Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tubes
|
|||
|
|||
The bane of DC Power
Edison pioneered power distribution, but it was DC power. DC power
for houses pretty well petered out (at least in the US) around WW1 but it lingered into apartment buildings and other urban highrises in certain areas in the Northeast, in Chicago and perhaps Cleveland and Detroit (not sure about those two) until after WWII. JFK and MM were dead and buried (or put in the granite filing cabinet) and Vietnam raged like the fires of peritonitis when the last sizable numbers of residential DC lines were changed over and a few stragglers in Manhattan south of Central Park had it into the Disco Era. At first one might think DC in the house would be neat. You could build a tube radio with no rectifier tube, and indeed a very few were built for 110 DC Only saving the rectifier tube. (They were also used for boats with 110 VDC systems.) But indeed it was a curse, like women's periods except it was all the time and not just once a month. You couldn't have a transformer, obviously. Dynamotors worked, but at spectacular inefficiency and expense and noise. Noise was a big issue not only from DC motors, dynamotors and vibrator inverters, but also from every switch in the building. Boy they popped with a big arc. In a large residential building listening to the radio was a constant irritant from the switch buzzing. Why were these buildings DC? Two reasons, one being that many of them were in the vanguard of technology when they were built, at a time when many houses had no electricity. DC was used and Edison was the supplier for many of them, any big building had a steam plant for heat and an electric plant for lighting, and they were often interrelated. Steam drove the generator. Later, when there was a utility, making your own juice was cheaper for the building landlords, or buying it off the nearby rail or trolleybus system. The history of this is most fascinating and I have not found any really comprehensive historical treatment of DC and low cycle power to consumers in the US. If anyone knows of a good one please feel free to cite it. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Do power amps need to deliver twice the power into half the impedance to be any good? | High End Audio | |||
fs -416ph 48 , 2 New sankens cos11 ,2 k-3u power supplies ,mzk-10 power supply | Pro Audio | |||
FA Avel toriod power xformer/power supply w/ dig-analog convertor | Pro Audio | |||
FS: Shunyata Sidewinder Gold Power Snake Power Cable | Marketplace |