Home |
Search |
Today's Posts |
#121
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Arny Krueger" Naahh, its not worth it to drop to Phildo's level. Phildo tried to force me out of my volunteer's job at church by sending a poison pen email to the pastor of my church. Trouble is, Phildo's over-the-top writing style made it completely obvious that the guy who wrote it is completely unhinged. We've had a few prayer meetings for Phildo, but it is unlikely that we're going to help him much. ** No mere prayer meeting will get any result for Phildo's soul. For that, you need a full séance with lotsa sulphur and incantations directed to Satan himself. Phildo may then appear, rising up through the floor boards, with the blood of his child victim dripping off him. ........ Phil |
#122
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Arny Krueger" wrote in message . .. It's already a clone of .... whoops I've forgotten. (I even had the sales brochure at one time.) Do try to remember. I'm curious. Alesis comes to mind? I can't see QSC wanting to copy it though, it's not really all that good. Why do you say that the A500 is not good? Well it's OK I guess, but I prefer the EP1500 myself for not too much more. MrT. |
#123
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
Arny Krueger wrote: "Phildo" wrote "Mr.T" MrT@home wrote in message Depends on the actual fault. Have you even looked yet? He claims to be a god in audio design yet cannot even fix something as simple as that. (1) Design work and repair work are distinct skills. They often come together, but there's no rule saying they have to. I have plenty of experience of repair work from the past. I learnt a fair bit of useful practical stuff from that too which comes in useful when designing new products. It's something I generally prefer to avoid now, at least the routine hum-drum stuff but I continue to provide repair work as a service to the local venue since they need someone reliable. I have however never made my living explicitly as a repairman but rather as a technician for a couple of years early in my career and as a designer and consultant thereafter. (2) Graham hasn't tried and failed - he's just griping about the absence of reasonable service tools. Just service info really. A schematic isn't much to ask for. It's the standard benchmark requirement for servicing work. Do you honestly think the legendary studiomater designer would lower himself to look at Behringer gear? Seems to me that he already has. Phildo is labouring under an illusion that I'm anti-Behringer. It's a fact that I've recommended their products on a number of occasions despite my reservations about the service issue. Graham |
#124
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Mr.T" wrote: "Eeyore" wrote in message SMT pacakaging has nothing to do with increasing the price. The DIL version was 4p more in fact. I can't seem to spot it no matter how hard I look! Don't you believe me ? NO!!!!!!!!! http://uk.farnell.com/jsp/Semiconduc...RUMENTS/TL072C P/displayProduct.jsp?sku=1106015 Where does it list the labor cost to replace SMT components? **** OFF you pathetic troll Graham |
#125
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Eeyore" wrote in message ... SMT pacakaging has nothing to do with increasing the price. The DIL version was 4p more in fact. I can't seem to spot it no matter how hard I look! Don't you believe me ? NO!!!!!!!!! http://uk.farnell.com/jsp/Semiconduc...RUMENTS/TL072C P/displayProduct.jsp?sku=1106015 Where does it list the labor cost to replace SMT components? **** OFF you pathetic troll Now you don't even know what a troll is. Hint, it's not someone who simply proves you are a lying dickhead. MrT. |
#126
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Mr.T" wrote: "Eeyore" wrote You tell me yours, I'll tell you my hourly rate. My hourly rate (plus tax) makes the price you quoted fair and reasonable, as I already stated. YOUR hourly rate must be quite pathetic since *you* claim it was unreasonable. I claimed it was unreasonable to replace a single op-amp. The problem with having to send it away to a COMPANY to repair it is that you end up paying that company's overheads too (plus significant pointless P&P charges). I've known companies whose overheads add 600% over the direct labour cost. I doubt the repairer himself gets paid more than £10 an hour. I wouldn't work for that. Graham |
#127
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Phil Allison" wrote in message
"Arny Krueger" Naahh, its not worth it to drop to Phildo's level. Phildo tried to force me out of my volunteer's job at church by sending a poison pen email to the pastor of my church. Trouble is, Phildo's over-the-top writing style made it completely obvious that the guy who wrote it is completely unhinged. We've had a few prayer meetings for Phildo, but it is unlikely that we're going to help him much. ** No mere prayer meeting will get any result for Phildo's soul. To date I know of far more prayer meetings than any discernable positive change in Phildo. For that, you need a full séance with lotsa sulphur and incantations directed to Satan himself. Not my style. Phildo may then appear, rising up through the floor boards, with the blood of his child victim dripping off him. Wasn't more than one child involved in that wreck where Phildo was driving? |
