Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

Happy New Year.

So I just dumpster-dived a pair of mid-'80s (guessing) RS Sierra tower speakers from a neighbor.

This is a premature question because I haven't hooked them up yet, but they have 12" rear-firing passive radiators with totally shot foam surrounds.

Assuming it's worth fixing them - if only to trade someone for something else - is it likely to make any serious difference what round 12" cone-shaped thing I put back there? Serious = commensurate with the quality of these speakers.

My guess is that these are hyped speakers, because I know Rogersound Labs and other stereo stores used to compare speakers to JBL L100s in those days. But the tweeter, midrange, and woofer are outwardly in good shape. The cabinets are in reasonable shape, but because I've been doing a lot of woodworking* recently I can easily replace some of the walnut veneer if it's necessary.

TIA

* By the way, if anyone knows anyone in the market for custom studio furniture, especially a unique composer's desk, let me know and and I'll send you some pictures. This has become a serious side business - I just shipped a desk to Paris, another to Florida - and I'm truly enjoying it.
  #2   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

https://www.amazon.com/ESS-Speaker-P.../dp/B009DNMZ6M

For example
  #3   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

I'm thinking $3 foam surrounds from ebay would probably do the job, right? No need for the Italian silk ones with solid gold mounting hardware?
  #4   Report Post  
Posted to rec.audio.pro
Mike Rivers[_2_] Mike Rivers[_2_] is offline
external usenet poster
 
Posts: 2,190
Default 12" passive radiator replacement?

On 1/4/2020 9:21 PM, nickbatz wrote:
Assuming it's worth fixing them - if only to trade someone for something else - is it likely to make any serious difference what round 12" cone-shaped thing I put back there? Serious = commensurate with the quality of these speakers.


A passive radiator is just a driver without the motor. When you get an
"edge kit" you leave the original cone in place, so you don't have to
worry about matching the cone mass and stiffness, they thing that should
match the original is the stiffness of the suspension.

I have some Advent speakers that had foam rot. I'd never worked on a
speaker before so I was hesitant to operate on them, but figured that
for ten bucks or so I'd give it a try. It worked out just fine. The
hardest part is to get all the the old glue off the frame where the
suspension is attached.

I got my kit from Simply Speakers. Their web site gave me enough
confidence that I could do the job, and they were helpful with some
pre-purchase questions. You might take a look and see if they already
know what you need and can supply it.

https://www.simplyspeakers.com/ of course.



--
For a good time, call http://mikeriversaudio.wordpress.com
  #5   Report Post  
Posted to rec.audio.pro
Scott Dorsey Scott Dorsey is offline
external usenet poster
 
Posts: 16,853
Default 12" passive radiator replacement?

In article , Mike Rivers wrote:
On 1/4/2020 9:21 PM, nickbatz wrote:
Assuming it's worth fixing them - if only to trade someone for something else - is it likely to make any serious difference what round 12" cone-shaped thing I put back there? Serious = commensurate with the quality of these speakers.


A passive radiator is just a driver without the motor. When you get an
"edge kit" you leave the original cone in place, so you don't have to
worry about matching the cone mass and stiffness, they thing that should
match the original is the stiffness of the suspension.


A lot of passive radiators, though, have the stiffness entirely the result
of the surround; there is no spider, no other suspension and so consequently
the surround has to be constructed differently and the surround needs to
be selected properly for the driver.

I have some Advent speakers that had foam rot. I'd never worked on a
speaker before so I was hesitant to operate on them, but figured that
for ten bucks or so I'd give it a try. It worked out just fine. The
hardest part is to get all the the old glue off the frame where the
suspension is attached.


In the case of speakers, the stiffness is mostly the result of the spider,
so you can swap out the surround with impunity without affecting the
driver Fs appreciably.

I got my kit from Simply Speakers. Their web site gave me enough
confidence that I could do the job, and they were helpful with some
pre-purchase questions. You might take a look and see if they already
know what you need and can supply it.

https://www.simplyspeakers.com/ of course.


Passive radiators aren't expensive. The stiffness on them varies. If it
were me, I'd get one of every kind that Madisound sells, try them in turn,
and see which one gives most accurate low end. Then I'd buy a second one
of that model for the other speaker.

Somebody who actually knows those speakers can likely do better, and it's
possible some place like Simply Speakers or the Speaker Factory in
Gathersburg, MD might know them.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."


