Home |
Search |
Today's Posts |
#41
![]() |
|||
|
|||
![]() "Nothing40" wrote in message m... Hey Brenda Ann,Nice to see you hangin around here. :-) Thanks, at least we aren't getting 300 idiotic posts a day in here. (yet) ![]() |
#43
![]() |
|||
|
|||
![]()
In article , donut wrote:
OK - the IF distortion was one reason that the TRF was favored for really true hi-fidelity AM. RF amplifiers have exactly the same distortion problem as IF amplifiers, of course the TRF eliminates the mixer/oscillator and all their associated problems. How many stages of RF amplification would a TRF need to equal the sensitivity of an AA5? Two well designed RF stages ought to do it, the gain per stage probably won't be quite as great as an IF amplifier stage, but this is compensated by the fact that the conversion gain of the converter stage in the AA5 is not that high. I know there's a problem with selectivity but the more tuned circuits, the better that would get. Would 5 tank circuits and 5 RF amplifier stages, all operating near unity gain (except for the first one) be sufficient? 5 tank circuits would be good, but I suggest using only two RF amplifier stages, as this should be able to equal the gain of the AA5, and 5 stages would be a nightmare to layout so you don't get unwanted feedback and oscillation. Just cascading 5 single tuned tank circuits is going to give you a filter with a very poor shape factor. I suggest you use a single tuned circuit for the antenna, and a pair of double tuned circuits, one between the two RF amplifier stages, and the second between the second RF amplifier stage and the detector. This will give a better shape factor. Add some series resistance to the tank circuits, and keep the source and load resistances high, so that the Q increases with frequency, and then on the two double tuned circuits use the coupling scheme used by the Western Electric No. 10-A, Weeden, and J.W. Miller TRF tuners, so that the coupling coefficient varies inversely with frequency, giving you a nice approximation of a constant bandwidth at both the high and low ends of the AM broadcast band. J.W. Miller called this scheme "negative mutual coupling". Don't make the mistake those three radios did of using aperiodic coupling between the detector, my discussion with Patrick showed why that is a bad idea. And even more important, unless you live way out in the sticks, don't use an aperiodic antenna coupling stage as Miller did, as this will let the powerful nearby stations into the first RF amplifier stage, creating all sorts of havoc. Would each RF stage add some distortion of it's own? Yes, the distortion situation is identical with that of the IF amplifiers. I ask this question because I can get a 5 gang variable cap very inexpensively. Go for it then. Regards, John Byrns Surf my web pages at, http://users.rcn.com/jbyrns/ |
#44
![]() |
|||
|
|||
![]()
In article , Patrick Turner
wrote: To address this problem I suggest a PP IF amp isn't as crazy /wacky as you think. Its simply an application of the well known fact that a PP amp using two tubes produces a far cleaner result than one SE tube, for the amount of power produced by one tube on its own. The dynamic range is potentially increased 6dB, or doubled, but what I suggest is worth having is the simple absence of distortion. I don't understand where you are getting this 6 dB figure from, I would think it would be closer to 3 dB? Keep in mind that the distortion reducing feature of PP amps is largely lost in this application, so the principal advantage of the PP circuit is a doubling of the power available for driving the detector. Regards, John Byrns Surf my web pages at, http://users.rcn.com/jbyrns/ |
#45
![]() |
|||
|
|||
![]() John Byrns wrote: In article , Patrick Turner wrote: To address this problem I suggest a PP IF amp isn't as crazy /wacky as you think. Its simply an application of the well known fact that a PP amp using two tubes produces a far cleaner result than one SE tube, for the amount of power produced by one tube on its own. The dynamic range is potentially increased 6dB, or doubled, but what I suggest is worth having is the simple absence of distortion. I don't understand where you are getting this 6 dB figure from, I would think it would be closer to 3 dB? Well, each half of the PP circuit can produce the same output voltage, but oppositely phased, so potentially, there is twice the voltage produced. Elementary, dear Watson. The load a-a must be twice the single tube load. But even if this isn't the case with a parafeed set up using a standard IFT, there is still second harmonic current cancelling in the tubes, and it has to give lower distortion. Keep in mind that the distortion reducing feature of PP amps is largely lost in