Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Vintage Amplifiers for Idiots
Hi,
I would very much appreciate a minute of your time. The sum of my knowledge of electrical safety basically amounts to knowing a three-prong adapter on a two-prong plug doesn't ground an appliance, but having caught the "vintage virus" recently, I went shopping on eBay for a low-wattage guitar amp. A hand-wired, point-to-point, class A vintage tube amp for that "mojo' tone - that's the ticket! My ignorance was bliss. I think I have begun a journey to actually learning a thing or two about a crucial subject, but for now I am overwhelmed to the point that I've concluded it is not safe for me to buy a vintage amp for home use. I value the lives of my loved ones, myself included. What troubles me is the idea of less-suspecting musicians buying into a potentially lethal decision. Approaching a group of "tube-heads" for simple safety advice is inviting derision, but conscientiously I must. Call it my civic-duty or anal-retentiveness, but I will feel irresponsible if I don't. Will you guys and gals please share your educated, or hard-learned, or innate electrical common sense and offer your suggestions for essential rules of safety for musicians buying vintage amplifiers? This is a serious inquiry. I recently initiated and then negotiated out of the purchase of a Silvertone 1451. I liked the way it looked, the price was right, and the seller said he had performed a complete cap job. Only because this model was so rare did I have to search endlessly for nights on end to come to the conclusion that I better not get it. Realizing it may be difficult to put yourself in an idiot's shoes (not that you'd care to), below is my personal example to which I'm not asking specific answers except as in regards to a bigger picture of more general safety rules: This is what little I know and the conclusions, right or wrong, that I came to: The tube lineup was 50C5, 35W4, and 12AU6 which I think puts it in the "Radio tube" amp class. Now I believe it has a power transformer, so I think that means it does not have a "death cap". It probably does not have an isolation transformer, a schematic is on the way. Soooo. the two prong plug must be correctly plugged into the outlet first of all. Even so, I believe there are extenuating circumstances that could still make the chassis "hot" and possibly the simultaneous touching of the guitar and chassis, or guitar and mic, or other loop could be dangerous. I think that one solution would be to properly install a three-prong plug using the following example: "With the unit unplugged and the filter caps discharged, cut or de-solder the old, two-wire, line cord from the fuse and switch. While you're at it, get rid of the cap from the switch to chassis ground (leave that ground lug, though!)" http://www.rru.com/~meo/Guitar/Amps/...Mods/safe.html and run the ground to the ground lug, the black to the fuse (install a fuse if not present) and white to the transformer. I am still unclear if adding an isolation transformer is necessary once this has been accomplished. So you can see the mess I got myself in. A lot of these amps are being listed on eBay because people are paying stupid money for anything with a tube in it. A lot of three-prong plugs have been added and hopefully correctly, but that too should be assessed with caution. I'm hoping for a check-list kind of guide or rules set or possible scenarios that could serve as a warning to others. A list of known problem amps and designs or a link to such would be helpful. If that proves impractical or ill-advised in its own right, then at least I've tried to address this issue. I'm not trying to minimize the precautions and warnings already advocated by you guys and every other safety advocate. I'm just hoping for something new that will reach the people like me - uniformed ebayers potentially buying more than they bargained for. If you've read this far then I thank you very much for your consideration. Sincerely, Dan Silvertone, Harmony, Sears, Wards, Valco, Supra, Heath, Bogen, Gibson, Fender, |
#2
|
|||
|
|||
D. Lemon wrote:
This is what little I know and the conclusions, right or wrong, that I came to: The tube lineup was 50C5, 35W4, and 12AU6 which I think puts it in the "Radio tube" amp class. Now I believe it has a power transformer, so I think that means it does not have a "death cap". That is kind of wacky... the reason you use a tube lineup like that is so you don't need a power transformer. The 50V and 35V filaments are intended for series string applications so you can build gear (like table radios) with hot chassis and no power transformer. Look at the chassis. How many transformers do you see? You should see two, one for the audio output (the secondary of which goes to the speaker) and one for the power (the primary of which goes to the power line). If you see only one (and things that look like transformers but have only two wires coming out are chokes and do not count), you have a hot chassis amp. It probably does not have an isolation transformer, a schematic is on the way. The isolation transformer is something that people add on as an aftermarket retrofit, to isolate hot chassis amps. You do not need such a thing if you have a power transformer. If you have a hot chassis design without a power transformer, retrofitting one might be a good idea. I think that one solution would be to properly install a three-prong plug using the following