![]() |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
For sale
Working DynacoFM3 with extra tubes sounds great, pulls in strong Non-tested FM-1 with extra tubes Both are very good cosmetically Also available is a PAT 4 non- tube Thank you Mike Mueller |
Ads |
#2
|
|||
|
|||
![]()
And the prices would be?
Peter Wieck Wyncote, PA |
#3
|
|||
|
|||
![]() |
#4
|
|||
|
|||
![]()
Mike:
Does the FM-1 have the stereo board and the EMM-801, or is it the original mono? Brass or Aluminum front? Thanks! Peter Wieck Wyncote, PA |
#5
|
|||
|
|||
![]() |
#6
|
|||
|
|||
![]()
Mike:
Is the FM1 stereo or not? The point being that I happen to have a multiplex decoder that is looking for a good mono tuner. So, it does make a difference. Thanks! Peter Wieck Wyncote, PA |
#7
|
|||
|
|||
![]() |
#8
|
|||
|
|||
![]()
Mike:
I am fine with "untested" but I would like the unit to have all its tubes (and shields) in place, with special reference to the EM-80, as I believe this unit has ILO the EMM-801, and that it has not been dropped, soaked or moused. If this is the case, then: Please quote a price FOB 19095. And do so by direct e-mail. There is no need for this to proceed further in public. Thanks, Peter Wieck Wyncote, PA |
#9
|
|||
|
|||
![]()
" > said:
>I am fine with "untested" but I would like the unit to have all its >tubes (and shields) in place, with special reference to the EM-80, as I >believe this unit has ILO the EMM-801, If you need either one of those, let me know. -- - Never argue with idiots, they drag you down their level and beat you with experience. - |
#10
|
|||
|
|||
![]()
I will try this again.... if it shows up from before, my apologies for
repetition: >If you need either one of those, let me know. Why, thank you! I have nib spares of both, but I hate to dip into them if not absolutely necessary. Peter Wieck Wyncote, PA |
Thread Tools | |
Display Modes | |
|
|