  #6   Report Post  
Posted to rec.audio.pro
Don Pearce[_3_] Don Pearce[_3_] is offline
external usenet poster
 
Posts: 2,417
Default 12" passive radiator replacement?

On Sat, 4 Jan 2020 18:21:29 -0800 (PST), nickbatz
wrote:

Happy New Year.

So I just dumpster-dived a pair of mid-'80s (guessing) RS Sierra tower speakers from a neighbor.

This is a premature question because I haven't hooked them up yet, but they have 12" rear-firing passive radiators with totally shot foam surrounds.

Assuming it's worth fixing them - if only to trade someone for something else - is it likely to make any serious difference what round 12" cone-shaped thing I put back there? Serious = commensurate with the quality of these speakers.

My guess is that these are hyped speakers, because I know Rogersound Labs and other stereo stores used to compare speakers to JBL L100s in those days. But the tweeter, midrange, and woofer are outwardly in good shape. The cabinets are in reasonable shape, but because I've been doing a lot of woodworking* recently I can easily replace some of the walnut veneer if it's necessary.

TIA

* By the way, if anyone knows anyone in the market for custom studio furniture, especially a unique composer's desk, let me know and and I'll send you some pictures. This has become a serious side business - I just shipped a desk to Paris, another to Florida - and I'm truly enjoying it.


If you have the TS parameters for the main driver, you can probably
design a port that will allow you to do away with the stupid passive
radiator. They are no more than a spring and a mass, just the same as
air in a port tube, but suffer added non-linearity due to the
suspension. Any subwoofer design software will let you do this.

d
  #7   Report Post  
Posted to rec.audio.pro
Les Cargill[_4_] Les Cargill[_4_] is offline
external usenet poster
 
Posts: 1,383
Default 12" passive radiator replacement?

Don Pearce wrote:
On Sat, 4 Jan 2020 18:21:29 -0800 (PST), nickbatz
wrote:

Happy New Year.

So I just dumpster-dived a pair of mid-'80s (guessing) RS Sierra tower speakers from a neighbor.

This is a premature question because I haven't hooked them up yet, but they have 12" rear-firing passive radiators with totally shot foam surrounds.

Assuming it's worth fixing them - if only to trade someone for something else - is it likely to make any serious difference what round 12" cone-shaped thing I put back there? Serious = commensurate with the quality of these speakers.

My guess is that these are hyped speakers, because I know Rogersound Labs and other stereo stores used to compare speakers to JBL L100s in those days. But the tweeter, midrange, and woofer are outwardly in good shape. The cabinets are in reasonable shape, but because I've been doing a lot of woodworking* recently I can easily replace some of the walnut veneer if it's necessary.

TIA

* By the way, if anyone knows anyone in the market for custom studio furniture, especially a unique composer's desk, let me know and and I'll send you some pictures. This has become a serious side business - I just shipped a desk to Paris, another to Florida - and I'm truly enjoying it.


If you have the TS parameters for the main driver, you can probably
design a port that will allow you to do away with the stupid passive
radiator. They are no more than a spring and a mass, just the same as
air in a port tube, but suffer added non-linearity due to the
suspension. Any subwoofer design software will let you do this.

d


Would WinISD be a good choice for this, Don? That's where I'd go first.

--
Les Cargill
  #8   Report Post  
Posted to rec.audio.pro
Don Pearce[_3_] Don Pearce[_3_] is offline
external usenet poster
 
Posts: 2,417
Default 12" passive radiator replacement?

On Sun, 5 Jan 2020 13:24:36 -0600, Les Cargill
wrote:

Don Pearce wrote:
On Sat, 4 Jan 2020 18:21:29 -0800 (PST), nickbatz
wrote:

Happy New Year.

So I just dumpster-dived a pair of mid-'80s (guessing) RS Sierra tower speakers from a neighbor.

This is a premature question because I haven't hooked them up yet, but they have 12" rear-firing passive radiators with totally shot foam surrounds.

Assuming it's worth fixing them - if only to trade someone for something else - is it likely to make any serious difference what round 12" cone-shaped thing I put back there? Serious = commensurate with the quality of these speakers.

