Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Building LS3/5A's
I cannot afford to buy a pair of real, or even "knockoff" LS3/5A's, so I've
decided to utilize the vast amounts of information and documentation on the internet regarding how to build your own pair (mainly from www.ls35a.com). I am an amateur guitarbuilder so construction should be no problem. My question, I have a pair of 8 ohm KEF B110's (sp1003) and a matching pair of KEF 8 ohm T27's (sp1032) pulled from a pair of 80's Fried Model B monitors. I cannot find any useful info about this specific model and I need to decide on what type of crossover to use. As I understand there was a different crossover used after 1987 when manufacturing switched to KEF. Should I use one of the newer crossovers, or the older pre-87 crossovers for these speakers or does it even matter? btw, I cannot afford the cicable external crossover (at £600)....all help is GREATLY appreciated. Thankyou! -- Jonny Durango http://www.soundclick.com/ratcitymusic.htm "Of course the people don't want war. But after all, it's the leaders of the country who determine the policy, and it's always a simple matter to drag the people along whether it's a democracy, a fascist dictatorship, or a parliament, or a communist dictatorship. Voice or no voice, the people can always be brought to the bidding of the leaders. That is easy. All you have to do is tell them they are being attacked, and denounce the pacifists for lack of patriotism, and exposing the country to greater danger." -- Herman Goering, Hitler's Reich-Marshall, at the Nuremberg trials after WWII. |
#2
|
|||
|
|||
Building LS3/5A's
"Jonny Durango" wrote in message news:ekFdc.109772$K91.311349@attbi_s02... I cannot afford to buy a pair of real, or even "knockoff" LS3/5A's, so I've decided to utilize the vast amounts of information and documentation on the internet regarding how to build your own pair (mainly from www.ls35a.com). I am an amateur guitarbuilder so construction should be no problem. My question, I have a pair of 8 ohm KEF B110's (sp1003) and a matching pair of KEF 8 ohm T27's (sp1032) pulled from a pair of 80's Fried Model B monitors. I cannot find any useful info about this specific model and I need to decide on what type of crossover to use. As I understand there was a different crossover used after 1987 when manufacturing switched to KEF. Should I use one of the newer crossovers, or the older pre-87 crossovers for these speakers or does it even matter? btw, I cannot afford the cicable external crossover (at £600)....all help is GREATLY appreciated. Thankyou! Definitely the older crossovers; they're designed for the B110 you're using, so at least you'll be in the ballpark. The later crossovers were designed for a later-model B110 with a different surround. Only trouble is, you'll need to create that tapped inductor somehow, in order to adjust the levels properly. Peace, Paul |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
building my own snake | Pro Audio | |||
Building Your Own Cables | Pro Audio | |||
Ressources on building your own amp | General | |||
Cost of building a studio? | Pro Audio | |||
Box building | Car Audio |