[[email protected]]

Okay, so I bought a new radio, and I have the wiring diagram, It's
telling me that I have to splice some wires because the 1988 harness
won't fit the 2007 radio device. That's all fine and well because I
have a diagram for the 2007 wires. However, I have no idea what each
individual wire is suppose to connect to on the OLD wires in my
Accord. Does anybody know what each color is? For instance, I have
gray -- Rear Preamp Output, which I don't think is necessary, Blue --
Remote turn-on which I also don't think is necessary, Black -- Ground,
Red -- Accessory (for "connecting to existing ignition circuit or
switched 12 volt source"), Yellow -- Connect to Battery circuit or
constant 12 volt source, Gray/Black + Gray -- Right front speaker,
Violet/Black + Violet -- Right Rear speaker, White/Black + White --
Left Front speaker, Green/Black + Green -- Left Rear speaker.

Can anybody lead me to a diagram for the wires on the original 1988
harness?

Thanks!

[theblooms]

Save yourself the headaches and get the appropriate wiring harness.
They are only like $10-$12 from any car stereo shop, $8 online.

http://cgi.ebay.com/Radio-wire-Harne...QQcmdZViewItem

Is an appropriate harness.