this application, I am not so sure, I still think the PP would be advantageous, and it needs to be built and measured, before deciding if its better or not. so the principal advantage of the PP circuit is a doubling of the power available for driving the detector. Well, twice the voltage output, if possible, so the detector should be made to have as high a voltage capability as possible, able to detect 50vrms. Then when only 2 vrms is wanted, expect thd to be negligible. With high level signals, the snr should be excellent. Usually, most local station AM radios are quire OK regarding snr, its not until you get up into the high SW bands that one might think about triode mixers, et all, for low noise, perhaps a fet input stage. There is no other point to PP IF amps, and a CF detector, then with a CF buffer, other than chasing fidelity. Its easy to make a fair sounding radio with the standard fare, mixer, vari mu IF amp, diode detector, then two audio stages with no FB. Fair is all it will be. One of these days, I must try the PP IF stage, but with IF = 2.4MHz, and two stages, the first can be a vari mu stage, since its signal is very low. making the IFTs and oscilator coils should be quite easy; less turns, and maybe not even need litz wire. I recall someone even tried a higher IF frequency.... For MW, low transconductance pentodes would be best, since too much gain in two IF stages would be a hassle. There must be 1,001 ways of building a radio. Patrick Turner. Regards, John Byrns Surf my web pages at, http://users.rcn.com/jbyrns/ |
#46
![]() |
|||
|
|||
![]()
Patrick Turner wrote in
: I suggest ppl who have doubt about this should go back to the old books, and do some real study, to save us from having to regurgitate what is in those textbooks. So off your bums, away from the PC and start reading!!!! 1) Some of us don't have access to the old books. 2) We are helping you keep your thought processes active. ![]() |
#47
![]() |
|||
|
|||
![]()
(John Byrns) wrote in message ...
In article , (firedome) wrote: As for the circuit's provenance, I never said S-R invented it...it was, as I said, an adaptation of the Selden -Smith 2 tube decector circuit (did any one else use 2 tube detectors?) found in the RDH3. Will Rayment never claimed to have invented it, but was the only one to use it in a commercial product AFAIK. I tried to email you about some information that I received from Walter Selsted on the "two tube" detector, but your email address bounces. Perhaps you already talked to Walter, did you interview him for your article on the S-R tuner? Oh, I changed ISP... it's . I wrote earlier today Walter, I didn't know he was still with us. You might want to talk to Will Rayment, I'm sure he'd be happy to oblige, eMail me for contact info... An article on this AM circuit might make a good VTV submission, Charlie would welcome a well written piece on it I'd imagine... Roger in NY Regards, John Byrns Surf my web pages at, http://users.rcn.com/jbyrns/ |
#48
![]() |
|||
|
|||
![]()
In article ,
(Brian) wrote: I pulled Sturley down off the bookshelf to check for more detail from the reference given in the RDH4 for "Modulation Envelope Distortion". So far When you get done reading, John, I'd be interested to know some typical distortion figures. OK, I quickly scanned ahead and I see mentions of things like 5% distortion, which I believe is a typical radio design goal, so he presumably is shooting for something like that. It looks like he discusses how to calculate the distortion from the tube characteristic curves, but the real meat is probably in the references he gives at the end of the chapter, hopefully he gives enough in the book to work it out. I see one point where he discusses calculating the second harmonic envelope distortion by operating the tube as an audio amplifier, and measuring the third harmonic distortion of a sine wave, this fits right in with the discussion Patrick and I have been having. I'll bet they're signficant only for very strong signals. Clearly the IF amplifier distortion will go down at lower signal levels, and of course diode detector distortion tends to rise at low signal levels. Diode detector distortion seems rather minor until the modulation gets high enough to get into negative peak clipping problems. I know that some receivers attenuate the AVC to the last IF stage to minimize envelope distortion since that's where the highest signal levels occur. I will have to actually read the section from Sturley to see what he is really saying but on my quick scan, it looked like he said the distortion actually decreases as the negative bias on the vari-mu IF amplifier tube becomes more negative, but that is in relation to a fixed input voltage to the grid. Clearly in