted.

The one looking like an asshole is the guy trying to pass of a DIY design
from Madisound as his own work.

Come back when YOU design something.



Mickey, your jealousy is appalling.

  #223   Report Post  
trotsky
 
Posts: n/a
Default

Michael Mckelvy wrote:
"trotsky" wrote in message
...


Michael Mckelvy wrote:

"trotsky" wrote in message
...


Dogma4e wrote:



Well, as ye sow, so shall ye reap. Right, Greg?



I agree with you, anonymouse. Everybody on the newsgroup should get
their chance to behave like trash, and nobody missed a turn. In one way
you're correct: this *is* about ego. I don't know why I feel compelled
to prove that I'm better than everybody else, but I certainly am here.


Bwahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahaha


yehehahohehehehhahoohahehohahahahahahahohahahahaha hahahahahahahahahahahahaha

hahahahahahahahahahahahahahhahahahahahahaha
hohohohohohahaha.

All this time I thought it was an act, you really are an idiot without


the

least bit of introspection.

Please do yourself a favor and and stick your finger in a light socket


and

turn on the juice. Maybe some shock treatment will do you some good.



Hey, is the flammability factor the reason why you got out of the
business, Mickey?



Who said I got out of it. I still build speakers and get paid for it. I
just don't make it my sole source of income.

Why are you so bound and determined to illustrate how

stupid an asshole you really are?


Disconnect from reality noted.

The one looking like an asshole is the guy trying to pass of a DIY design
from Madisound as his own work.

Come back when YOU design something.



Mickey, your jealousy is appalling.

  #224   Report Post  
trotsky
 
Posts: n/a
Default

Michael Mckelvy wrote:
"trotsky" wrote in message
...


Robert Morein wrote:

"Joseph Oberlander" wrote in message
thlink.net...


Dogma4e wrote:



On Sat, 18 Oct 2003 10:18:38 -0400, George M. Middius
wrote:




Dogma4e said:

[snip]


Please don't encourage Mc****head.



It doesn't look like he needs much encouragement. Matter of fact, it
is pretty interesting to watch the dynamic of Jupiter Audio's
presentation here at RAO. If you look at the first few dozen posts in
the original "Here It Is" thread, the vast majority were encouraging
and even respectful of gerg's effort. If gerg had somehow undergone a
personality transplant, he probably could have gathered good
suggestions on how to market and improve his product,

Actually, many people, including myself gave him advice. He stuck his
head in the sand and refused to listen.


Second that.
Greg, don't use your cordless screwdriver around glued-in stuffing.
You might get your finger caught in the stuffing-cum-glue, and be forced


to

think of a solution.



Bob, I turn out a damned good product.



YOU turned out nothing, unless you changed your name to Madisound.



Sounds like I made a better move than you did, Mickey. Unless sour
grapes was what you were originally shooting for.

  #225   Report Post  
trotsky
 
Posts: n/a
Default

Michael Mckelvy wrote:
"trotsky" wrote in message
...


Robert Morein wrote:

"Joseph Oberlander" wrote in message
thlink.net...


Dogma4e wrote:



On Sat, 18 Oct 2003 10:18:38 -0400, George M. Middius
wrote:




Dogma4e said:

[snip]


Please don't encourage Mc****head.



It doesn't look like he needs much encouragement. Matter of fact, it
is pretty interesting to watch the dynamic of Jupiter Audio's
presentation here at RAO. If you look at the first few dozen posts in
the original "Here It Is" thread, the vast majority were encouraging
and even respectful of gerg's effort. If gerg had somehow undergone a
personality transplant, he probably could have gathered good
suggestions on how to market and improve his product,

Actually, many people, including myself gave him advice. He stuck his
head in the sand and refused to listen.


Second that.
Greg, don't use your cordless screwdriver around glued-in stuffing.
You might get your finger caught in the stuffing-cum-glue, and be forced


to

think of a solution.



Bob, I turn out a damned good product.



YOU turned out nothing, unless you changed your name to Madisound.



Sounds like I made a better move than you did, Mickey. Unless sour
grapes was what you were originally shooting for.



  #226   Report Post  
trotsky
 
Posts: n/a
Default

Michael Mckelvy wrote:
"trotsky" wrote in message
...


Rich Andrews wrote:

dave weil wrote in
:



On Sat, 18 Oct 2003 22:39:59 GMT, trotsky wrote:



Joseph Oberlander wrote:


trotsky wrote:



Robert Morein wrote:



A very succinct summary.
It's the personality, not the speakers, which draws the fire.




"Draws fire?" What happened to "catches fire"?


Well, the adhesive you used on the stuffing *is* flammable.


You know, that's interesting: I was assembling a pair of speakers
yesterday, attempting to screw the crossover boards in place, when a
screw got tangled in the insulation and I couldn't get it out. I then
used my Dremel's cutting tool attachment to cut the head of the screw
off. It showered sparks for about 90 seconds continuously, and I
briefly wondered if one of you dumb ****ing *******s might've been
right, and something could catch fire. No, I'm afraid not.

