Home |
Search |
Today's Posts |
#20
Posted to rec.audio.pro
|
|||
|
|||
Pultec EQP clone problem
gareth magennis is a total IDIOT wrote:
================================== ** You said *nothing of the sort* - you pathetic bull**** artist. Got a broom handy - know how to use it? Oh well, I tried. ** ROTFL !!!! The only thing this tedious prick " tried " was to bull**** his way out of admitting his massive incompetency. OK, briefly, I talked at length to the customer today. His experience of this "motorboating" was an oscillation around 90 Hz. ** Jesus ****ing Christ - STOP using the wrong names for things. !! Does a motorboat sound like a 90 Hz tone to you ??? I had an email converation with the company today. They say they had problems with the first batch of units that would oscillate around 90 Hz when connected to a remote patchbay. ** Absolute ******** !!! I was incorrect in assuming this mod was to guard against HF oscillations. ** That may be the one thing you got correct. 2. The thing with the added capacitors and resistors is to properly load the output stages, which would solve a buzz you might hear if you run long output cables. ** So it is now a "buzz" - not a motorboat sound. Sounds *hell of a lot* like " parasitic oscillations " which can be discontinuous. If so, despite being in the supersonic range may generate an audible buzz at some rate. FFS leave audio alone, your broom awaits. ....... Phil |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Dachman Audio U87 Clone Kit | Pro Audio | |||
Good amps to clone | Vacuum Tubes | |||
WTB Waves Q-Clone License | Pro Audio | |||
The clone marching on | Audio Opinions | |||
N72 1272 clone | Pro Audio |