Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tech
|
|||
|
|||
amplifier circuit for altec lansing speakers
Hi all,
I have 2 satellite speakers, each of 4 ohm, 6 watts, and subwoofer, 20 watts. do you have a diy ampli circuit that i can make? Thanks. |
#2
Posted to rec.audio.tech
|
|||
|
|||
amplifier circuit for altec lansing speakers
"Drako" wrote ...
I have 2 satellite speakers, each of 4 ohm, 6 watts, and subwoofer, 20 watts. do you have a diy ampli circuit that i can make? There are many online sources for kits like this... http://www.electronickits.com/kit/co.../ampl/k143.htm for the satellites http://www.electronickits.com/kit/co.../ampl/k143.htm for the subwoofer You will also need a crossover circuit, many of those out there, too. Google is your friend. |
#3
Posted to rec.audio.tech
|
|||
|
|||
amplifier circuit for altec lansing speakers
Drako wrote:
Hi all, I have 2 satellite speakers, each of 4 ohm, 6 watts, and subwoofer, 20 watts. do you have a diy ampli circuit that i can make? Thanks. www.diyaudio.com search for "gainclone" amplifiers..(chip-amps) Lots of info,circuits,helpful people,etc. |
#4
Posted to rec.audio.tech
|
|||
|
|||
amplifier circuit for altec lansing speakers
"PhattyMo" wrote ...
Drako wrote: Hi all, I have 2 satellite speakers, each of 4 ohm, 6 watts, and subwoofer, 20 watts. do you have a diy ampli circuit that i can make? Thanks. www.diyaudio.com search for "gainclone" amplifiers..(chip-amps) Lots of info,circuits,helpful people,etc. Those are very nice, I have made some myself. BUT they are rather substantially overpowered for the OP's speakers. They could vaporize the speakers before the protection circuit even knew what happened. |
#5
Posted to rec.audio.tech
|
|||
|
|||
amplifier circuit for altec lansing speakers
Many thanks to all.
Spent a night fixing and tinkering and I found that the PT2256 digital volume control is busted. I shorted the input pins and it worked. Only that no output in one of the satellites. All I have to do is make a stereo to mono circuit or maybe setup my software to output mono. Right? |
#6
Posted to rec.audio.tech
|
|||
|
|||
amplifier circuit for altec lansing speakers
"Drako" wrote ...
All I have to do is make a stereo to mono circuit or maybe setup my software to output mono. Right? Maybe. Your question cannot be competently answered with so little information. |
#7
Posted to rec.audio.tech
|
|||
|
|||
amplifier circuit for altec lansing speakers
Richard Crowley wrote:
"PhattyMo" wrote ... Drako wrote: Hi all, I have 2 satellite speakers, each of 4 ohm, 6 watts, and subwoofer, 20 watts. do you have a diy ampli circuit that i can make? Thanks. www.diyaudio.com search for "gainclone" amplifiers..(chip-amps) Lots of info,circuits,helpful people,etc. Those are very nice, I have made some myself. BUT they are rather substantially overpowered for the OP's speakers. They could vaporize the speakers before the protection circuit even knew what happened. The "usual" varieties probably would be too much power,if you cranked the volume. There are other smaller 'flavors' using the LM1875,and similar chips. |
#8
Posted to rec.audio.tech
|
|||
|
|||
amplifier circuit for altec lansing speakers
The "usual" varieties probably would be too much power,if you cranked the volume. There are other smaller 'flavors' using the LM1875,and similar chips. From Google: stereo to mono adapter, too dangerous. little info about stereo to mono conversion What can I do for now is play music using mplayer -channels 1. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
LWE-1 Acoustron stereo speakers - suggestions for amplifier requested | Audio Opinions | |||
LWE-1 Acoustron stereo speakers - suggestions for amplifier requested | Tech | |||
Ferstler Moves On | Audio Opinions | |||
rec.audio.car FAQ (Part 2/5) | Car Audio | |||
My equipment review of the Bose 901 | Audio Opinions |