example: "With the unit unplugged and the filter caps discharged, cut or de-solder the old, two-wire, line cord from the fuse and switch. While you're at it, get rid of the cap from the switch to chassis ground (leave that ground lug, though!)" http://www.rru.com/~meo/Guitar/Amps/...Mods/safe.html That is a good idea on every product ever made, actually. But isolating a hot chassis design is still a good idea. If that proves impractical or ill-advised in its own right, then at least I've tried to address this issue. I'm not trying to minimize the precautions and warnings already advocated by you guys and every other safety advocate. I'm just hoping for something new that will reach the people like me - uniformed ebayers potentially buying more than they bargained for. Look, just the crazy prices that this junk is fetching on Ebay is scary enough.... --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#3
|
|||
|
|||
Look at the chassis. How many transformers do you see? You should see two, one for the audio output (the secondary of which goes to the speaker) and one for the power (the primary of which goes to the power line). If you see only one (and things that look like transformers but have only two wires coming out are chokes and do not count), you have a hot chassis amp. If his amp has the same circuit as the Silvertone 1430, which has the same tube lineup, then he will have 2 transformers. One of them will be the output transformer; the other is a *filament* transformer for the 12AU6. This circuit is kind of goofy. If you try to convert it to 3-wire, the most reasonable way to do so would be to hook the hot wire to the fuse and the neutral to the switch. This means that even when the power switch is off, several parts of the circuit will still be live relative to the chassis. Note that this would *not* be the case with a 2-wire cord, though with a 2-wire cord parts of the circuit would still be hot relative to your cold water pipe. If I were putting in a 3-wire cord, I'd put the hot wire (black) on the switch, then hook the other end of the switch to the fuse. I'd put the neutral wire on the B-. "With the unit unplugged and the filter caps discharged, cut or de-solder the old, two-wire, line cord from the fuse and switch. While you're at it, get rid of the cap from the switch to chassis ground (leave that ground lug, though!)" http://www.rru.com/~meo/Guitar/Amps/...Mods/safe.html The problem with doing that on this circuit is that you will then route part of the signal path through your power cord, your electrical service entrance, and back to the neutral wire. That seems like a recipe for noise. Maybe I'm wrong, but I would leave the capacitor in, after making sure that 1) Either it is a U. L. Listed capacitor specifically made for this job (they did make them), or 2) (Not as good) You use a 1000V disc ceramic and heat-shrink a piece of tubing around it so that it is well insulated. At least that's what I would do --- and I'd never give the thing away or sell it for fear of liability. -- Fred Gilham || "If I thought there was anything at all in your arguments, I should have to be not only a theist, but an Episcopalian to boot," he said, after one interchange, reckoning that since Episcopalianism was, in his book, that than which nothing could be worse, this was an effective reductio ad absurdum. - J. R. Lucas |
#4
|
|||
|
|||
|
#5
|
|||
|
|||
Here's a different approach:
Go the hardware store and buy a GFCI outlet, three wire cord and electrical box. Wire up the cord to the GFCI and enclose it in the electrical box. Plug your GFCI into the wall, and plug the amp into the GFCI. The GFCI will protect you from unsafe leakage, while allowing you to leave your amp in its "vintage" condition. Just be sure to test your GFCI frequently, especially when you change locations (in case you're plugged into a mis-wired outlet). Mis-wired outlets can be dangerous with or without GFCI, but at least the GFCI lets you test it first. |
#6
|
|||
|
|||
"Karl Uppiano" wrote in message news:cGxnd.830$Nh1.377@trnddc09... Here's a different approach: Go the hardware store and buy a GFCI outlet, three wire cord and electrical box. Wire up the cord to the GFCI and enclose it in the electrical box. Plug your GFCI into the wall, and plug the amp into the GFCI. The GFCI will protect you from unsafe leakage, while allowing you to leave your amp in its "vintage" condition. Just be sure to test your GFCI frequently, especially when you change locations (in case you're plugged into a mis-wired outlet). Mis-wired outlets can be dangerous with or without GFCI, but at least the GFCI lets you test it first. Ha! They make these things: http://www.aquaticeco.com/index.cfm/...11580/cid/3017 |
#7
|
|||
|
|||
"Karl Uppiano" wrote in message
news:cGxnd.830$Nh1.377@trnddc09 Here's a different approach: Go the hardware store and buy a GFCI outlet, three wire cord and electrical box. Wire up the cord to the GFCI and enclose it in the electrical box. Plug your GFCI into the wall, and plug the amp into the GFCI. The GFCI will protect you from unsafe leakage, while allowing you to leave your amp in its "vintage" condition. Just be sure to test your GFCI frequently, especially when you change locations (in case you're plugged into a mis-wired outlet). Mis-wired outlets can be dangerous with or without GFCI, but at least the GFCI lets you test it first. The good news is that one can buy GFCI-protected extension cords, ready-built. http://doityourself.com/store/5861414.htm http://store.watergardenweb.com/gfcitriptapw.html and GFCI outlet adaptors http://shop.store.yahoo.com/dajo/adplug3wirgf.html http://www.morebeer.com/product.html?product_id=16524 |