#128
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Mr.T" wrote: "Eeyore" wrote SMT pacakaging has nothing to do with increasing the price. The DIL version was 4p more in fact. I can't seem to spot it no matter how hard I look! Don't you believe me ? NO!!!!!!!!! http://uk.farnell.com/jsp/Semiconduc...RUMENTS/TL072C P/displayProduct.jsp?sku=1106015 Where does it list the labor cost to replace SMT components? **** OFF you pathetic troll Now you don't even know what a troll is. Hint, it's not someone who simply proves you are a lying dickhead. Lying about WHAT ? you MORON ? Jeez, you're an idiot and a half. Graham |
#129
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Eeyore" wrote in
message "Mr.T" wrote: "Eeyore" wrote You tell me yours, I'll tell you my hourly rate. My hourly rate (plus tax) makes the price you quoted fair and reasonable, as I already stated. YOUR hourly rate must be quite pathetic since *you* claim it was unreasonable. I claimed it was unreasonable to replace a single op-amp. The problem with having to send it away to a COMPANY to repair it is that you end up paying that company's overheads too (plus significant pointless P&P charges). In the case of the CX3400, it probably costs about the same to round-trip it any distance, than it would be worth as well-used equipment. |
#130
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Eeyore" wrote in message ... You tell me yours, I'll tell you my hourly rate. My hourly rate (plus tax) makes the price you quoted fair and reasonable, as I already stated. YOUR hourly rate must be quite pathetic since *you* claim it was unreasonable. I claimed it was unreasonable to replace a single op-amp. You still have NO idea if it's a single op-amp, and IF it is, the cost is still about right for a COMMERCIAL repair facility to actually find the fault (rather than psychic guesses), replace an SMT IC, and provide a warranty on the repairs. The problem with having to send it away to a COMPANY to repair it is that you end up paying that company's overheads too (plus significant pointless P&P charges). And I agreed all along that service information *should* be available. I've known companies whose overheads add 600% over the direct labour cost. I doubt the repairer himself gets paid more than £10 an hour. I wouldn't work for that. You will be if you fix it yourself :-) MrT. |
#131
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Mr.T" MrT@home wrote in message
u "Arny Krueger" wrote in message . .. It's already a clone of .... whoops I've forgotten. (I even had the sales brochure at one time.) Do try to remember. I'm curious. Alesis comes to mind? Agreed - sort of. Alesis RA 500 looked similar, but was far more costly. Seems to have been dropped. Alesis RA 300 priced higher, looks similar, but lower powered and seems to lack the extensive LED metering. Alesis RA 150 priced the same, looks similar, but far lower powered and seems to lack the extensive LED metering. I can't see QSC wanting to copy it though, it's not really all that good. Why do you say that the A500 is not good? Well it's OK I guess, but I prefer the EP1500 myself for not too much more. I like the A-500's No fan Multiple consumer and pro I/O connections Power lever is just right for smaller rooms, but not enough to really hurt people or break things. Light and small. But you're right - the appearance and general feel looks like someone was targeting the Alesis second-gen RA series. |
#132
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Eeyore" wrote in message ... Lying about WHAT ? you MORON ? That you included labor costs when you didn't! Try Google if you've forgotten already!!!!!!!!! Jeez, you're an idiot and a half. Still looking in the mirror then. MrT. |
#133
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Arny Krueger" wrote in message ... Alesis comes to mind? Agreed - sort of. Alesis RA 500 looked similar, but was far more costly. Seems to have been dropped. Ah that was it. Yes more expensive of course, but otherwise identical as I recall. Well it's OK I guess, but I prefer the EP1500 myself for not too much more. I like the A-500's No fan Run the EP1500 at the lower power level into 8 ohm loads and you can switch the fan off or reduce it's speed. Multiple consumer and pro I/O connections Power lever is just right for smaller rooms, but not enough to really hurt people or break things. Light and small. All fair enough resons if it suits your requirements. But you're right - the appearance and general feel looks like someone was targeting the Alesis second-gen RA series. I'm pretty sure it's closer than you seem to think. Maybe time to check with Alesis for a schematic? :-) MrT. |
#134
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