My guess is that these are hyped speakers, because I know Rogersound Labs and other stereo stores used to compare speakers to JBL L100s in those days. But the tweeter, midrange, and woofer are outwardly in good shape. The cabinets are in reasonable shape, but because I've been doing a lot of woodworking* recently I can easily replace some of the walnut veneer if it's necessary.

TIA

* By the way, if anyone knows anyone in the market for custom studio furniture, especially a unique composer's desk, let me know and and I'll send you some pictures. This has become a serious side business - I just shipped a desk to Paris, another to Florida - and I'm truly enjoying it.


If you have the TS parameters for the main driver, you can probably
design a port that will allow you to do away with the stupid passive
radiator. They are no more than a spring and a mass, just the same as
air in a port tube, but suffer added non-linearity due to the
suspension. Any subwoofer design software will let you do this.

d


Would WinISD be a good choice for this, Don? That's where I'd go first.


WinISD is fine. You can put in the dimensions of your box, and let it
design the port.

d
  #9   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

Okay, thanks very much everyone.

I have to listen and to get an idea of how much energy these speakers warrant putting into repairing them. It's not like I don't already have a bunch of very good ones.

Mike, I'm definitely not afraid to work on drivers - I even have a heat gun and glue, etc. But I'll have to see whether it's possible to salvage the cones. I only looked at them briefly and have been out all day.

My sense is that replacing the foam with similar foam will be close enough, same with the cones if necessary.
  #10   Report Post  
Posted to rec.audio.pro
Mat Nieuwenhoven Mat Nieuwenhoven is offline
external usenet poster
 
Posts: 46
Default 12" passive radiator replacement?

On Sun, 05 Jan 2020 14:12:19 GMT, Don Pearce wrote:

On Sat, 4 Jan 2020 18:21:29 -0800 (PST), nickbatz
wrote:

Happy New Year.

So I just dumpster-dived a pair of mid-'80s (guessing) RS Sierra tower speakers from a neighbor.

This is a premature question because I haven't hooked them up yet, but they have 12" rear-firing passive radiators with totally shot foam surrounds.

Assuming it's worth fixing them - if only to trade someone for something else - is it likely to make any serious difference what round 12" cone-shaped thing I put back there? Serious = commensurate with the quality of these speakers.

My guess is that these are hyped speakers, because I know Rogersound Labs and other stereo stores used to compare speakers to JBL L100s in those days. But the tweeter, midrange, and woofer are outwardly in good shape. The cabinets are in reasonable shape, but because I've been doing a lot of woodworking* recently I can easily replace some of the walnut veneer if it's necessary.

TIA

* By the way, if anyone knows anyone in the market for custom studio furniture, especially a unique composer's desk, let me know and and I'll send you some pictures. This has become a serious side business - I just shipped a desk to Paris, another to Florida - and I'm truly enjoying it.


If you have the TS parameters for the main driver, you can probably
design a port that will allow you to do away with the stupid passive
radiator. They are no more than a spring and a mass, just the same as
air in a port tube, but suffer added non-linearity due to the
suspension. Any subwoofer design software will let you do this.


A passive radiator is designed to match the main driver and do away
with the port. A port works fine at low volumes, but if a lot of air
needs to move it suffers from compression problems, especially if the
port is longer. Plus mid-range leakage if it is at the front. A
passive radiator does not have distortion problem any more than the
matching main driver, and can be the only solution if the port would
otherwise become too long.

Mat Nieuwenhoven





  #11   Report Post  
Posted to rec.audio.pro
Don Pearce[_3_] Don Pearce[_3_] is offline
external usenet poster
 
Posts: 2,417
Default 12" passive radiator replacement?

On Mon, 06 Jan 2020 08:05:27 +0100 (CET), "Mat Nieuwenhoven"
wrote:

On Sun, 05 Jan 2020 14:12:19 GMT, Don Pearce wrote:

On Sat, 4 Jan 2020 18:21:29 -0800 (PST), nickbatz
wrote:

Happy New Year.

So I just dumpster-dived a pair of mid-'80s (guessing) RS Sierra tower speakers from a neighbor.

This is a premature question because I haven't hooked them up yet, but they have 12" rear-firing passive radiators with totally shot foam surrounds.

Assuming it's worth fixing them - if only to trade someone for something else - is it likely to make any serious difference what round 12" cone-shaped thing I put back there? Serious = commensurate with the quality of these speakers.