#8
|
|||
|
|||
"Mike Rivers" wrote in message Lots of people used amplifiers like this and stayed alive. There is nothing inherently unsafe about not having a safety ground as long as the amplifier is properly designed One and there isn't enough current leakage to the chassis so that something you might touch (like a guitar plugged into the amplifier, which connects it to the chassis) becomes hot with respect to the earth. Two must not have any defective capacitors - a safe bet if it's just had a "cap job" but may be worth checking out if it's truly in vintage/virgin condition. Three - I'm getting twitchy... Chicken! Yes I suppose that there may have been some cheap transformerless amplifiers built along the same lines as transformerless AC/DC radios of the '50's, but that's not on your radar. Good, I feel better for the guy who just bought it... If I were you, I'd get one that hasn't been buggered and then make your own decision as to whether you want to change the power cord or not. I bought Jason's "Champ" http://boozhoundlabs.com/champ/ You aren't going to change the world, particularly not the eBay world, where you can never be sure of what you're getting. Mike, thanks for responding, I have a lot of respect for you. But, I AM going to change the world, my Mom says so. However, in the meantime, maybe someone will benefit from this... Thanks very much for all responses. Sincerely, Dan |
#9
|
|||
|
|||
Karl Uppiano wrote:
Go the hardware store and buy a GFCI outlet, three wire cord and electrical box. Wire up the cord to the GFCI and enclose it in the electrical box. Plug your GFCI into the wall, and plug the amp into the GFCI. The GFCI will protect you from unsafe leakage, while allowing you to leave your amp in its "vintage" condition. On these amplifiers, the GFCI will pop instantly as soon as you plug a guitar in. On the metal-cased amplifiers, the GFCI will pop as soon as you put it on the floor. The GFCI is a wonderful thing because it shuts off a device that has unsafe leakage. BUT, it shuts down a device with leakage levels that were considered quite normal for consumer electronics back in the fifties. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#11
|
|||
|
|||
If you are buying a vintage amplifier for collection value that is one
thing. If you are buying for playing value that is another. If you are worried about the amps safety, that means you are going to play the amp. I would suggest you take it to an amp tech and tell him to check it out safety-wise. It is fairly simple to put a three prong plug on an amp, although I don't remember us getting shocked by the old two prongs. But three prong is safer. I am not sure there is really a good reason to buy an old amp for "tone" sake. There is a plethero of quality amps out there, designs have improved and workmanship is better than ever. But if you have your heart set on an old Silverface then go ahead and get one. Just take it to an amp tech (preferably before buying if the seller will let you, probably won't). You might want to buy from a guitar store, many carry older, throughly checked out amps that will aleviate some of your concerns. "D. Lemon" wrote in message ... Hi, I would very much appreciate a minute of your time. The sum of my knowledge of electrical safety basically amounts to knowing a three-prong adapter on a two-prong plug doesn't ground an appliance, but having caught the "vintage virus" recently, I went shopping on eBay for a low-wattage guitar amp. A hand-wired, point-to-point, class A vintage tube amp for that "mojo' tone - that's the ticket! My ignorance was bliss. I think I have begun a journey to actually learning a thing or two about a crucial subject, but for now I am overwhelmed to the point that I've concluded it is not safe for me to buy a vintage amp for home use. I value the lives of my loved ones, myself included. What troubles me is the idea of less-suspecting musicians buying into a potentially lethal decision. Approaching a group of "tube-heads" for simple safety advice is inviting derision, but conscientiously I must. Call it my civic-duty or anal-retentiveness, but I will feel irresponsible if I don't. Will you guys and gals please share your educated, or hard-learned, or innate electrical common sense and offer your suggestions for essential rules of safety for musicians buying vintage amplifiers? This is a serious inquiry. I recently initiated and then negotiated out of the purchase of a Silvertone 1451. I liked the way it looked, the price was right, and the seller said he had performed a complete cap job. Only because this model was so rare did I have to search endlessly for nights on end to come to the conclusion that I better not get it. Realizing it may be difficult to put yourself in an idiot's shoes (not that you'd care to), below is my personal example to which I'm not asking specific answers except as in regards to a bigger picture of more general safety rules: This is what little I know and the conclusions, right or wrong, that I came to: The tube lineup was 50C5, 35W4, and 12AU6 which I think puts it in the "Radio tube" amp class. Now I believe it has a power transformer, so I think that means it does not have a "death cap". It probably does not have an isolation