Reply
 
Thread Tools Display Modes
  #1   Report Post  
lucian
 
Posts: n/a
Default Professional audio services offered in the Ottawa area...

Expert in tube audio equipment offers services in the Ottawa area:
- tube matching for absolutely all types, directly or indirectly heated
types. Absolute matching done on Tektronix curve tracer
- re-biasing for all amplifiers, vintage or modern, including distortion
measurements and impeccable balancing
- re-balancing driver and input stages, for the absolutely lowest level
of harmonic and intermodulation distortion possible
- microphony/noise measurement and adjustment for power amplifiers and
phono/line preamplifiers
- permanent supply of tubes of excellent quality available, both vintage
and modern fabrication
- upgrades for all types of amplifiers, including re-tubing, passive
component upgrade and power supply conversion
- re-engineering of amplifiers for using modern tubes rather than rare
vintage types: all without any loss of performance
- custom design for tube amplifiers, single ended or push-pull,
incredible designs available
Services are performed by professional engineer, primarily an analog
designer, with more than 25 years in tube and semiconductor audio
engineering.
Absolute top of scale audio analysis equipment is available, including
ultra-specialized vacuum tube curve tracers.
Tube equipment need periodic alignment and adjustment for optimum
performance, so competent service is a must for the quality conscious
audiophile. For the very discerning ones, custom designs can be
provided, new, ultra-high performance designs and not just re-hashed
versions of fifty year old classics...
Whether interested in adjusting your equipment back to top form,
modifications/upgrades, unique designs or simply matching your precious
vintage tubes, please call Lucian at 613-726-1779, daily after 6PM.

Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Crazy market saturation! CatalystX Car Audio 48 February 12th 04 10:18 AM
Car Audio installers on the Baltimore area JA Chong Car Audio 1 November 12th 03 01:41 PM
car audio store in GTA/Toronto/Markham area ??? 220 Car Audio 3 October 8th 03 07:32 PM
car audio distributor Los angeles area Dave Car Audio 2 October 3rd 03 01:29 AM
CDA9813 - need to set area before audio comes out? Bentley Bear Car Audio 0 September 7th 03 06:50 PM


All times are GMT +1. The time now is 06:17 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"