My guess is that these are hyped speakers, because I know Rogersound Labs and other stereo stores used to compare speakers to JBL L100s in those days. But the tweeter, midrange, and woofer are outwardly in good shape. The cabinets are in reasonable shape, but because I've been doing a lot of woodworking* recently I can easily replace some of the walnut veneer if it's necessary.

TIA

* By the way, if anyone knows anyone in the market for custom studio furniture, especially a unique composer's desk, let me know and and I'll send you some pictures. This has become a serious side business - I just shipped a desk to Paris, another to Florida - and I'm truly enjoying it.


If you have the TS parameters for the main driver, you can probably
design a port that will allow you to do away with the stupid passive
radiator. They are no more than a spring and a mass, just the same as
air in a port tube, but suffer added non-linearity due to the
suspension. Any subwoofer design software will let you do this.


A passive radiator is designed to match the main driver and do away
with the port. A port works fine at low volumes, but if a lot of air
needs to move it suffers from compression problems, especially if the
port is longer. Plus mid-range leakage if it is at the front. A
passive radiator does not have distortion problem any more than the
matching main driver, and can be the only solution if the port would
otherwise become too long.

Mat Nieuwenhoven



None of those "problems" is actually a problem. The passive driver is
just another piece of stuff to introduce its own problems.

d
  #12   Report Post  
Posted to rec.audio.pro
Mike Rivers[_2_] Mike Rivers[_2_] is offline
external usenet poster
 
Posts: 2,190
Default 12" passive radiator replacement?

On 1/5/2020 9:43 PM, nickbatz wrote:
I have to listen and to get an idea of how much energy these speakers warrant putting into repairing them. It's not like I don't already have a bunch of very good ones.


I really wish I could be more selective and brutal about what I keep. I
have a growing pile of non-working, semi-working, or
works-but-obsolete-and-has-already-been-functionally-replaced stuff -
useful, too nice to throw away, but questionable as to whether it's
worth the bother, time, and money to bring back to life.

I guess they'll go to the landfill along with me after I check out.

--
For a good time, call http://mikeriversaudio.wordpress.com
  #13   Report Post  
Posted to rec.audio.pro
Scott Dorsey Scott Dorsey is offline
external usenet poster
 
Posts: 16,853
Default 12" passive radiator replacement?

In article , Mike Rivers wrote:
On 1/5/2020 9:43 PM, nickbatz wrote:
I have to listen and to get an idea of how much energy these speakers warrant putting into repairing them. It's not like I don't already have a bunch of very good ones.


I really wish I could be more selective and brutal about what I keep. I
have a growing pile of non-working, semi-working, or
works-but-obsolete-and-has-already-been-functionally-replaced stuff -
useful, too nice to throw away, but questionable as to whether it's
worth the bother, time, and money to bring back to life.

I guess they'll go to the landfill along with me after I check out.


They will wind up at the Manassas Hamfest.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
  #14   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

On Monday, January 6, 2020 at 7:35:21 AM UTC-8, Mike Rivers wrote:

I really wish I could be more selective and brutal about what I keep.


We had rats in the garage two summers ago, which - because they're prolific - meant that everything in there had to be taken out and cleaned before being put back.

It took me and three other big guys a very long day, and I filled an entire construction trailer all the way up - you know, maybe 8' x 15' x 8' high - plus the back of the big pickup truck that hauled it - with 25 years of clutter.

Among my favorite throwings away were broken cassette decks, some old computers, two broken stereo receivers, one broken amp, some old printers, and my absolute favorite: three @#$)(@#$!!! laser printers (two to cannibalize for parts for the first) that invariably ended up with paper thrown away and toner all over the place.

I still have boxes of cables I'll never use. Who knows what's in all the cartons I didn't take the time to go through. Probably a couple of useful things.

But I'll either fix these speakers or get rid of them. They're too big to pile in the garage.
  #15   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

Speaking of Mike's AR speakers, my theory is that big - with big boxes - ported speakers (including passive radiator designs) are capable of producing a more natural-sounding low end than sealed/acoustic suspension ones.

That's the main thing I like about my UREI monitors, warts and all: the low end just sounds overwhelmingly right. I suspect it has to do with acoustic compression making smaller speakers sound more like the sound is coming from a box.Maybe it's more than just the low end, it could be the lower mids too.