a real radio if the AGC is trying to maintain a constant voltage at the detector, then the grid drive is going to have to increase, and my question would be how does the distortion compare then. To ask the question another way, for a given output from the tube is the distortion lower with high negative bias and signal input to the grid, or with lower negative bias and signal input? It will be interesting to see if he addresses the issue from that perspective. Still, my guess is that this source of distortion pales in comparison to that due to low modulation acceptance. But the distortion due to "low modulation acceptance" increases abruptly at some point as the modulation level increases, while the amplitude of the distortion caused by the IF presumably follows the second power of the modulation level, and the third power of the signal level. Regards, John Byrns Surf my web pages at, http://users.rcn.com/jbyrns/ |
#49
![]() |
|||
|
|||
![]()
In article ,
(firedome) wrote: Oh, I changed ISP... it's . I tried the westelcom ISP address that I had from when you emailed me late last year, and it bounced, but the user name was "fireflite", so I assume that was the problem. Is there an article lurking in this firedome/fireflite business? I wrote earlier today Walter, I didn't know he was still with us. Yes, I assume he is, he was back in January. You might want to talk to Will Rayment, I'm sure he'd be happy to oblige, eMail me for contact info... OK, thanks, but first I want to see if I can get directly in touch with Water Selsted, and ask him if he remembers how S-R became aware of the detector, as that was a question I didn't think of originally, and it is more interesting now that it appears he never published anything on the detector. An article on this AM circuit might make a good VTV submission, Charlie would welcome a well written piece on it I'd imagine... By "AM circuit" I assume you mean the entire tuner, not just the detector? I am most interested in the history of the detector itself, and while I have seen it referred to as a diode detector followed by a cathode follower, I don't feel that is an accurate description, as the cathode follower is operating in a nonlinear mode. The Selsted Smith detector appears to me to be a slight variation on the so called "infinite impedance", or reflex detector, which was developed by RCA. The intended operation of the Selsted Smith detector is somewhat obscure, I have never seen a technical article that discusses its design and operation. I have been trying to run down some definite information on the RCA "infinite impedance", or reflex detector, presumably there is an RCA licensee Laboratories Bulletin describing its design and operation, but finding a source for the RCA licensee Bulletins from the mid 1930's is a problem. As a result of this exchange I did stumble across a reference to a three page 1939 Wireless World article on the "infinite impedance", or reflex detector, in addition to the 1937 article I already have. I will have to try and run down a copy of the 1939 Wireless World article, is anyone out there a Wireless World collector, that might have a copy of the August 3, 1939 issue of Wireless World? Information on these old high performance AM envelope detectors is not the easiest thing to find. Regards, John Byrns Surf my web pages at, http://users.rcn.com/jbyrns/ |
#50
![]() |
|||
|
|||
![]() donut wrote: Patrick Turner wrote in : I suggest ppl who have doubt about this should go back to the old books, and do some real study, to save us from having to regurgitate what is in those textbooks. So off your bums, away from the PC and start reading!!!! 1) Some of us don't have access to the old books. 2) We are helping you keep your thought processes active. ![]() OK, then do some MORE research on established websites, if you can't find the old books, which are carried by many second hand bookstores, some of which list their books on their websites. I wish I had the time to restate what's in the text books all day, but I just don't, and regurgitation would send me barmy. And yet I don't like to see ppl continue in their ignorance, so you'll just have to put up with a curt suggestion from time to time. I like to try to enlighten folks about what might NOT be in the books or so obvious. I enjoy helping, and being there for ppl who try to help themselves, especially if they have done some serious research they from the available shelves full of info. No offence meant, And good luck with your projects, they usually take time, more time, and tomorrow, before they amount to much. Years later, when you see where you have been, your efforts were not in vain.. Patrick Turner. |
#51
![]() |
|||
|
|||
![]()
(John Byrns) wrote in message ...
