Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Tascam DM-3200 or O1V96 for ProTools
Any one using either of these as a front end, even as a controller for a
ProTools rig? And what are your thoughts on the sound, ease of use, DAW integration, etc. Thanks! Ron |
#2
|
|||
|
|||
Guitrzman wrote: Any one using either of these as a front end, even as a controller for a ProTools rig? And what are your thoughts on the sound, ease of use, DAW integration, etc. Thanks! Ron You might want to visit www.tascamforums.com. Granted you'll probably get a slant towards the tascam stuff but the people there are fairly informative and upfront. Mike http://www.mmeproductions.com |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tascam DM-3200 or O1V96 for Protools | Audio Opinions | |||
How do I get MMC/MTC/SMPTE between Sonar, Tascam 1884, and an ADAT? | Pro Audio | |||
What happen to the TASCAM on-line forums??? | Pro Audio | |||
FS: Studio Liquidation | Marketplace | |||
audio stutter w/laptop and Tascam US428 | Pro Audio |