Now, I also have a Blue Sky System One setup - two sealed sats + a sub. They're much better for working on, and the sub goes all the way down. And they're really good, and nice to listen to.

But I can't help thinking that even though the NFM concept has been unquestioned for at least 40 years, there's still something you can only get from big-ass monitors.


  #16   Report Post  
Posted to rec.audio.pro
Mike Rivers[_2_] Mike Rivers[_2_] is offline
external usenet poster
 
Posts: 2,190
Default 12" passive radiator replacement?

On 1/6/2020 3:43 PM, nickbatz wrote:
But I'll either fix these speakers or get rid of them. They're too big to pile in the garage.


That's pretty much the same as what I say to myself when I put something
on the pile of things to fix. Trouble is that there doesn't seem to be a
statute of limitations for broken things to remain broken. It's a
benefit and a curse of living alone.


--
For a good time, call http://mikeriversaudio.wordpress.com
  #17   Report Post  
Posted to rec.audio.pro
Don Pearce[_3_] Don Pearce[_3_] is offline
external usenet poster
 
Posts: 2,417
Default 12" passive radiator replacement?

On Mon, 6 Jan 2020 12:58:46 -0800 (PST), nickbatz
wrote:

Speaking of Mike's AR speakers, my theory is that big - with big boxes - ported speakers (including passive radiator designs) are capable of producing a more natural-sounding low end than sealed/acoustic suspension ones.

That's the main thing I like about my UREI monitors, warts and all: the low end just sounds overwhelmingly right. I suspect it has to do with acoustic compression making smaller speakers sound more like the sound is coming from a box.Maybe it's more than just the low end, it could be the lower mids too.

Now, I also have a Blue Sky System One setup - two sealed sats + a sub. They're much better for working on, and the sub goes all the way down. And they're really good, and nice to listen to.

But I can't help thinking that even though the NFM concept has been unquestioned for at least 40 years, there's still something you can only get from big-ass monitors.


I have decent large-ish sonus-faber speakers for mains and a 50 cubic
foot sub with a 15 inch Adire driver in it. That makes for very
relaxed bottom end, particularly as it is all integrated with
Sonarworks, which is so far the only software I know that measures
multiple (37) points in the room so it doesn't try to correct moding
nulls.

d
  #18   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

I have decent large-ish sonus-faber speakers for mains and a 50 cubic
foot sub with a 15 inch Adire driver in it. That makes for very
relaxed bottom end, particularly as it is all integrated with
Sonarworks, which is so far the only software I know that measures
multiple (37) points in the room so it doesn't try to correct moding
nulls.



Thinking about it, it may be the size of the box itself that I'm hearing. I've heard quite a few small ported speakers that lack a relaxed sound.
  #19   Report Post  
Posted to rec.audio.pro
Trevor Trevor is offline
external usenet poster
 
Posts: 2,820
Default 12" passive radiator replacement?

On 6/01/2020 12:53 am, Scott Dorsey wrote:
In article , Mike Rivers wrote:
On 1/4/2020 9:21 PM, nickbatz wrote:
Assuming it's worth fixing them - if only to trade someone for something else - is it likely to make any serious difference what round 12" cone-shaped thing I put back there? Serious = commensurate with the quality of these speakers.


A passive radiator is just a driver without the motor. When you get an
"edge kit" you leave the original cone in place, so you don't have to
worry about matching the cone mass and stiffness, they thing that should
match the original is the stiffness of the suspension.


A lot of passive radiators, though, have the stiffness entirely the result
of the surround; there is no spider, no other suspension and so consequently
the surround has to be constructed differently and the surround needs to
be selected properly for the driver.

I have some Advent speakers that had foam rot. I'd never worked on a
speaker before so I was hesitant to operate on them, but figured that
for ten bucks or so I'd give it a try. It worked out just fine. The
hardest part is to get all the the old glue off the frame where the
suspension is attached.


In the case of speakers, the stiffness is mostly the result of the spider,
so you can swap out the surround with impunity without affecting the
driver Fs appreciably.

I got my kit from Simply Speakers. Their web site gave me enough
confidence that I could do the job, and they were helpful with some
pre-purchase questions. You might take a look and see if they already
know what you need and can supply it.

https://www.simplyspeakers.com/ of course.