Shame too, as I am a big Behringer supporter otherwise, however there is NO WAY I would condone such *pathetic* excuses for with-holding service information. behringer is very generous with the warrentte often repairing equipment well beyond its"use by" date along with a no questions asked exchange of warrentte fails the efforts behringer is putting into being a world class customer service company are paying off you should not be so cynical I am sorry for all the company you have had less than stellar experiances with if you need access to anyone at behringer , just ask that said they make some great units and some real crap the ddx3216 is a amazing mixer, the deq/dcx iis worth 10x what you pay for them the analouge eq's are about as bad a unit as the alesis are I would need a hazmat team to deal with them if I was to discard them as for holding thier diagrams and such close to home if that is such a big deal in some one world, buy something else every company has the right to decide thier own policies and proceedures one can not rightfully find fault simply take your business elsewhere george |
#135
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Mr.T" MrT@home wrote in message ... "Eeyore" wrote in message ... You tell me yours, I'll tell you my hourly rate. My hourly rate (plus tax) makes the price you quoted fair and reasonable, as I already stated. YOUR hourly rate must be quite pathetic since *you* claim it was unreasonable. I claimed it was unreasonable to replace a single op-amp. You still have NO idea if it's a single op-amp, and IF it is, the cost is still about right for a COMMERCIAL repair facility to actually find the fault (rather than psychic guesses), replace an SMT IC, and provide a warranty on the repairs. The problem with having to send it away to a COMPANY to repair it is that you end up paying that company's overheads too (plus significant pointless P&P charges). call behringer they will "most likely" send you a box and pay shipping both ways. I know thios from experiance they are a world class customer service organization george |
#136
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Mr.T" MrT@home wrote in message ... "Eeyore" wrote in message ... SMT pacakaging has nothing to do with increasing the price. The DIL version was 4p more in fact. I can't seem to spot it no matter how hard I look! Don't you believe me ? NO!!!!!!!!! http://uk.farnell.com/jsp/Semiconduc...RUMENTS/TL072C P/displayProduct.jsp?sku=1106015 Where does it list the labor cost to replace SMT components? **** OFF you pathetic troll Now you don't even know what a troll is. Hint, it's not someone who simply proves you are a lying dickhead. MrT. actually Mr. T you have been pretty much balanced and polite in this thread I have no idea who you are but you make your point without a'lot" of ego or vendetta, unlike some posters here |
#137
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
Arny Krueger wrote:
The point is that replacing SMT parts can be a very non-trivial task, compared to replacing an ordinary leaded part. Not really. Go to www.chipquik.com and get a sample. With a $100 temperature controlled iron and a $20 solder sucker and a roll of chipquik you can even do those hundred-pin SMT parts, in the field, with little more effort than working on DIPs. A headworn magnifier is recommended, though. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#138
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Scott Dorsey = A really smart guy
On Wed, 26 Sep 2007 10:20:02 -0400, Phil Allison wrote
(in article ): "Ty Ford" Hey Phil, ** Never "hey" me - you pile of sub haman ASD ****ed, top posting CRIMINAL DUNG !!!!!!! Do the whole planet a favour, top yourself now. ....... Phil Hey Phil, I'm holding up a finger for you. Guess which one? To the group: No Phil, you are not part of the group. I think we need to ratchet Hey Phil down a bit. While taking a crap this morning, I had this idea of converting his banal retorts into number. For example ****wad parrot would simply be "1." "Criminal Dung" would be "2", etc. Since Hey Phil apparently has a quite limited vocabulary of insults, this wouldn't take long and would make the group a much nicer place. Regards, Ty Ford --Audio Equipment Reviews Audio Production Services Acting and Voiceover Demos http://www.tyford.com Guitar player?:http://www.youtube.com/watch?v=4RZJ9MptZmU |
#139
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
Mr.T MrT@home wrote:
"Arny Krueger" wrote in message ... Oh, and I had a couple of ECM 8000s loose so much sensitivity that I scrapped them after about 2 years. Don't tell me that, my ECM8000 is about 2 years old. Still working I hope! :-) Some of them fail due to cold solder joints. Some of them fail due to the electret going bad. The capsules in those microphones are Ningbo copies of the Panasonic WM-60. The current Panasonic WM-061A should fit as a replacement and they will also be a good bit quieter than the originals. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#140
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Arny Krueger" wrote in message . .. Narhh, its not that simple. Graham has a well-known gripe that many people share. What, that they cannot make money out of doing substandard repairs on Behringer gear? You know as well as I do that is not why Eyesore is ****ed at them though. I don't know anybody that is being helped by Behringer's secrecy about their schematics, not even them! I do. Every user of Behringer gear that needs service or repair. By keeping it to authorised Behringer service agents they can weed out the backroom repair brigade like Mr Assillon and keep standards high. Sorry you are so slow that most simple concept flew waaaaaay over your head Arnold. Phildo |
