Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Neve B110 Question.
Does the B110 present DC current to the opt like
a 1272? I've found one post that Identifies a 1166a as the output transformer but I don't know if it is gapped like the LO1166. Thanks in advance for any information, Steve |
#2
|
|||
|
|||
Neve B110 Question.
sryan wrote in message ...
Does the B110 present DC current to the opt like a 1272? I've found one post that Identifies a 1166a as the output transformer but I don't know if it is gapped like the LO1166. Thanks in advance for any information, Steve Hi Steve Fear not, the B183/AV used in the later (as in late 1960's!) modules was based on two individual circuit boards from the previous (mid 60's) era. The B183 pre amp was derived from the B112 and the B183 output section was developed from your B110. If it's a 1166 "anything", you can use it! Geoff Tanner Phoenix Audio International LLC Aurora Audio International www.auroraaudio.net |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Serious question for "Michael McKelvy" | Audio Opinions | |||
RCA out and Speaker Question in 2004 Ranger Edge Question | Car Audio | |||
FS: 8 channel rack for Neve 1073's | Pro Audio | |||
FS: Neve V Series Near Field Spk. Stand | Pro Audio | |||
FS NEVE 33114/b mic pre/eq | Pro Audio |