Passive radiators aren't expensive. The stiffness on them varies. If it
were me, I'd get one of every kind that Madisound sells, try them in turn,
and see which one gives most accurate low end. Then I'd buy a second one
of that model for the other speaker.



A lot of passive radiators are tuned by adding mass to the cone. So if
you can measure the bass response, it will be cheaper to simply adjust
the cone mass. Cheaper still to throw away the PR and tune the box with
a port.


  #20   Report Post  
Posted to rec.audio.pro
Michael Beacom[_4_] Michael Beacom[_4_] is offline
external usenet poster
 
Posts: 26
Default 12" passive radiator replacement?

On 2020-01-06 15:35:17 +0000, Mike Rivers said:

On 1/5/2020 9:43 PM, nickbatz wrote:
I have to listen and to get an idea of how much energy these speakers
warrant putting into repairing them. It's not like I don't already have
a bunch of very good ones.


I really wish I could be more selective and brutal about what I keep. I
have a growing pile of non-working, semi-working, or
works-but-obsolete-and-has-already-been-functionally-replaced stuff -
useful, too nice to throw away, but questionable as to whether it's
worth the bother, time, and money to bring back to life.

I guess they'll go to the landfill along with me after I check out.


And let the mermaids flirt with you?
(https://weeniecampbell.com/wiki/inde..._Flirt_With_Me)


I'd offer to help with the stuff, but suffer from the same affliction.

Cheers
Mike





  #21   Report Post  
Posted to rec.audio.pro
Michael Beacom[_4_] Michael Beacom[_4_] is offline
external usenet poster
 
Posts: 26
Default 12" passive radiator replacement?

On 2020-01-06 17:50:57 +0000, Scott Dorsey said:

In article , Mike Rivers wrote:
On 1/5/2020 9:43 PM, nickbatz wrote:
I have to listen and to get an idea of how much energy these speakers
warrant putting into repairing them. It's not like I don't already have
a bunch of very good ones.


I really wish I could be more selective and brutal about what I keep. I
have a growing pile of non-working, semi-working, or
works-but-obsolete-and-has-already-been-functionally-replaced stuff -
useful, too nice to throw away, but questionable as to whether it's
worth the bother, time, and money to bring back to life.

I guess they'll go to the landfill along with me after I check out.


They will wind up at the Manassas Hamfest.
--scott


When is the Manassas Hamfest?
Havn't been to one in too long.
Cheers
Mike

  #22   Report Post  
Posted to rec.audio.pro
Mike Rivers[_2_] Mike Rivers[_2_] is offline
external usenet poster
 
Posts: 2,190
Default 12" passive radiator replacement?

On 1/7/2020 11:33 PM, Michael Beacom wrote:
When is the Manassas Hamfest?


https://w4ovh.net/welcome-to-manassas-hamfest/

June 13 this year. ARRL.org has a hamfest calendar on line

--
For a good time, call http://mikeriversaudio.wordpress.com
  #23   Report Post  
Posted to rec.audio.pro
Scott Dorsey Scott Dorsey is offline
external usenet poster
 
Posts: 16,853
Default 12" passive radiator replacement?

Michael Beacom wrote:

When is the Manassas Hamfest?
Havn't been to one in too long.


June 13.

The next regional one would be the Richmond Frostfest on Feb 1. I think it's
actually bigger than Manassas these days although the weather is much worse.
--scott


--
"C'est un Nagra. C'est suisse, et tres, tres precis."
  #24   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

On Tuesday, January 7, 2020 at 8:05:09 PM UTC-8, Trevor wrote:

A lot of passive radiators are tuned by adding mass to the cone. So if
you can measure the bass response, it will be cheaper to simply adjust
the cone mass. Cheaper still to throw away the PR and tune the box with
a port.


That's beyond my ken.

I mean, I can measure the bass response, but I have NFI how to tune the box with a port.
  #25   Report Post  
Posted to rec.audio.pro
Don Pearce[_3_] Don Pearce[_3_] is offline
external usenet poster
 
Posts: 2,417
Default 12" passive radiator replacement?

On Wed, 8 Jan 2020 11:08:42 -0800 (PST), nickbatz
wrote:

On Tuesday, January 7, 2020 at 8:05:09 PM UTC-8, Trevor wrote:

A lot of passive radiators are tuned by adding mass to the cone. So if
you can measure the bass response, it will be cheaper to simply adjust
the cone mass. Cheaper still to throw away the PR and tune the box with
a port.


