Home |
Search |
Today's Posts |
#1
Posted to sci.electronics.repair,rec.audio.tech
|
|||
|
|||
Source for filter caps
Hello all,
I looking for a vender for 10000uf, 100V(or better) caps for replacements in my TFM-35. I want to stick with the original configuration (radial) but could adapt axials as required. Don't need black gates or whatever; but, I don't want to put in bottom shelf pieces, either. Any suggestions? Thanks, Ernst |
#2
Posted to sci.electronics.repair,rec.audio.tech
|
|||
|
|||
Source for filter caps
wrote: Hello all, I looking for a vender for 10000uf, 100V(or better) caps for replacements in my TFM-35. I want to stick with the original configuration (radial) but could adapt axials as required. Don't need black gates or whatever; but, I don't want to put in bottom shelf pieces, either. Any suggestions? Thanks, Ernst Digikey carrys a lot of this type capacitor. Check out the on-line catalogue page at this link: http://dkc3.digikey.com/PDF/T063/1192.pdf Expect to pay from 10 - 15 USD for these. - mkaras |
#3
Posted to sci.electronics.repair,rec.audio.tech
|
|||
|
|||
Source for filter caps
wrote in message
ups.com... Hello all, I looking for a vender for 10000uf, 100V(or better) caps for replacements in my TFM-35. I want to stick with the original configuration (radial) but could adapt axials as required. Don't need black gates or whatever; but, I don't want to put in bottom shelf pieces, either. Any suggestions? Thanks, Ernst Ernst - IF you are based in North America, the CDE web site (just recently updated) -- offers a comprehensive selection of capacitors for restoration work or new designs http://www.cde.com/new/ Here is the CDE aluminum electrolytic radial selection, by model numbers: http://www.cde.com/new/catalog/alum/#radial I would also suggest downloading and reading the engineering technical papers written by: Sam Parler and Lairs Macomber They now have a JAVA based Life and Temperature calculator -- useful for correct replacements or upgrades. CDE has an extensive distributor and dealer network (e.g. Mouser, Newark, Allied, DigiKey) throughout the USA and Canada. g. beat |
#4
Posted to sci.electronics.repair,rec.audio.tech
|
|||
|
|||
Source for filter caps
|
#5
Posted to sci.electronics.repair,rec.audio.tech
|
|||
|
|||
Source for filter caps
Eeyore wrote:
wrote: Hello all, I looking for a vender for 10000uf, 100V(or better) caps for replacements in my TFM-35. I want to stick with the original configuration (radial) but could adapt axials as required. Don't need black gates or whatever; but, I don't want to put in bottom shelf pieces, either. Any suggestions? uk.farnell.com Graham He's in the US, donkey. Go troll another group. -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
enhancing early reflections? | Pro Audio | |||
Creating Dimension In Mixing- PDF available on Request (112 pages0 | Pro Audio | |||
bypassing electrolytic caps | Pro Audio | |||
FA: 2 RelCap 5uF/200VDC 10% caps and 4.7nF polyester bypass caps | Marketplace | |||
Speaker Repair Glue - Name and Source bulk buys | General |