transformer, a schematic is on the way. Soooo. the two prong plug must be correctly plugged into the outlet first of all. Even so, I believe there are extenuating circumstances that could still make the chassis "hot" and possibly the simultaneous touching of the guitar and chassis, or guitar and mic, or other loop could be dangerous. I think that one solution would be to properly install a three-prong plug using the following example: "With the unit unplugged and the filter caps discharged, cut or de-solder the old, two-wire, line cord from the fuse and switch. While you're at it, get rid of the cap from the switch to chassis ground (leave that ground lug, though!)" http://www.rru.com/~meo/Guitar/Amps/...Mods/safe.html and run the ground to the ground lug, the black to the fuse (install a fuse if not present) and white to the transformer. I am still unclear if adding an isolation transformer is necessary once this has been accomplished. So you can see the mess I got myself in. A lot of these amps are being listed on eBay because people are paying stupid money for anything with a tube in it. A lot of three-prong plugs have been added and hopefully correctly, but that too should be assessed with caution. I'm hoping for a check-list kind of guide or rules set or possible scenarios that could serve as a warning to others. A list of known problem amps and designs or a link to such would be helpful. If that proves impractical or ill-advised in its own right, then at least I've tried to address this issue. I'm not trying to minimize the precautions and warnings already advocated by you guys and every other safety advocate. I'm just hoping for something new that will reach the people like me - uniformed ebayers potentially buying more than they bargained for. If you've read this far then I thank you very much for your consideration. Sincerely, Dan Silvertone, Harmony, Sears, Wards, Valco, Supra, Heath, Bogen, Gibson, Fender, |
#12
|
|||
|
|||
"Scott Dorsey" wrote in message ... Karl Uppiano wrote: Go the hardware store and buy a GFCI outlet, three wire cord and electrical box. Wire up the cord to the GFCI and enclose it in the electrical box. Plug your GFCI into the wall, and plug the amp into the GFCI. The GFCI will protect you from unsafe leakage, while allowing you to leave your amp in its "vintage" condition. On these amplifiers, the GFCI will pop instantly as soon as you plug a guitar in. On the metal-cased amplifiers, the GFCI will pop as soon as you put it on the floor. On insulated floors like wood, carpet, rubber, etc.? Not even worth a try? If it pops, turn the plug over. Capacitive coupling into thin air at 60Hz 5mA seems rather unlikely. The GFCI is a wonderful thing because it shuts off a device that has unsafe leakage. BUT, it shuts down a device with leakage levels that were considered quite normal for consumer electronics back in the fifties. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#13
|
|||
|
|||
play-on playonATcomcast.net wrote:
As a guitarist and tube amp fan, I avoid amps that use tubes that are not common. I think you'll be happier in the long run with amps that use 12AX7, 6V6, EL84, etc etc. Not common? If it's used in AA5 table radios, it's one of the most common tubes around. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#14
|
|||
|
|||
Man, you are putting way, way, way too much thought into this. You
want to get a little low wattage tube amp....get one. Don't worry about converting a 3 watt amp to a grounded plug. It's not like the same punch as a vintage Ampeg SVT, Sunn or Acoustic will give you. Wasn't it an Acoustic amp that killed the guy from Uriah Heep? Anyway....you missed a good one on that little Silvertone. Those are great sounding bedroom and studio amps. Funky little circuits, yes, but they sound great. later, m |
#15
|
|||
|
|||
chetatkinsdiet wrote:
Don't worry about converting a 3 watt amp to a grounded plug. It's not like the same punch as a vintage Ampeg SVT, Sunn or Acoustic will give you. Famous last words? |
#16
|
|||
|
|||
chetatkinsdiet wrote: Man, you are putting way, way, way too much thought into this. You want to get a little low wattage tube amp....get one. Don't worry about converting a 3 watt amp to a grounded plug. It's not like the same punch as a vintage Ampeg SVT, Sunn or Acoustic will give you. Wasn't it an Acoustic amp that killed the guy from Uriah Heep? Anyway....you missed a good one on that little Silvertone. Those are great sounding bedroom and studio amps. Funky little circuits, yes, but they sound great. later, m A hot chassis has *no* relationship to the output power of the amplifier. Touching one is *exactly* the same as grabbing a bare wire connected to the AC line. If you're grounded, you'll get the **** shocked out of you, whether the amp is 1 watt or 10,000. You might die from it. *You* have no business handing out safety information. Go practice your scales (or, if you're a rock player, your scale) and leave the tech stuff to the people who know it. Lord Valve Expert |
#17
|
|||
|
|||
"chetatkinsdiet" wrote in message ... Man, you are putting way, way, way too much thought into this. You want to get a little low wattage tube amp....get one. Don't worry about converting a 3 watt amp to a grounded plug. It's not like the same punch as a vintage Ampeg SVT, Sunn or Acoustic will give you. This was tongue in cheek right? You do know the audio output wattage of an amplifier is in no way related to the risk of being electrocuted by the AC going into the amp from the outlet right? If not, be afraid, be very afraid... lol |