That's beyond my ken.

I mean, I can measure the bass response, but I have NFI how to tune the box with a port.


The software will do that for you.

d


  #26   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?


The software will do that for you.

d



Ah. Well, maybe if these speakers turn out to be worth it I'll think about that.
  #27   Report Post  
Posted to rec.audio.pro
gregz gregz is offline
external usenet poster
 
Posts: 131
Default 12" passive radiator replacement?

nickbatz wrote:
On Tuesday, January 7, 2020 at 8:05:09 PM UTC-8, Trevor wrote:

A lot of passive radiators are tuned by adding mass to the cone. So if
you can measure the bass response, it will be cheaper to simply adjust
the cone mass. Cheaper still to throw away the PR and tune the box with
a port.


That's beyond my ken.

I mean, I can measure the bass response, but I have NFI how to tune the box with a port.


Port or passive start out measuring impedance. The passive or port will
reduce woofer excursion over most of the low bass range, to almost none.
Selecting a frequency say around 50 Hz, putting hand near port will make
woofer move more. Adding some sticky gum to passive will do same thing. I
would first measure passive resonant frequency to see if it's proper. You
can visual tune very close to same watching impedance plots. Converting to
port is not always possible. Some of the other aspects get complicated, as
I read a very nice write up on the subject, beyond what I wanted to see.

Greg
  #28   Report Post  
Posted to rec.audio.pro
Les Cargill[_4_] Les Cargill[_4_] is offline
external usenet poster
 
Posts: 1,383
Default 12" passive radiator replacement?

nickbatz wrote:
On Tuesday, January 7, 2020 at 8:05:09 PM UTC-8, Trevor wrote:

A lot of passive radiators are tuned by adding mass to the cone. So if
you can measure the bass response, it will be cheaper to simply adjust
the cone mass. Cheaper still to throw away the PR and tune the box with
a port.


That's beyond my ken.

I mean, I can measure the bass response, but I have NFI how to tune the box with a port.


WinISD will allow you to play with this to your heart's content.

--
Les Cargill
  #29   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

WinISD will allow you to play with this to your heart's content.

--
Les Cargill


Coolio. I don't have an audio interface on any of my Windows machines (I just use them as slaves to play samples), but if it's just entering specs that should work.

Thaniks!
  #30   Report Post  
Posted to rec.audio.pro
geoff geoff is offline
external usenet poster
 
Posts: 1,812
Default 12" passive radiator replacement?

On 11/01/2020 7:27 pm, nickbatz wrote:
WinISD will allow you to play with this to your heart's content.

--
Les Cargill


Coolio. I don't have an audio interface on any of my Windows machines (I just use them as slaves to play samples), but if it's just entering specs that should work.

Thaniks!


Surely you wouldn't have a PC that *hasn't* some sort of audio interface
on the mainboard, at least ?!!

geoff


  #31   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

Surely you wouldn't have a PC that *hasn't* some sort of audio interface
on the mainboard, at least ?!!

geoff



Well, when I said "any of" my Windows machines, that really meant the new on - only 2009. The others are all Pentium 4s I haven't turned on in years.

But it does have system audio going out via Microsoft Remote Desktop to the Mac I access it from.

And I do have more than one class-compliant USB audio interface lying around, so maybe I'm guilty of hyperbole.
  #32   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

EGG ON FACE.

After removing the crumbled foam, it turns out that these aren't passive radiators at all, they're 12" rear-firing woofers!

So these are sealed tower boxes with 3-way speakers on the front - including what looks like a soft-dome tweeter with a plastic cage on it that I'll have to look at more closely to see whether it wants removing (i.e. I'll have to see whether it's just for protection, as opposed to being some kind of wave guide).

The cones are moving freely, which is enouraging.

Sorry for the false passive radiator alarm. Will pick up a couple of surrounds from ebay and make these things work.
  #33   Report Post  
Posted to rec.audio.pro
Scott Dorsey Scott Dorsey is offline
external usenet poster
 
Posts: 16,853
Default 12" passive radiator replacement?

nickbatz wrote:
EGG ON FACE.