#141
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Arny Krueger" wrote in message . .. I don't like their gear. So what? How many years did you badmouth it on AAPLS and viciouisly attack just about every poor stiff who made the mistake of admitting You have a very selective memory Arnold. I didn't badmouth anything, I pointed it out for what it was. I still do. Eyesore DID lose his job because of Behringer though. Prove it. Studiomaster went bust because they couldn't compete with companies like behringer any more. Graham lost his job as a result. Is that simple enough for you or do you need it dumbed down further to be able to comprehend it? So do you still claim that 95% of professional mixing desks do not have PFL metering? A yes or no will do fine Arnold. Phildo |
#142
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Arny Krueger" wrote in message . .. "Eeyore" wrote in message Phildo wrote: "Mr.T" MrT@home wrote "Eeyore" wrote So YOU work for nothing then? He has to. He lost his job because of Behringer Untrue. hence his constant bitching about them. You'll be losing YOUR job if you maintain your crackhead libellous posts. Your lawyers not come through for you then? Such a shame and after you promised so faithfully that I would be hearing from them. I've been tempted before to complain to your employer and maybe now it's the time. Go for it ****wit. Do you enjoy being laughed at? Naahh, its not worth it to drop to Phildo's level. Phildo tried to force me out of my volunteer's job at church by sending a poison pen email to the pastor of my church. Trouble is, Phildo's over-the-top writing style made it completely obvious that the guy who wrote it is completely unhinged. We've had a few prayer meetings for Phildo, but it is unlikely that we're going to help him much. While you would like everyone to believe that Arnold, I was not the only one who had to resort to writing to your pastor about your lunatic behaviour and disruption of this newsgroup. How do you explain that away? Phildo |
#143
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Arny Krueger" wrote in message . .. ** No mere prayer meeting will get any result for Phildo's soul. To date I know of far more prayer meetings than any discernable positive change in Phildo. That is because the god you are praying to doesn't exist and my sould doesn't need help. Phildo may then appear, rising up through the floor boards, with the blood of his child victim dripping off him. Wasn't more than one child involved in that wreck where Phildo was driving? No Arnold, just the one. The same amount of children you've had kill themselves because of the shame of having you as a father (or maybe the abuse you put him through). Still, several more still to go or maybe your grandkids will follow in his footsteps if you abuse them as well. Phildo |
#144
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
Eeyore wrote:
Thread title is self-explanatory. The local venue's crossover has developed a fault where the LF outs are quite distorted. I dare say it would likely be an easy fix but the difficulty of obtaining a schematic is a problem. I'd also phone Behringer's UK service agent for a quote if I knew if they have one. Does anyone know who does it ? Mind you, with the packaging long ago thrown away, it's not very practical to send it the length of the country. Poor service support is definitely Behringer's achilles heel. That runs directly counter to my own experience with Behringer support. Have you contacted Jim Savery's office? Jim Savery Global Customer Support Manager BEHRINGER The Americas BEHRINGER USA, Inc Tel: +01-425-672-0816 x 111 Direct Dial: +01-425-939-3216 Fax: +01-425-673-7647 IP Phone Ext: 5024 http://www.behringer.com -- ha Iraq is Arabic for Vietnam |
#145
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Arny Krueger" wrote in message ... BTW Phildo, aren't you about ready to fall off your meds, and write another poison pen letter about me to the pastor of the church where I serve? No need Arny. There are people in your church who are watching you very closely and taking careful notes. Oh yes Phildo, and they are flying around in black helicopters! ;-) Sorry Arny, they never mentioned what vehicles they drive. Let's just say moves are afoot to show you up for what you really are. Maybe the'll string me up this Saturday when I video the youth pastor's ordination ceremony? I think I can speak for everyone here (except maybe Assillon and Eyesore who share your lack of sanity) when I say we can only live in hope. Phildo |
#146
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Arny Krueger" wrote in message . .. "Eeyore" wrote in message and those shpould point out the diffrences in the powersuppy, protection,output circut designs and layouts unfortunatly some people feel that haveing a diffrent power section, layout,protection,and output section not to mention diffrent physical chasssis is not enough to qualify as a diffrent amp They're NOT different you blind lying idiot. Graham, I don't think George is lying because you have to correctly perceive the truth to lie about it. :-(. The whole issue would probably be over George's head were he sober, and he compounds the problem by posting drunk. Nice to see the two village idiots getting on so well. Phildo |