#18
|
|||
|
|||
"JoeT" noway@today wrote in message ... "chetatkinsdiet" wrote in message ... Man, you are putting way, way, way too much thought into this. You want to get a little low wattage tube amp....get one. Don't worry about converting a 3 watt amp to a grounded plug. It's not like the same punch as a vintage Ampeg SVT, Sunn or Acoustic will give you. This was tongue in cheek right? You do know the audio output wattage of an amplifier is in no way related to the risk of being electrocuted by the AC going into the amp from the outlet right? If not, be afraid, be very afraid... lol It is no laughing matter. You have a very good chance of ending up seriously deceased. I wouldn't go near a hot chassis without a good isolation transformer. |
#19
|
|||
|
|||
|
#21
|
|||
|
|||
Well, as a former tube amp technician who has been shocked more times
with more volts than I would care to count, I would say suck it up. Yeah it hurts but you'll most probobly live. I mean put a wind screen on your mic. (Nothin like being bit right on the lip) If your left hand is on the guitar strings and you touch the chassis with your right hand and get a good jump start, well, you wont do that again will ya? I think I'll keep my fingers on the plastic knobs. (they're plastic for a reason) Basically, don't F with fire if you don't want to get burned. And especially, don't let you kids play with old tube amps. By the way the only guitar amp I've ever seen with only one transformer is a SilverTone amp-in-a-case design. I forget the actual tube compliment, but basically consisted of a rectifier, a preamp tube, and an output tube. This only works because the three filiment voltages added up to 120 volts (50+50+20 (or 30) and all the tubes were capable of running off 120 Volts DC. Anyway, my advice is to not buy equipment you are afraid of, no matter if it has 2 prongs, 3 prongs, a GFCI, a fuse, or creates zero gravity and a stable worm hole. If it scares you, buy modern tube equipment. Bulldog \ (Doug) wrote in message om... If you are buying a vintage amplifier for collection value that is one thing. If you are buying for playing value that is another. If you are worried about the amps safety, that means you are going to play the amp. I would suggest you take it to an amp tech and tell him to check it out safety-wise. It is fairly simple to put a three prong plug on an amp, although I don't remember us getting shocked by the old two prongs. But three prong is safer. I am not sure there is really a good reason to buy an old amp for "tone" sake. There is a plethero of quality amps out there, designs have improved and workmanship is better than ever. But if you have your heart set on an old Silverface then go ahead and get one. Just take it to an amp tech (preferably before buying if the seller will let you, probably won't). You might want to buy from a guitar store, many carry older, throughly checked out amps that will aleviate some of your concerns. "D. Lemon" wrote in message ... Hi, I would very much appreciate a minute of your time. The sum of my knowledge of electrical safety basically amounts to knowing a three-prong adapter on a two-prong plug doesn't ground an appliance, but having caught the "vintage virus" recently, I went shopping on eBay for a low-wattage guitar amp. A hand-wired, point-to-point, class A vintage tube amp for that "mojo' tone - that's the ticket! My ignorance was bliss. I think I have begun a journey to actually learning a thing or two about a crucial subject, but for now I am overwhelmed to the point that I've concluded it is not safe for me to buy a vintage amp for home use. I value the lives of my loved ones, myself included. What troubles me is the idea of less-suspecting musicians buying into a potentially lethal decision. Approaching a group of "tube-heads" for simple safety advice is inviting derision, but conscientiously I must. Call it my civic-duty or anal-retentiveness, but I will feel irresponsible if I don't. Will you guys and gals please share your educated, or hard-learned, or innate electrical common sense and offer your suggestions for essential rules of safety for musicians buying vintage amplifiers? This is a serious inquiry. I recently initiated and then negotiated out of the purchase of a Silvertone 1451. I liked the way it looked, the price was right, and the seller said he had performed a complete cap job. Only because this model was so rare did I have to search endlessly for nights on end to come to the conclusion that I better not get it. Realizing it may be difficult to put yourself in an idiot's shoes (not that you'd care to), below is my personal example to which I'm not asking specific answers except as in regards to a bigger picture of more general safety rules: This is what little I know and the conclusions, right or wrong, that I came to: The tube lineup was 50C5, 35W4, and 12AU6 which I think puts it in the "Radio tube" amp class. Now I believe it has a power transformer, so I think that means it does not have a "death cap". It probably does not have an isolation transformer, a schematic is on the way. Soooo. the two prong plug must be correctly plugged into the outlet first of all. Even so, I believe there are extenuating circumstances that could still make the chassis "hot" and possibly the simultaneous touching of the guitar and chassis, or guitar and mic, or