Home |
Search |
Today's Posts |
#1
|
|||
|
|||
behringer mx802A modification.
greetings,
I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. ..jukka |
#2
|
|||
|
|||
behringer mx802A modification.
"Jukka Andersson" wrote in
message greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. Sell it on eBay and pick up a MXB1002. |
#3
|
|||
|
|||
behringer mx802A modification.
"Jukka Andersson" wrote in
message greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. Sell it on eBay and pick up a MXB1002. |
#4
|
|||
|
|||
behringer mx802A modification.
"Jukka Andersson" wrote in
message greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. Sell it on eBay and pick up a MXB1002. |
#5
|
|||
|
|||
behringer mx802A modification.
"Jukka Andersson" wrote in
message greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. Sell it on eBay and pick up a MXB1002. |
#6
|
|||
|
|||
behringer mx802A modification.
"Jukka Andersson" wrote in
message greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. Sell it on eBay and pick up a MXB1002. |
#7
|
|||
|
|||
behringer mx802A modification.
You can use the 2 aux busses for the other two outputs. The only
modification required is to cut two traces on the printed circuit board and add two jumpers. It is documented in the manual. I use mine this way all of the time and it works great! "Jukka Andersson" wrote in message ... greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. .jukka |
#8
|
|||
|
|||
behringer mx802A modification.
You can use the 2 aux busses for the other two outputs. The only
modification required is to cut two traces on the printed circuit board and add two jumpers. It is documented in the manual. I use mine this way all of the time and it works great! "Jukka Andersson" wrote in message ... greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. .jukka |
#9
|
|||
|
|||
behringer mx802A modification.
You can use the 2 aux busses for the other two outputs. The only
modification required is to cut two traces on the printed circuit board and add two jumpers. It is documented in the manual. I use mine this way all of the time and it works great! "Jukka Andersson" wrote in message ... greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. .jukka |
#10
|
|||
|
|||
behringer mx802A modification.
You can use the 2 aux busses for the other two outputs. The only
modification required is to cut two traces on the printed circuit board and add two jumpers. It is documented in the manual. I use mine this way all of the time and it works great! "Jukka Andersson" wrote in message ... greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. .jukka |
#11
|
|||
|
|||
behringer mx802A modification.
thx.
this is what I needed ..jukka "JWV Miller" wrote in message om... You can use the 2 aux busses for the other two outputs. The only modification required is to cut two traces on the printed circuit board and add two jumpers. It is documented in the manual. I use mine this way all of the time and it works great! "Jukka Andersson" wrote in message ... greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. .jukka |
#12
|
|||
|
|||
behringer mx802A modification.
thx.
this is what I needed ..jukka "JWV Miller" wrote in message om... You can use the 2 aux busses for the other two outputs. The only modification required is to cut two traces on the printed circuit board and add two jumpers. It is documented in the manual. I use mine this way all of the time and it works great! "Jukka Andersson" wrote in message ... greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. .jukka |
#13
|
|||
|
|||
behringer mx802A modification.
thx.
this is what I needed ..jukka "JWV Miller" wrote in message om... You can use the 2 aux busses for the other two outputs. The only modification required is to cut two traces on the printed circuit board and add two jumpers. It is documented in the manual. I use mine this way all of the time and it works great! "Jukka Andersson" wrote in message ... greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. .jukka |
#14
|
|||
|
|||
behringer mx802A modification.
thx.
this is what I needed ..jukka "JWV Miller" wrote in message om... You can use the 2 aux busses for the other two outputs. The only modification required is to cut two traces on the printed circuit board and add two jumpers. It is documented in the manual. I use mine this way all of the time and it works great! "Jukka Andersson" wrote in message ... greetings, I would like to make my Behringer mixer as a an discreet 4 channel micpre with total 4 outputs inviditually from micpre (micpre channel 1 goes output 1 and channel 2 goes to output 2 etc.) I need to make quadrophonic recordings with this setup and thought to make these "insert like" outputs for my otherwise nice mixer. .jukka |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Behringer guitar amps rule!! | Pro Audio | |||
Behringer Products | Pro Audio | |||
BEHRINGER VAMPIRE, Great !!! Nice Price | Pro Audio | |||
BEHRINGER guitar amps, they really rock! | Pro Audio | |||
Behringer MX802A line inputs | Pro Audio |