#147
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Mr.T" wrote: "Eeyore" wrote Lying about WHAT ? you MORON ? That you included labor costs when you didn't! I never said anything about including labour costs. Graham |
#148
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
hank alrich wrote: Eeyore wrote: Thread title is self-explanatory. The local venue's crossover has developed a fault where the LF outs are quite distorted. I dare say it would likely be an easy fix but the difficulty of obtaining a schematic is a problem. I'd also phone Behringer's UK service agent for a quote if I knew if they have one. Does anyone know who does it ? Mind you, with the packaging long ago thrown away, it's not very practical to send it the length of the country. Poor service support is definitely Behringer's achilles heel. That runs directly counter to my own experience with Behringer support. But you're in the USA. It's different there. There is quite simply no Behringer UK to contact for example. Have you contacted Jim Savery's office? Jim Savery Global Customer Support Manager BEHRINGER The Americas BEHRINGER USA, Inc Tel: +01-425-672-0816 x 111 Direct Dial: +01-425-939-3216 Fax: +01-425-673-7647 IP Phone Ext: 5024 http://www.behringer.com He's *GLOBAL* support ? OK, I may just do that. Thanks, Graham |
#149
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Mr.T" MrT@home wrote in message ... "Eeyore" wrote in message ... Simply 'looking' at it won't be any help. I know very well how Behringer assemble their 1u rack kit though (I've seen a number of other bits of their gear) and I know it's going to be far from straightforward to work on without a schematic. You *know* no such thing. Yes I do. Now you claim to be a Psychic as well, He's psychotic not psychic. Phildo |
#150
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Phildo" wrote in message
"Arny Krueger" wrote in message . .. "Eeyore" wrote in message Phildo wrote: "Mr.T" MrT@home wrote "Eeyore" wrote So YOU work for nothing then? He has to. He lost his job because of Behringer Untrue. hence his constant bitching about them. You'll be losing YOUR job if you maintain your crackhead libellous posts. Your lawyers not come through for you then? Such a shame and after you promised so faithfully that I would be hearing from them. I've been tempted before to complain to your employer and maybe now it's the time. Go for it ****wit. Do you enjoy being laughed at? Naahh, its not worth it to drop to Phildo's level. Phildo tried to force me out of my volunteer's job at church by sending a poison pen email to the pastor of my church. Trouble is, Phildo's over-the-top writing style made it completely obvious that the guy who wrote it is completely unhinged. We've had a few prayer meetings for Phildo, but it is unlikely that we're going to help him much. While you would like everyone to believe that Arnold, I was not the only one who had to resort to writing to your pastor about your lunatic behaviour and disruption of this newsgroup. How do you explain that away? Real simple Phildo - there's a lot of weirdos posting on Usenet. I guess you haven't noticed since you are one of them! |
#151
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
Phildo wrote: "Arny Krueger" wrote Narhh, its not that simple. Graham has a well-known gripe that many people share. What, that they cannot make money out of doing substandard repairs on Behringer gear? So you don't think anyone other than Behringer can perform a competent repair do you ? Your detachment from reality is truly remarkable. Graham |
#152
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
Phildo wrote: By keeping it to authorised Behringer service agents they can weed out the backroom repair brigade like Mr Assillon and keep standards high. You mean they keep prices high and encourage ppl to junk stuff and buy again new. Graham |
#153
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
Phildo wrote: "Arny Krueger" wrote I don't like their gear. So what? How many years did you badmouth it on AAPLS and viciouisly attack just about every poor stiff who made the mistake of admitting You have a very selective memory Arnold. I didn't badmouth anything, I pointed it out for what it was. I still do. Eyesore DID lose his job because of Behringer though. Prove it. Studiomaster went bust because they couldn't compete with companies like behringer any more. Not true. They had a dispute with their primary Asian subcontractor which meant they were starved of product and had to shut down shop. Shutting down was a voluntary action. It wasn't forced on them. At the time sales were plentiful. There was something like £1 million of product in outstanding sales. And we were both competitive on price and profitable. Futhermore I even explained this in detail here ages back. Graham |
#154
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