This will be the special edition pair, right?




That shower of sparks is a relatively low temperature occurance. Try
placing a sheet of paper in the direct path sometime. You will be
surprised.



I would be surprised by the number of speakers with pieces of paper
stuck in side of them, yes.


Check the inside of those cheap ass caps in your xover.



Which are the really expensive ass caps?

  #227   Report Post  
trotsky
 
Posts: n/a
Default

Michael Mckelvy wrote:
"trotsky" wrote in message
...


Rich Andrews wrote:

dave weil wrote in
:



On Sat, 18 Oct 2003 22:39:59 GMT, trotsky wrote:



Joseph Oberlander wrote:


trotsky wrote:



Robert Morein wrote:



A very succinct summary.
It's the personality, not the speakers, which draws the fire.




"Draws fire?" What happened to "catches fire"?


Well, the adhesive you used on the stuffing *is* flammable.


You know, that's interesting: I was assembling a pair of speakers
yesterday, attempting to screw the crossover boards in place, when a
screw got tangled in the insulation and I couldn't get it out. I then
used my Dremel's cutting tool attachment to cut the head of the screw
off. It showered sparks for about 90 seconds continuously, and I
briefly wondered if one of you dumb ****ing *******s might've been
right, and something could catch fire. No, I'm afraid not.

This will be the special edition pair, right?




That shower of sparks is a relatively low temperature occurance. Try
placing a sheet of paper in the direct path sometime. You will be
surprised.



I would be surprised by the number of speakers with pieces of paper
stuck in side of them, yes.


Check the inside of those cheap ass caps in your xover.



Which are the really expensive ass caps?

  #228   Report Post  
Robert Morein
 
Posts: n/a
Default


"trotsky" wrote in message
link.net...
Michael Mckelvy wrote:
"trotsky" wrote in message
...


Michael Mckelvy wrote:

"trotsky" wrote in message
...


Robert Morein wrote:



A very succinct summary.
It's the personality, not the speakers, which draws the fire.


"Draws fire?" What happened to "catches fire"? It blows my mind that

a
bunch of supposedly grown men sit around and talk trash in this

manner.
And, of course, you Bob are the biggest hypocrite of them
all--although that's admittedly a long list. Dogging me with your

Brian
McCarty like tactics--amazing. I suppose you're already getting your
just desserts because you're such a bad writer; misery loves company.
The only consolation I have is that even a whole newsgroup of beatoffs
and anonymice can't stand toe to toe with me. Oh, and that I've got

an
excellent product and you don't. That's got to really burn you, eh

Bob?


They've stood toe to toe and beat the living **** out of you. You're


just

to stupid to know it.


Please explain in detail the precautions you took to prevent your
speakers from catching fire, Mickey.

Buh-bye!


I use components in the xover that are rated for more than they will be
called upon for.



Now this is interesting: are you claiming that there are crossover
components you can use that are particularly flammable?

Yes, there are.
What are you using? We'll tell you how dangerous they are when combined with
the glue you're sniffing.


  #229   Report Post  
Robert Morein
 
Posts: n/a
Default


"trotsky" wrote in message
link.net...
Michael Mckelvy wrote:
"trotsky" wrote in message
...


Michael Mckelvy wrote:

"trotsky" wrote in message
...


Robert Morein wrote:



A very succinct summary.
It's the personality, not the speakers, which draws the fire.


"Draws fire?" What happened to "catches fire"? It blows my mind that

a
bunch of supposedly grown men sit around and talk trash in this

manner.
And, of course, you Bob are the biggest hypocrite of them
all--although that's admittedly a long list. Dogging me with your

Brian
McCarty like tactics--amazing. I suppose you're already getting your
just desserts because you're such a bad writer; misery loves company.
The only consolation I have is that even a whole newsgroup of beatoffs
and anonymice can't stand toe to toe with me. Oh, and that I've got

an
excellent product and you don't. That's got to really burn you, eh

Bob?


They've stood toe to toe and beat the living **** out of you. You're


just

to stupid to know it.


Please explain in detail the precautions you took to prevent your
speakers from catching fire, Mickey.

Buh-bye!


I use components in the xover that are rated for more than they will be
called upon for.



Now this is interesting: are you claiming that there are crossover
components you can use that are particularly flammable?

Yes, there are.
What are you using? We'll tell you how dangerous they are when combined with
the glue you're sniffing.


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
What are they Teaching Michael McKelvy Audio Opinions 199 October 15th 04 07:56 PM
John Kerry's Trail of Treachery pyjamarama Audio Opinions 0 April 8th 04 12:06 PM
rec.audio.car FAQ (Part 3/5) Ian D. Bjorhovde Car Audio 0 March 6th 04 07:54 AM
Here it is! Part II trotsky Audio Opinions 255 October 24th 03 06:10 AM


All times are GMT +1. The time now is 12:46 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"