other loop could be dangerous. I think that one solution would be to properly install a three-prong plug using the following example: "With the unit unplugged and the filter caps discharged, cut or de-solder the old, two-wire, line cord from the fuse and switch. While you're at it, get rid of the cap from the switch to chassis ground (leave that ground lug, though!)" http://www.rru.com/~meo/Guitar/Amps/...Mods/safe.html and run the ground to the ground lug, the black to the fuse (install a fuse if not present) and white to the transformer. I am still unclear if adding an isolation transformer is necessary once this has been accomplished. So you can see the mess I got myself in. A lot of these amps are being listed on eBay because people are paying stupid money for anything with a tube in it. A lot of three-prong plugs have been added and hopefully correctly, but that too should be assessed with caution. I'm hoping for a check-list kind of guide or rules set or possible scenarios that could serve as a warning to others. A list of known problem amps and designs or a link to such would be helpful. If that proves impractical or ill-advised in its own right, then at least I've tried to address this issue. I'm not trying to minimize the precautions and warnings already advocated by you guys and every other safety advocate. I'm just hoping for something new that will reach the people like me - uniformed ebayers potentially buying more than they bargained for. If you've read this far then I thank you very much for your consideration. Sincerely, Dan Silvertone, Harmony, Sears, Wards, Valco, Supra, Heath, Bogen, Gibson, Fender, |
#22
|
|||
|
|||
"Mike Rivers" wrote in message news:znr1100992438k@trad... In article writes: It is no laughing matter. You have a very good chance of ending up seriously deceased. I wouldn't go near a hot chassis without a good isolation transformer. My point (and that of the manufacturers) is that the chassis isn't hot unless the amplifier is broken. I don't drive cars when I know there's a leak in a brake line either. But you don't necessarily know there's a leak in the brake until you are driving, and try to stop. geoff |
#23
|
|||
|
|||
|
#24
|
|||
|
|||
|
#25
|
|||
|
|||
"D. Lemon" wrote in message ...
Hi, .... Will you guys and gals please share your educated, or hard-learned, or innate electrical common sense and offer your suggestions for essential rules of safety for musicians buying vintage amplifiers? ... Sincerely, Dan Hi Dan; Sure...here's a few bits of common sense to apply in your quest for tone. 1. No pain, no gain. - Buying old electrical gear, especially without seeing it first (like ebay, for example) has inherent risk. So does playing ice hockey. 2. Double it and Add Thirty.- Like converting from celcius to fahrenheit, vintage gear will probably cost more than double what you thought by the time all is said and done. 3. Total Harmonic Distortion.- When I was young and stupid, THD was the unit of measurement in home audio equipment...less THD meant more $$$. Vintage amps are the same way...my experience and common sense says there are people spending farrr too much money to achieve tone on a scale of diminishing returns. Buying a shrubbery, a really nice one, might be just as advisable, because none of us is going to be Jimmy Page. 4. Rubber soles.- I'm pretty sure most rockers wear Doc Martens for a very good reason. 5. Snobbery.- Avoid it. There will always be someone ready to tell you why your gear sucks. 6. Some Gear I Know.- You asked for recomendations. Someone's already mentioned vintage Traynor tube amps. I'd second that suggestion and add Garnet, possibly Pine. All were CSA Approved in their day and built to last...I've yet to see a suspiciously wired old Traynor or Garnet. Have fun! |
#26
|
|||
|
|||
|
#27
|
|||
|
|||
I appreciate the time you've taken to respond and some areas are still under
discussion. There are too many issues for me to summarize what I've learned but I intend to return and do that at the first of the year. I do think I will keep reading and buy a neon tester and outlet tester to start. My intent was to address the issue and hopefully make someone somewhere think. If I were to stretch for a simple, preliminary conclusion, it would be this: CAUTION: If you want a little amp just for playing at home, and especially if you have children, don't buy a vintage tube amp unless you know what you are doing. That may be stating the obvious but there it is, for now. It may be hard for some to believe, but it's easy to reach this purchase plan when you hear how simple those old point-to-point amps are, so easy to fix that hand-wiring, any repairman can do it, screw those circuit boards... Even portfolio managers are advising clients to diversify into vintage gear so it's a great investment, what are you waiting for, prices are going up as we speak.... Sometimes it's difficult to stand outside the box so I wonder if some of the "veterans" may be a little too cavalier in their approach - but honestly that is to be expected in any field. Maybe I AM being too cautious, maybe I AM thinking too hard on this, but I better figure that out first. My little girl is worth more to me than anything else in the world. I don't mind looking foolish if it is erring on the cautious side - the best advice so far. I sincerely appreciate the time and efforts of all you have responded. Dan |
#28
|
|||
|
|||
|
#29
|
|||
|
|||
Sander deWaal wrote in message . ..
