Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tech
|
|||
|
|||
Some measurements
I just ran some "Samples from USB Turntables" through my old tool.
http://www.knowzy.com/Computers/Audi...sHydrogenAudio Results he http://www.wareing77.plus.com/For_Knowzy/ Perhaps Arny or someone else could pass this information on to Knowzy as I am not joining 'no forums'.. Thanks. |
#2
Posted to rec.audio.tech
|
|||
|
|||
Some measurements
goofball_star_dot_etal wrote:
I just ran some "Samples from USB Turntables" through my old tool. http://www.knowzy.com/Computers/Audi...sHydrogenAudio Results he http://www.wareing77.plus.com/For_Knowzy/ Perhaps Arny or someone else could pass this information on to Knowzy as I am not joining 'no forums'.. Very interesting, and an interesting tool. Thanks. Thank you! Kind regards Peter Larsen |
#3
Posted to rec.audio.tech
|
|||
|
|||
Some measurements
On 14/03/2011 04:05, Peter Larsen wrote:
goofball_star_dot_etal wrote: I just ran some "Samples from USB Turntables" through my old tool. http://www.knowzy.com/Computers/Audi...sHydrogenAudio Results he http://www.wareing77.plus.com/For_Knowzy/ Perhaps Arny or someone else could pass this information on to Knowzy as I am not joining 'no forums'.. Very interesting, and an interesting tool. Thanks. Thank you! Kind regards Peter Larsen I am adding/have added some more files. For the first time I can clearly distinguish imperfections in the platter-pulley/test-disk from the slightly lower rotational speed of those in the belt. This can be seen in the polat plots in /Grace, /Crosley where the magnitudes of both effects are comparable. This is done by tweaking the "platter speed" control which changes the rate at which the plot wraps around. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Hum Measurements | Vacuum Tubes | |||
Measurements of ampllifiers | Vacuum Tubes | |||
Measurements of ampllifiers | Audio Opinions | |||
Low Level 45 Measurements | Vacuum Tubes | |||
mixer measurements | Pro Audio |