Home |
Search |
Today's Posts |
#1
|
|||
|
|||
speaker design
I have a couple or three of questions on speaker design:
I have a pair of well gigged speakers bought second hand and the cabinets are very tatty. These existing cabs are of chipboard. Would it be a good idea to use MDF instead to make new cabs? I have heard of cabs being carpeted, does this mean that the interior is lined with carpet? if so what is the best to use? The 15" base speaker seems to be compartmentalised, sparated from the rest, tthere are 2x12" and 2xsmall rectangular horn like speakers, I'm not sure yet if these are separated. Is it better to have them separated from each other to avoid interference? TIA regards |
#2
|
|||
|
|||
speaker design
mobile speakers need to be made of plywood for durability and weight.
Chipboard particleboard MDF will all fall apart if knocked, carpet is generaly used on the outside of PA speakers for knock protection. separate compartments for the woofer, the mid and tweeter prob can live together ok. line the enclosures (cabinets with bitumin or similar damping material if not using them mobile, otherwise use 2" audio foam.and stuff them with fibreglass as well, this lowers the speed of sound in the cabinets and makes them seem to have more volume. "iz0nlee" wrote in message ... I have a couple or three of questions on speaker design: I have a pair of well gigged speakers bought second hand and the cabinets are very tatty. These existing cabs are of chipboard. Would it be a good idea to use MDF instead to make new cabs? I have heard of cabs being carpeted, does this mean that the interior is lined with carpet? if so what is the best to use? The 15" base speaker seems to be compartmentalised, sparated from the rest, tthere are 2x12" and 2xsmall rectangular horn like speakers, I'm not sure yet if these are separated. Is it better to have them separated from each other to avoid interference? TIA regards |
#3
|
|||
|
|||
speaker design
mobile speakers need to be made of plywood for durability and weight.
Chipboard particleboard MDF will all fall apart if knocked, carpet is generaly used on the outside of PA speakers for knock protection. separate compartments for the woofer, the mid and tweeter prob can live together ok. line the enclosures (cabinets with bitumin or similar damping material if not using them mobile, otherwise use 2" audio foam.and stuff them with fibreglass as well, this lowers the speed of sound in the cabinets and makes them seem to have more volume. "iz0nlee" wrote in message ... I have a couple or three of questions on speaker design: I have a pair of well gigged speakers bought second hand and the cabinets are very tatty. These existing cabs are of chipboard. Would it be a good idea to use MDF instead to make new cabs? I have heard of cabs being carpeted, does this mean that the interior is lined with carpet? if so what is the best to use? The 15" base speaker seems to be compartmentalised, sparated from the rest, tthere are 2x12" and 2xsmall rectangular horn like speakers, I'm not sure yet if these are separated. Is it better to have them separated from each other to avoid interference? TIA regards |
#4
|
|||
|
|||
speaker design
I bond roof felt with instant nails in my speakers, all the internal
surfaces. "iz0nlee" wrote in message ... I have a couple or three of questions on speaker design: I have a pair of well gigged speakers bought second hand and the cabinets are very tatty. These existing cabs are of chipboard. Would it be a good idea to use MDF instead to make new cabs? I have heard of cabs being carpeted, does this mean that the interior is lined with carpet? if so what is the best to use? The 15" base speaker seems to be compartmentalised, sparated from the rest, tthere are 2x12" and 2xsmall rectangular horn like speakers, I'm not sure yet if these are separated. Is it better to have them separated from each other to avoid interference? TIA regards |
#5
|
|||
|
|||
speaker design
I bond roof felt with instant nails in my speakers, all the internal
surfaces. "iz0nlee" wrote in message ... I have a couple or three of questions on speaker design: I have a pair of well gigged speakers bought second hand and the cabinets are very tatty. These existing cabs are of chipboard. Would it be a good idea to use MDF instead to make new cabs? I have heard of cabs being carpeted, does this mean that the interior is lined with carpet? if so what is the best to use? The 15" base speaker seems to be compartmentalised, sparated from the rest, tthere are 2x12" and 2xsmall rectangular horn like speakers, I'm not sure yet if these are separated. Is it better to have them separated from each other to avoid interference? TIA regards |
#6
|
|||
|
|||
speaker design