(bulldog) said: Well, as a former tube amp technician who has been shocked more times with more volts than I would care to count, I would say suck it up. Yeah it hurts but you'll most probobly live. You'd sell an amp with a safety risk to an unsuspecting customer? I wouldn't . First of all I didn't sell amps. I repaired them. The owner already knew his amplifier. He knew what to do and not to do. He also knew what he should touch and what not to touch. Old 2 prong tube amps had their safety issues, but the owners accepted that, and continued using them because they liked them. Remember, the type of equipment in question was built long before everybody started seuing everybody else. Bulldog |
#30
|
|||
|
|||
Was I giving out advice?
You are such a blowhard.....no wonder you're hated so much on the net..... m |
#31
|
|||
|
|||
chetatkinsdiet wrote: Was I giving out advice? Yes. "Don't worry about converting a 3 watt amp to a grounded plug. It's not like the same punch as a vintage Ampeg SVT, Sunn or Acoustic will give you." You're a technical ignoramus, and that statement proves it...in spades. It's advice, and it's *dangerous* advice. Next time, shut the **** up. You are such a blowhard.....no wonder you're hated so much on the net..... Knowing your **** will get you hated in lots of places. Like I said - go practice your scale and leave the tech stuff to the techs. Lord Valve Expert |
#32
|
|||
|
|||
Geoff Wood wrote:
My point (and that of the manufacturers) is that the chassis isn't hot unless the amplifier is broken. I don't drive cars when I know there's a leak in a brake line either. But you don't necessarily know there's a leak in the brake until you are driving, and try to stop. And you don't necessarily know the amp chassis is hot until the bass player tries to hand you a joint (or a beer, or a soda) at rehearsal. Then, if there's a potential difference between the chassis of the two amps, BOTH players get zapped. It doesn't matter WHICH one is hot (with respect to ground). |
#33
|
|||
|
|||
"bulldog" wrote in message om... Sander deWaal wrote in message . .. (bulldog) said: Well, as a former tube amp technician who has been shocked more times with more volts than I would care to count, I would say suck it up. Yeah it hurts but you'll most probobly live. You'd sell an amp with a safety risk to an unsuspecting customer? I wouldn't . First of all I didn't sell amps. I repaired them. The owner already knew his amplifier. He knew what to do and not to do. He also knew what he should touch and what not to touch. Old 2 prong tube amps had their safety issues, but the owners accepted that, and continued using them because they liked them. Remember, the type of equipment in question was built long before everybody started seuing everybody else. Seuing -is that Kprean ? Anyway, only pansy lberial commie socialist cry-babies would worry about a healthy dose of mains up the armpit, eh. Good strong christofascists like us can take it no problem. geoff |
#34
|
|||
|
|||
bulldog wrote:
First of all I didn't sell amps. I repaired them. The owner already knew his amplifier. He knew what to do and not to do. He also knew what he should touch and what not to touch. Old 2 prong tube amps had their safety issues, but the owners accepted that, and continued using them because they liked them. Remember, the type of equipment in question was built long before everybody started seuing everybody else. How did people survive all those years with so many radios having a hot chassis? They seemed safe enough to be sold by the thousands to everyone. What really scares me are resistor cords... Adam |
#35
|
|||
|
|||
"Adam Stouffer" wrote in message news:X2fod.4843$1B2.3482@trnddc02... bulldog wrote: First of all I didn't sell amps. I repaired them. The owner already knew his amplifier. He knew what to do and not to do. He also knew what he should touch and what not to touch. Old 2 prong tube amps had their safety issues, but the owners accepted that, and continued using them because they liked them. Remember, the type of equipment in question was built long before everybody started seuing everybody else. How did people survive all those years with so many radios having a hot chassis? They seemed safe enough to be sold by the thousands to everyone. What really scares me are resistor cords... When I was a kid (ca. 1965), my aunt had an Arvin radio, typical All American 5, hot chassis with a painted metal case. It was in the basement, over a nice concrete floor. Standing in my bare feet, I got a nasty jolt when I touched it. I mentioned it to my aunt, and she said "Oh, you need to turn the plug over". That's how we dealt with stuff like that back then. |
#36
|
|||
|
|||
