Reply
 
Thread Tools Display Modes
  #1   Report Post  
 
Posts: n/a
Default Spectra Sonics 110 Amplifier cards, setting up!

I recently purchased a bunch of these and would like to make some mic
pre's and line amps out of them. What would I need, what were the
original transformers used? Company only sent a data sheet, said
nothing else was available. I found the pin-outs in the archives and
power requirements. But am looking for info regarding mods and what I
exactly need to get them running. I figure a input and output
transformer and a pot. But was wondering about real world experience
with these. I have read great things and would like some direction. Any
schematics out there?

  #2   Report Post  
 
Posts: n/a
Default

Anyone

Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
hybrid blumlein using 4 cards? jnorman Pro Audio 8 November 9th 04 03:57 PM
rec.audio.car FAQ (Part 2/5) Ian D. Bjorhovde Car Audio 0 March 6th 04 07:54 AM
ub1622fx-pro dc voltage - stereo channels at -10 setting lnatcbass Pro Audio 0 February 26th 04 07:56 AM
WANTED: JBL DX-1 Input/Output High/Low Frequency Crossover Cards to suit JBL's XPL-200 Speakers news General 0 January 1st 04 03:47 PM
JBL XPL-200 Input/Ouput Cards for JBL's DX-1 Crossover Itchy'n'Scratchie General 0 November 4th 03 03:21 PM


All times are GMT +1. The time now is 11:52 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"