Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Digi 001 or other multichannel interface
I'm looking to sell my 8-channel ADAT card and M-Audio Delta 1010 LT in
favour of a single unit that has 8 analog inputs and 8-channel ADAT optical in. Mic preamps would be nice but are not essential. My work isn't high-end enough to warrant spending lots of money on expensive converters (my 8-channel ADAT in will be coming from a cheapo Behringer 8-channel preamp anyway) so fantastic quality isn't the most important thing since I can't really afford to go much over £250 or so, but obviously the better sound, the better. As I said, price is a strong concern and I'd be looking for a used unit. I'm thinking about a used Digi 001, the Echo Layla or the M-Audio FW1814. I'd like to continue to use Logic 5.5 (I'm running an Athlon 1800 with 512mb RAM) unless I get the Digi and love Protools LE enough to keep using it. Any thoughts regarding audio quality, compatibility with software/hardware, driver support etc? What's the difference between the Digi 001 and 002, apart from compatibility with newer versions of Protools? Many thanks. TJ -- tj hertz tjhertz at gmail dot com |
#2
|
|||
|
|||
out of your suggestions, the best in my opinion is the maudio firewire
1814. I have one and think for the value it's really excellent. I'm using with PTMP but I'm sure it will be greatwith logic or anything else. M audio has always seemed to be real good with driver support. I wouldprobably stay away from digi001 at this stage as driver support may become too limiting in the future and you'll be forced to upgrade again. Digi 002 is a good option, but really only if you want to get into protools. As far as i can tell the M audio FW 1814 is just as useful as the digi 002 save for the lack of extra mic pres, and for a lot less money. The advantage of the m audio is you don't have to pay for pro tools if you don't want to get into it now, and you can get into it later for not much. The real question here is why do you want to upgrade? any one of the devices mentioned will do essentially what your 2 cards do now with one exception- the adat card won't work with pro tools is you decide you want that route. The delta 1010lt does work with ptmp though. Are you justlooking to replace the multiple pci cards with a single one or a firewire interface? You can get into a FW1814 for about $500 USD. PTMP is another $300. Nate www.natenajar.com |
#3
|
|||
|
|||
"TJ Hertz" wrote:
I'm thinking about a used Digi 001, the Echo Layla or the M-Audio FW1814. I'd like to continue to use Logic 5.5 (I'm running an Athlon 1800 with 512mb RAM) unless I get the Digi and love Protools LE enough to keep using it. Any thoughts regarding audio quality, compatibility with software/hardware, driver support etc? What's the difference between the Digi 001 and 002, apart from compatibility with newer versions of Protools? With the Digi 001 you're buying into obsolescence. That's not necessarily a problem, as long as you know what you're getting into. Potential pitfalls include wanting to update to a newer OS to take advantage of some new software, and not being able to get drivers for the 001. That's a "potential" problem though. It will continue to work as intended as long as you don't try to take the system around it too far into the future. As you mentioned, newer versions of Pro Tools don't work with the 001. Since you plan to use Logic that shouldn't be an issue. The other difference between the 001 and newer Digi devices is the interface. The 001 uses a PCI card, while the 002 is Firewire. That allows you to use the 002 with more than one machine (including a laptop), and reduces the likelihood of hardware conflicts. The converters in the 002 are a little better than the 001, but I don't know if there's enough difference to justify the cost in the situation you described. The 002 is also capable of recording at 96K, but that's *really* a fluff feature in this case. The Layla is a great box, but you're back to having a PCI card, and you can't use Pro Tools even if you want to. You're probably better off with the 001, so at least you have that option. I'm not familiar with the M-Audio device you mentioned, so I'll leave that one alone. -- "It CAN'T be too loud... some of the red lights aren't even on yet!" - Lorin David Schultz in the control room making even bad news sound good (Remove spamblock to reply) |
#4
|
|||
|
|||
TJ Hertz wrote:
I'm looking to sell my 8-channel ADAT card and M-Audio Delta 1010 LT in favour of a single unit that has 8 analog inputs and 8-channel ADAT optical in. Mic preamps would be nice but are not essential. My work isn't high-end enough to warrant spending lots of money on expensive converters (my 8-channel ADAT in will be coming from a cheapo Behringer 8-channel preamp anyway) so fantastic quality isn't the most important thing since I can't really afford to go much over £250 or so, but obviously the better sound, the better. As I said, price is a strong concern and I'd be looking for a used unit. I'm thinking about a used Digi 001, the Echo Layla or the M-Audio FW1814. I'd like to continue to use Logic 5.5 (I'm running an Athlon 1800 with 512mb RAM) unless I get the Digi and love Protools LE enough to keep using it. Any thoughts regarding audio quality, compatibility with software/hardware, driver support etc? What's the difference between the Digi 001 and 002, apart from compatibility with newer versions of Protools? I don't think you really want to change software at the same time you change hardware. Why complicate the switch and create more questions of compatibility and configuration if you don't have to? If you like Logic, then keep using it and buy something compatible (which should be just about anything, right?) And if you aren't going to run ProTools, then there's really no reason to buy their hardware, because their low-end stuff is overpriced IMHO. So the next question is how you want to connect the interface to your computer. It sounds like you've been using a PCI card, but I would venture to say that switching over to a IEEE1394 or USB2 interface will keep your computer upgrade options open in the future. There's just no reason most computers should continue to have large chassis, PCI slots, and 450W power supplies in the future. That's my take on it anyway. I'd suggest the MOTU 896HD but that's a bit out of your price range. It does everything you're asking though, and it works quite well. ulysses |
#6
|
|||
|
|||
"studiorat" wrote in message
oups.com... The Gina is a great little box an sounds much better than a 001, which sounds poxy... I agree that the Gina is a decent little device, but I don't think the 001 is as bad as you make it out to be. Nor do I think there's much improvement over a 001 by going to a Gina. The 001 is not going to win any converter shootouts, but neither is a Gina. -- "It CAN'T be too loud... some of the red lights aren't even on yet!" - Lorin David Schultz in the control room making even bad news sound good (Remove spamblock to reply) |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sub Amps - a Follow up Question | Tech | |||
Digi 002 Audio Interface And Logic 7 | Pro Audio | |||
Why should I choose an "M-Audio" interface over a "Pro-Tools" interface??? | Pro Audio | |||
FA:Aphex 250 Aural Exciter and Digi 888/24 Interface | Pro Audio | |||
FA:Aphex 250 Aural Exciter and Digi 888/24 Interface | Pro Audio |