[Jon Yaeger]

I've got a Hickok 539B and a TV3-B/U tube tester.

Does anyone know the settings for the following:

6C45P
6H30P


Thanks in advance,

Jon

[Peter Wieck]

Jon Yaeger wrote:
I've got a Hickok 539B and a TV3-B/U tube tester.

Does anyone know the settings for the following:

6C45P
6H30P


Thanks in advance,

Jon

Jon:

The 6H30P will be the same settings as the 6H6.
The 6C45B will be the same as the 6C5.

Hope this helps.

Peter Wieck
Wyncote, PA

[Jon Yaeger]

in article , Peter
Wieck at wrote on 12/1/06 6:34 AM:


Jon Yaeger wrote:
I've got a Hickok 539B and a TV3-B/U tube tester.

Does anyone know the settings for the following:

6C45P
6H30P


Thanks in advance,

Jon

Jon:

The 6H30P will be the same settings as the 6H6.
The 6C45B will be the same as the 6C5.

Hope this helps.

Peter Wieck
Wyncote, PA



It does. Thanks!

[Jon Yaeger]

in article , Peter
Wieck at wrote on 12/1/06 6:34 AM:


Jon Yaeger wrote:
I've got a Hickok 539B and a TV3-B/U tube tester.

Does anyone know the settings for the following:

6C45P
6H30P


Thanks in advance,

Jon

Jon:

The 6H30P will be the same settings as the 6H6.
The 6C45B will be the same as the 6C5.

Hope this helps.

Peter Wieck
Wyncote, PA



Peter,

No good deed goes unpunished, right?

When you say the setting are the "same", did you neglect to mention that the
pinout is not?

Jon

[Peter Wieck]

Jon Yaeger wrote:

See my e-mail. My substition book shows a bunch subs for each tube, but
as it is more recent than my Hickok supplement, which does not list
them at all, I could not cross-check.

I sent you the full list via e-mail.

Peter Wieck
Wyncote, PA

[Jon Yaeger]

in article , Peter
Wieck at wrote on 12/2/06 3:50 PM:


Jon Yaeger wrote:

See my e-mail. My substition book shows a bunch subs for each tube, but
as it is more recent than my Hickok supplement, which does not list
them at all, I could not cross-check.

I sent you the full list via e-mail.

Peter Wieck
Wyncote, PA



Thanks for the add'l info, Peter.

I'm sorry if I jumped to conclusions . . . But I put the 6C45 tube in an
Eico tester and it buzzed right away like it was shorted.

I didn't try it in my Hickok because it didn't have settings listed for the
6C5, etc.

Much obliged,

Jon