I have a couple or three of questions on speaker design: I have a pair of well gigged speakers bought second hand and the cabinets are very tatty. These existing cabs are of chipboard. Would it be a good idea to use MDF instead to make new cabs? I have heard of cabs being carpeted, does this mean that the interior is lined with carpet? if so what is the best to use? The 15" base speaker seems to be compartmentalised, sparated from the rest, tthere are 2x12" and 2xsmall rectangular horn like speakers, I'm not sure yet if these are separated. Is it better to have them separated from each other to avoid interference? TIA regards MDF works well for cabinets. So does 20 ply birch plywood, but it is expensive. Carpet covered means Ozite on the exterior. the 12's and the horns can be in the same compartment. the horns are not affected by pressurization from the 12's. Richard H. Kuschel "I canna change the law of physics."-----Scotty |
#7
|
|||
|
|||
speaker design
I have a couple or three of questions on speaker design: I have a pair of well gigged speakers bought second hand and the cabinets are very tatty. These existing cabs are of chipboard. Would it be a good idea to use MDF instead to make new cabs? I have heard of cabs being carpeted, does this mean that the interior is lined with carpet? if so what is the best to use? The 15" base speaker seems to be compartmentalised, sparated from the rest, tthere are 2x12" and 2xsmall rectangular horn like speakers, I'm not sure yet if these are separated. Is it better to have them separated from each other to avoid interference? TIA regards MDF works well for cabinets. So does 20 ply birch plywood, but it is expensive. Carpet covered means Ozite on the exterior. the 12's and the horns can be in the same compartment. the horns are not affected by pressurization from the 12's. Richard H. Kuschel "I canna change the law of physics."-----Scotty |
#8
|
|||
|
|||
speaker design
"Richard Kuschel" wrote in message ... I have a couple or three of questions on speaker design: I have a pair of well gigged speakers bought second hand and the cabinets are very tatty. These existing cabs are of chipboard. Would it be a good idea to use MDF instead to make new cabs? I have heard of cabs being carpeted, does this mean that the interior is lined with carpet? if so what is the best to use? The 15" base speaker seems to be compartmentalised, sparated from the rest, tthere are 2x12" and 2xsmall rectangular horn like speakers, I'm not sure yet if these are separated. Is it better to have them separated from each other to avoid interference? TIA regards MDF works well for cabinets. So does 20 ply birch plywood, but it is expensive. Carpet covered means Ozite on the exterior. the 12's and the horns can be in the same compartment. the horns are not affected by pressurization from the 12's. Richard H. Kuschel "I canna change the law of physics."-----Scotty woundnt MDF be a bit fragile for mobile use? and heavy too. |
#9
|
|||
|
|||
speaker design
"Richard Kuschel" wrote in message ... I have a couple or three of questions on speaker design: I have a pair of well gigged speakers bought second hand and the cabinets are very tatty. These existing cabs are of chipboard. Would it be a good idea to use MDF instead to make new cabs? I have heard of cabs being carpeted, does this mean that the interior is lined with carpet? if so what is the best to use? The 15" base speaker seems to be compartmentalised, sparated from the rest, tthere are 2x12" and 2xsmall rectangular horn like speakers, I'm not sure yet if these are separated. Is it better to have them separated from each other to avoid interference? TIA regards MDF works well for cabinets. So does 20 ply birch plywood, but it is expensive. Carpet covered means Ozite on the exterior. the 12's and the horns can be in the same compartment. the horns are not affected by pressurization from the 12's. Richard H. Kuschel "I canna change the law of physics."-----Scotty woundnt MDF be a bit fragile for mobile use? and heavy too. |
#10
|
|||
|
|||
speaker design
"malcolm" wrote in message
news:U7yob.70566$HS4.625525@attbi_s01 woundn't MDF be a bit fragile for mobile use? MDF is widely used in mobile applications, but if you want a solid upgrade see Richard's comments about 20 ply birch plywood. and heavy too. See Richard's comments about 20 ply birch plywood. |
#11
|
|||
|
|||
speaker design
"malcolm" wrote in message
news:U7yob.70566$HS4.625525@attbi_s01 woundn't MDF be a bit fragile for mobile use? MDF is widely used in mobile applications, but if you want a solid upgrade see Richard's comments about 20 ply birch plywood. and heavy too. See Richard's comments about 20 ply birch plywood. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
It's OVER! Design my Speaker system is Done. | High End Audio | |||
rec.audio.car FAQ (Part 3/5) | Car Audio | |||
quested "braced" speaker design question | Pro Audio | |||
My equipment review of the Bose 901 | Audio Opinions | |||
Comments about Blind Testing | High End Audio |