In article , (firedome) wrote: Oh, I changed ISP... it's . I tried the westelcom ISP address that I had from when you emailed me late last year, and it bounced, but the user name was "fireflite", so I assume that was the problem. Is there an article lurking in this firedome/fireflite business? Only if you're into vintage DeSotos...another hobby...luckily, firedome can apply equally to a certain vacuum state amplification device... I wrote earlier today Walter, I didn't know he was still with us. Yes, I assume he is, he was back in January. Jeez, he must be up there agewise...interview him while you can! This old audio history needs to be preserved...I'm up to my ears with Mc, Pilot, and Stromberg-Carlson on my plate for the forseeable future, a couple years at least. You might want to talk to Will Rayment, I'm sure he'd be happy to oblige, eMail me for contact info... OK, thanks, but first I want to see if I can get directly in touch with Water Selsted, and ask him if he remembers how S-R became aware of the detector, as that was a question I didn't think of originally, and it is more interesting now that it appears he never published anything on the detector. An article on this AM circuit might make a good VTV submission, Charlie would welcome a well written piece on it I'd imagine... By "AM circuit" I assume you mean the entire tuner, not just the detector? I think the detector itself and evolution of dector design in general would make an interesting article... I am most interested in the history of the detector itself, and while I have seen it referred to as a diode detector followed by a cathode follower, I don't feel that is an accurate description, as the cathode follower is operating in a nonlinear mode. The Selsted Smith detector appears to me to be a slight variation on the so called "infinite impedance", or reflex detector, which was developed by RCA. The intended operation of the Selsted Smith detector is somewhat obscure, I have never seen a technical article that discusses its design and operation. I have been trying to run down some definite information on the RCA "infinite impedance", or reflex detector, presumably there is an RCA licensee Laboratories Bulletin describing its design and operation, but finding a source for the RCA licensee Bulletins from the mid 1930's is a problem. As a result of this exchange I did stumble across a reference to a three page 1939 Wireless World article on the "infinite impedance", or reflex detector, in addition to the 1937 article I already have. I will have to try and run down a copy of the 1939 Wireless World article, is anyone out there a Wireless World collector, that might have a copy of the August 3, 1939 issue of Wireless World? Information on these old high performance AM envelope detectors is not the easiest thing to find. Regards, John Byrns Surf my web pages at, http://users.rcn.com/jbyrns/ |
#52
![]() |
|||
|
|||
![]()
In article , Patrick Turner
wrote: John Byrns wrote: In article , (firedome) wrote: An article on this AM circuit might make a good VTV submission, Charlie would welcome a well written piece on it I'd imagine... By "AM circuit" I assume you mean the entire tuner, not just the detector? I am most interested in the history of the detector itself, and while I have seen it referred to as a diode detector followed by a cathode follower, I don't feel that is an accurate description, as the cathode follower is operating in a nonlinear mode. The Selsted Smith detector appears to me to be a slight variation on the so called "infinite impedance", or reflex detector, which was developed by RCA. The intended operation of the Selsted Smith detector is somewhat obscure, I have never seen a technical article that discusses its design and operation. I have been trying to run down some definite information on the RCA "infinite impedance", or reflex detector, presumably there is an RCA licensee Laboratories Bulletin describing its design and operation, but finding a source for the RCA licensee Bulletins from the mid 1930's is a problem. As a result of this exchange I did stumble across a reference to a three page 1939 Wireless World article on the "infinite impedance", or reflex detector, in addition to the 1937 article I already have. I will have to try and run down a copy of the 1939 Wireless World article, is anyone out there a Wireless World collector, that might have a copy of the August 3, 1939 issue of Wireless World? Information on these old high performance AM envelope detectors is not the easiest thing to find. The S&S detector has the IFT secondary grounded at one end of the coil, and the live end connected to a tube diode in series with 250k to ground. So the load seen by the IF amp tube is a part only of the reflected load of a diode turning on through an R, and in normal operation at a few volts, the diode conducts continuously, because the modulation is not always much more than 60%. If the diode "conducts continuously", why is it even in the circuit? Thus a load of about 250k+ is on the IFT, and driving tube, and this has a very small effect on the distortion, and far less effect than if there was a cap to charge as is the case with most normal detectors. The voltage at the top of the 250k is sent to a grid of a CF, and at the CF cathode, there is a 15k to ground, with some