Phildo wrote: Graham lost his job as a result. Only briefly as it happens. Graham |
#155
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
made it completely obvious that the guy who wrote it is completely unhinged. We've had a few prayer meetings for Phildo, but it is unlikely that we're going to help him much. While you would like everyone to believe that Arnold, I was not the only one who had to resort to writing to your pastor about your lunatic behaviour and disruption of this newsgroup. How do you explain that away? or the fact that within 3 days, at pro sound web, your fellow church sound people had enough of you to banish you from thier forum , for life your a real piece of work arnii k. too bad we can't do the same here. George |
#156
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
wrote in message ... you should not be so cynical Not being cynical, just stating facts. Being cynical would imply there is a VALID reason for them with-holding service information. Despite your excuses, there is only their own self interest at heart, certainly not that of the customers. as for holding thier diagrams and such close to home if that is such a big deal in some one world, buy something else every company has the right to decide thier own policies and proceedures one can not rightfully find fault simply take your business elsewhere Contradiction alert! IF you could not find fault, you wouldn't need to take your business elsewhere. As I already stated, I find the cheap Behringer equipment good value, simply because it is disposable, NOT because of their crappy customer (non) support policies. Maybe instead of making excuses, Behringer should listen to what their customers are saying? MrT. |
#157
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Phildo" wrote in message ... I don't know anybody that is being helped by Behringer's secrecy about their schematics, not even them! I do. Every user of Behringer gear that needs service or repair. By keeping it to authorised Behringer service agents they can weed out the backroom repair brigade like Mr Assillon and keep standards high. The simple fact is that Behringer are happy that most equipment is thrown away rather than repaired, even if the repair is within the capabilities of the owner to fix. As I said before, it's amazing that the cheapest stuff on the market thinks they need to "weed out the backroom repair brigade", when the players at quality end feel no such need. :-) MrT. |
#158
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Phildo" wrote in message ... So do you still claim that 95% of professional mixing desks do not have PFL metering? A yes or no will do fine Arnold. Many Yamaha desks do not unfortunately! I guess it depends on who is defining "professional mixing desks" :-) MrT. |
#159
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Eeyore" wrote in message ... I never said anything about including labour costs. Nor about not being able to read, remember what you wrote, or use Google when you can't. MrT. |
#160
Posted to alt.audio.pro.live-sound,rec.audio.pro,rec.audio.tech
|
|||
|
|||
Does anyone have a schematic for a Behringer CX3400
"Mr.T" MrT@home wrote in message ... wrote in message ... you should not be so cynical Not being cynical, just stating facts. Being cynical would imply there is a VALID reason for them with-holding service information. Despite your excuses, there is only their own self interest at heart, certainly not that of the customers. as for holding thier diagrams and such close to home if that is such a big deal in some one world, buy something else every company has the right to decide thier own policies and proceedures one can not rightfully find fault simply take your business elsewhere Contradiction alert! IF you could not find fault, you wouldn't need to take your business elsewhere. As I already stated, I find the cheap Behringer equipment good value, simply because it is disposable, NOT because of their crappy customer (non) support policies. Maybe instead of making excuses, Behringer should listen to what their customers are saying? MrT. sorry Mr. t thier customers are saying give us really low cost kit one of the ways is to limit distribution on technical materials it keeps te price down FAR more pf thier customers are happy with te way things are it would be foolish to go against the millions of satisifed users to cater to a few wildcat techs who want to play inside gear that is designed for mass production, not small back room solder jockey benches if the eyesores of tis world are so interested in fixing 100 dollar processors let them become authorized thier warrentee is excellent thier customer service is worldclass they and I see no need for every kid with a soldering pencil and more free time than brains to have access to tis information there is a excellent service network in place simply use it. george |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Does anyone have a schematic for a Behringer CX3400 | Pro Audio | |||
Behringer C1 | Pro Audio | |||
Behringer UB2442FX Mixer Schematic/voltages Needed | Pro Audio | |||
Behringer does it !!! | Pro Audio | |||
BEHRINGER SHIPS THE Behringer V-AMPIRE LX1-112 | Pro Audio |