Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Hyundai Sante Fe Front Doors
I'm about to get my whole system installed, and I had a question about
the whether or not it's neccessary to get a kick panel for my front doors. I'm putting the CDT HD62's in the front door, with the tweeter in the stock pillar location. Also, the image enhancement kit will go in the very front pillars pointed toward the windshield. At this point, the stock 6.5" locations are pointed pretty much straight on toward my legs. What would you do in this situation? The tweeters are already ear level in the pillars, so is it necessary for the midbasses to be angled also. The rest of the system goes as follows: 2 Infinity Perfect 10.1 SVC in Obcon sealed box powered by a Bazooka EL1500(500 watts RMS into 2ohm mono), Eclipse 3242 powering the front stage and rear fill(probably a CDT coax). Sony MPX-CD30 with a half DIN Soundstream 5 band parametric with master, sub, and aux level controls. Oh yeah, hushmat or fatmat everywhere! Thanks for the advice....Matt |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
HELP, The front speakers go mute when engine turns on | Car Audio | |||
Is front center channel sufficient? | Audio Opinions | |||
Constant Directivity Horns, "Radial" vs. Flat Front, etc. | Pro Audio | |||
DynAudio MW180 - ?? on using it in front stage | Car Audio | |||
Front speakers cutting out. | Car Audio |