Home |
Search |
Today's Posts |
#1
|
|||
|
|||
One channel sound
I have creative 5.1 sound, a sound blaster audigy xgamer 1.0 and
running XP pro on a 2k+ mhz system. All 5 channels were working perfectly until yest. when i sat down to realize i had no sound. I tweaked all the settings i could find and finally found in the sound control panel i have to go to the audio tab, select volume under the default device for sound playback and if the volume is at anything but the 2 highest notches on the slider bar i can hear no sound. My keyboard audio controls do not alter the volume up or down, but will mute it. The hardware control for my speaker system adjusts it, but the same as the slider bar, if it isn't maxed, you wont hear it. It is also only playing out of the speaker plugged into the front left port. I am fairly competent with computer systems (i work in IT for tx tech univ.) and I am completely lost as to what to do. If anyone has any ideas, suggestions or donations, they would all be greatly appreciated Thanks for your time |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Is front center channel sufficient? | Audio Opinions | |||
rec.audio.car FAQ (Part 2/5) | Car Audio | |||
Subwoofer Output Question | Tech | |||
Newbie Subwoofer questions | General | |||
Surround Sound for Stereo Lovers | High End Audio |