current flow, since the carrier input voltage means the average level is at a couple of volts. The second tube in the "S&S detector" is not a "CF", "CF means "Cathode Follower", and in the "S&S detector" circuit the cathode does not follow the grid, as it does in a true cathode follower. What you are calling the "CF" in the "S&S detector" circuit is actually noting more than our old friend the RCA "infinite impedance", or reflex detector. The question is how the diode added by "S&S" acts to reduce the distortion below the level of distortion produced by the reflex detector, if indeed it does? While the RDH4's explanation of the reasons for the distortion reduction seem valid as far as they go, I don't believe they are the main reason for the potential superiority of the "S&S" detector over the RCA reflex detector. I have a couple of ideas as to what is really going on in the circuit, unfortunately I don't have any way of proving if my ideas are correct or not, and this isn't a matter of building and testing the circuits, because that only shows one detector has lower distortion than the other, it doesn't explain why. There is a 150pF across the 15k, and this is charged positively by the 455 kHz charge peaks, just like a mains halfwave rectifier. the 15k tries to discharge the cap, so the voltage at the CF cathode is like the ripple voltage of a power rectifier, sawtooth shaped. The AF modulation causes the AF voltage to vary at the cathode, just like a changing mains voltage will give a changing DC voltage at the output of a powe rectifier. After the cathode detection, the S&S detected signal is fed to an output to an audio amp, via a 0.1 uF and 1M bias resistor. Exactly, it's not really a "CF". That's what is shown on page 1,495 of RDH4. BUT, some 455 kHz ripple voltage will remain in this circuit, so it should be filtered out further with say an extra LPF RC filter, perhaps 50k, then another 150 pF, which would have a -3dB pole at 20 kHz, allowing a cleaner audio signal to get to the AF amp. The thd quoted for this detector is 0.4% at 4 Khz of AM modulation, at 80% modulation. And 0.33% at 420 Hz of AM modulation, at 100% modulation. I think it can be improved easily, with the diode placed AFTER the CF, not before, to remove all loading effects on the IF amp, whose thd is NOT included in the graph for detector distortion ( we can assume ), in RDH4. It isn't at all clear why this should make a superior detector? Then the CF can be a 12AT7, so in CF, its thd will be far less than a 12AU7. Then the idle current operation of the CF should be with say 1.5 mA flowing down via a 30k RL, or more, with the IF secondary biased up at about +40v. The diode can be a germanium type, and set up with 0.5mA of current from a R to some -Ve voltage, and this eliminates large variations in diode forward voltage variations, even at low signal levels, so the diode then contributes SFA thd since it spends its life turned on all the time. If indeed the diode does spend "its life turned on all the time", then I suspect that it would not make a particularly linear detector, because of the portion of its characteristic curve that would imply it was operating on. Also it is my understanding that even with a biased diode of the type that doesn't spend "its life turned on all the time", the bias must change with signal level, or distortion the won't be minimized. This means that either a very tight AGC circuit must be used, or the bias applied to the diode must be made to track the signal level presented to the diode. The value of C charged by the diode is determined by the idle current flowing in the diode bias resistor, and should be determined experimentally. One of these days I'll publish my notes. I suspect there is a bit of partisan bias in your recommendation of this detector circuit, that is unrelated to its performance. Expect detector to have less than 0.1% thd at any modulation F, and up to 100% modulation. I sure would like to have an AM generator that could produce a signal with less than 0.1% distortion at 100% modulation, so I could measure these effects. I wonder what Walter might say about all this. Probably not too much, I suspect he forgot the details of the "S&S detector" a long time ago, after all he had much more momentous things to think about. I am told that Walter was the inventor of the transverse recording scheme used in the Quadraplex video recorders that revolutionized television broadcasting back in the 1950s. Regards, John Byrns Surf my web pages at, http://users.rcn.com/jbyrns/ |
#53
![]() |
|||
|
|||
![]()
donut wrote:
(John Byrns) wrote in news:jbyrns-1307031343160001@216-80- 74-203.d.enteract.com: Thanks, I will check the "oldradioparts" site, I never noticed that AES had any of the J.W. Miller IF Transformers that I am interested in. On the AES site, hit Parts then Coils and coil forms. The Miller NOS coils are listed near the bottom of the page. Several IF transformers, though hard to tell if they are tube or transistor types. I have a 1979 J.W.Miller catalog, if you need something looked up. -- Michael A. Terrell Central Florida |
Reply |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
on topic: we need a rec.audio.pro.ot newsgroup! | Pro Audio | |||
Some Recording Techniques | Pro Audio | |||
common mode rejection vs. crosstalk | Pro Audio |