jim wrote:
["Followup-To:" header set to comp.sys.hp.misc.]
On 2006-01-25, Larry Martell wrote:
I have a HP 85651B connected to an 8510C and I have 2 questions:

1) My 8510 says the system bus has address 1, and the pass-thru address
is 28. If my 85651
has an address of 19 then after I send "ADDRPASS 19;" on the HP-IB bus,
what address do I
use to send commands to the 85651? Do I use 1 or 28?

2) Where can I find the command set for the 85651B? I have been all
over Agilent's web site, but
there doesn't seem to be a manual for this instrument.

TIA,
-larry


A search of Agilent's site for "8510 +programming" gave this link:

8510C Programming Examples
http://www.home.agilent.com/cgi-bin/...cEditorial.jsp
?NAV_ID=-536893009.536879946.02&LANGUAGE_CODE=eng&CONTENT_K EY=
1000000975%3aepsg%3asud&ID=1000000975%3aepsg%3asud &COUNTRY_CODE=US

Pages 12 and 13 of the PDF document describes how the pass-thru
address works.

Jim.

found this at the Agilent's site:
Part Number: 08510-90281
8510C Network Analyzer Operating and Programming Manual
User Guide: 08510281.pdf 2001-05-01 2.47 MB
This manual includes the entire operating and programming
manual for the 8510C
web page address:
http://www.home.agilent.com/cgi-bin/...OUNTRY_CODE=US

copy add paste the whole string

wrote:
jim wrote:
["Followup-To:" header set to comp.sys.hp.misc.]
On 2006-01-25, Larry Martell wrote:
I have a HP 85651B connected to an 8510C and I have 2 questions:

1) My 8510 says the system bus has address 1, and the pass-thru address
is 28. If my 85651
has an address of 19 then after I send "ADDRPASS 19;" on the HP-IB bus,
what address do I
use to send commands to the 85651? Do I use 1 or 28?

2) Where can I find the command set for the 85651B? I have been all
over Agilent's web site, but
there doesn't seem to be a manual for this instrument.

TIA,
-larry


A search of Agilent's site for "8510 +programming" gave this link:

8510C Programming Examples
http://www.home.agilent.com/cgi-bin/...cEditorial.jsp
?NAV_ID=-536893009.536879946.02&LANGUAGE_CODE=eng&CONTENT_K EY=
1000000975%3aepsg%3asud&ID=1000000975%3aepsg%3asud &COUNTRY_CODE=US

Pages 12 and 13 of the PDF document describes how the pass-thru
address works.

Jim.

found this at the Agilent's site:
Part Number: 08510-90281
8510C Network Analyzer Operating and Programming Manual
User Guide: 08510281.pdf 2001-05-01 2.47 MB
This manual includes the entire operating and programming
manual for the 8510C
web page address:
http://www.home.agilent.com/cgi-bin/...OUNTRY_CODE=US

copy add paste the whole string

Thanks for the reply, but I already have an 8510 manual. What I was
looking for was the 85651 manual. Agilent told me to see the 8360
manual - they have the same command set.

-larry