Don't worry about converting a 3 watt amp to a grounded plug. It's not like the same punch as a vintage Ampeg SVT, Sunn or Acoustic will give you. When it comes to a shorted capacitor making the chassis hot with respect to AC ground, a 3 watt amp will indeed give you the same "punch" as a large, high powered one. This was what I thought was an obvious joke. Seriously though....I just realized that this thread was cross-posted to all these techie groups....no wonder everyone sounds like this. As I sit in my room surrounded by vintage Ampegs, Sunns, Marshalls, Fenders, Silvertones, Montgomery Ward, Vox and probably a few others I can't see right now....most of which are two prong cords....I don't worry about this sort of thing. Let me clarify. I check it out when I get a new/old amp. If it's fine then, I don't worry about it. If I happen to have one of these guys in the shop later on, my tech will sometimes change cords for me or tell me everything is fine. Simple. As Mike says earlier, if you're that worried about every little thing then you probably have no business playing in a bar anyway where you could get hit with a drumstick, a beer bottle, or really be out driving that late at night with all the other drunks on the road. Heck, I'd probably say playing a vintage amp is safer than going to an NBA game these days.... later, m |
#37
|
|||
|
|||
"chetatkinsdiet" wrote in message Fenders, Silvertones, Montgomery Ward, Vox and probably a few others I can't see right now....most of which are two prong cords.... Two-prong cords are not the same as 'hot chassis'. You can have a two-prong cord with the chassis still isolated by a mains transformer. geoff |
#38
|
|||
|
|||
It's not knowing your **** that makes one hated. It's being a total
dickhead, knowitall like you that has zero sense of humor that starts a conversation by trying to attack someone else for no reason. My advice to the guy to not worry so much about a vintage amp that he didn't even buy because he was worried about it shocking him wasn't really in the technical nature. So, **** you, **** off and always from now on, expect me to suggest someone else when looking for tubes. m |
#39
|
|||
|
|||
|
#40
|
|||
|
|||
There's been an awful lot of discussion here and few clear answers. I
use a 1965 Fender Vibrolux regulary. It's one of the best sounding amps around to me. When it had the original 2 prong cord I would get shocked on the lips at the mic if the polarity switch was in the wrong position. After having had enough of this I recapped the amp and installed a 3 prong plug and grounded the chassis. Since then no problem. Still, these vintage amps now sell for way to much. I couldn't afford it today. I paid about $400 for it now they sell for at least $1500+. Ther are a lot of new good sounding tube amps to check out that will have better safety built in. I don't know your budget but look at the Fender reissues, Carr, Bogner, VHT. Even a couple of the Peaveys arean't half bad. Use your ears and fingers a buy what works for you. ... I appreciate the time you've taken to respond and some areas are still under discussion. There are too many issues for me to summarize what I've learned but I intend to return and do that at the first of the year. I do think I will keep reading and buy a neon tester and outlet tester to start. My intent was to address the issue and hopefully make someone somewhere think. If I were to stretch for a simple, preliminary conclusion, it would be this: CAUTION: If you want a little amp just for playing at home, and especially if you have children, don't buy a vintage tube amp unless you know what you are doing. That may be stating the obvious but there it is, for now. It may be hard for some to believe, but it's easy to reach this purchase plan when you hear how simple those old point-to-point amps are, so easy to fix that hand-wiring, any repairman can do it, screw those circuit boards... Even portfolio managers are advising clients to diversify into vintage gear so it's a great investment, what are you waiting for, prices are going up as we speak.... Sometimes it's difficult to stand outside the box so I wonder if some of the "veterans" may be a little too cavalier in their approach - but honestly that is to be expected in any field. Maybe I AM being too cautious, maybe I AM thinking too hard on this, but I better figure that out first. My little girl is worth more to me than anything else in the world. I don't mind looking foolish if it is erring on the cautious side - the best advice so far. I sincerely appreciate the time and efforts of all you have responded. Dan |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
James Randi gets clarified on audio biz | High End Audio | |||
ALL amps are equal?? | Car Audio | |||
rec.audio.car FAQ (Part 1/5) | Car Audio | |||
Rockers Unite to Oust Bush | Audio Opinions | |||
Mechanic blames amplifier for alternator failing?? Help>>>>>>>>>>> | Car Audio |