After removing the crumbled foam, it turns out that these aren't passive ra=
diators at all, they're 12" rear-firing woofers!


No problem, then, much easier to deal with. Just refoam them.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."
  #34   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

No problem, then, much easier to deal with. Just refoam them.
--scott


Yup. Already ordered the surrounds.

RSL made hundreds of similar speakers, and the reason I assumed it was passive is that I found a brochure for a model that looked just like this one that did have a passive radiator.

These look like they were meant to be good living room speakers, probably not audiophile-level but on the higher end of RSL's lines.
  #35   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

Since the world is waiting with bated breath - update: I fixed them.

Not bad. Haven't connected them to my good power amp (Hafler 9505), but the biggest problem is almost no useful response below 50Hz - despite having two 12" woofers each.

My first thought was that the front- and rear-firing woofers aren't in phase, but nope.

Probably not keepers, but I'm only 90% sure.


  #36   Report Post  
Posted to rec.audio.pro
Trevor Trevor is offline
external usenet poster
 
Posts: 2,820
Default 12" passive radiator replacement?

On 23/01/2020 7:33 am, nickbatz wrote:
Since the world is waiting with bated breath - update: I fixed them.

Not bad. Haven't connected them to my good power amp (Hafler 9505), but the biggest problem is almost no useful response below 50Hz - despite having two 12" woofers each.


Pretty normal when the T/S parameters aren't suitable for a small box.
You often get higher efficiency than a smaller driver, but not
necessarily lower bass.
  #37   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

Pretty normal when the T/S parameters aren't suitable for a small box.
You often get higher efficiency than a smaller driver, but not
necessarily lower bass.


I know everything.

That is, except for what T/S paramaters are.
  #38   Report Post  
Posted to rec.audio.pro
Scott Dorsey Scott Dorsey is offline
external usenet poster
 
Posts: 16,853
Default 12" passive radiator replacement?

nickbatz wrote:
Since the world is waiting with bated breath - update: I fixed them.

Not bad. Haven't connected them to my good power amp (Hafler 9505), but the biggest problem is almost no useful response below 50Hz - despite having two 12" woofers each.

My first thought was that the front- and rear-firing woofers aren't in phase, but nope.


If the slope of the rolloff is very sharp (sharper than 6dB/octave), they
likely were designed to have been used with a subwoofer. They are from that
era where the sat/sub thing was becoming very popular.
--scott


--
"C'est un Nagra. C'est suisse, et tres, tres precis."
  #39   Report Post  
Posted to rec.audio.pro
nickbatz nickbatz is offline
external usenet poster
 
Posts: 159
Default 12" passive radiator replacement?

If the slope of the rolloff is very sharp (sharper than 6dB/octave), they
likely were designed to have been used with a subwoofer. They are from that
era where the sat/sub thing was becoming very popular.
--scott



Could be, and the rolloff is pretty steep. There actually is some useful response at 40, but between 60 and 30 there's more than a 6dB cut.

But these are tower speakers, and the RSL brochure I found online with similar-looking speakers (except passive radiators, hence my original assumption) didn't have a sub in it.

I'd expect there to be a crossover to the sub built in, even though these are passive xovers. Still, whether or not that was the design, Ima try hooking up my Blue Sky sub just for fun.

By the way, Manny LaCarubba (Sausalito Audioworks), who's as good a speaker designer as there is, uses subs in his systems. The twist is that he uses multiple ones, not just a single one. So it's not just that era!
  #40   Report Post  
Posted to rec.audio.pro
Ty Ford[_2_] Ty Ford[_2_] is offline
external usenet poster
 
Posts: 102
Default 12" passive radiator replacement?

On Wednesday, January 22, 2020 at 3:33:08 PM UTC-5, nickbatz wrote:
My first thought was that the front- and rear-firing woofers aren't in phase, but nope.

Probably not keepers, but I'm only 90% sure.


Shouldn't the front and rear be out of phase?
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
BA VR-975 Passive Radiator help _BOOTSY_ Pro Audio 2 August 27th 06 08:42 PM
which way the passive radiator emit sound waves toward? front? rear? bj Pro Audio 3 May 10th 05 12:00 AM
FA: KEF SP1042 PASSIVE RADIATOR Dwayne Marketplace 0 June 5th 04 03:33 PM


All times are GMT +1. The time now is 04:59 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"