[Phil Allison[_4_]]

Paul wrote:

Phil Allison wrote:


Similar S-K filter stages are connected around the two LM3886 power amps - after scaling each output (eg R7 & R8) to give unity gain. This doubles the roll off slopes to 24db/octave.



If the roll-off slope for the TR8 is -24dB/octave, and there is
-6dB/octave per element, then it looks like this can be considered a 4th
order filter, right? Where did you get the -24dB/octave?



** Look at the TR8 schem carefully - the LM3886s have additional feedback paths around them aside from the usual gain setting networks.

U1 has a filter path with the same component values used for HF crossover U3A while U4 has one the same as LF crossover U3B.

As the filters are in series, the ultimate roll of slope is double that of each - or 24dB / oct.


..... Phil