Home |
Search |
Today's Posts |
#1
|
|||
|
|||
PD-TM1 cycles through discs, but no sound..
Pioneer juke box has three cartridges with six discs in each.
Unit turns on from receiver as usual, but no music sounds of late. As each disc is addressed, the symbol disappears until the cycle stops. Receiver set to CD as usual, but no sound starts as each disc addressed. Cause? Help w/b appreciated. Miss all that music. Jeanne |
#2
|
|||
|
|||
George Kubitsch, Hungary, reported
this problem in 2002 via diyAudio Forum. He found the laser had unseated from the top of the unit and glued it back in place. Dare I try this, too? Jeanne who wonders if anyone from the delphi.com Home Theater forum posts here. That group was active from mid-1994 through 1998, if memory serves. Very helpful as I installed two systems and set up more than ten sixteen inch woofers in those days-- they still sound great, btw. Pioneer juke box has three cartridges with six discs in each. Unit turns on from receiver as usual, but no music sounds of late. As each disc is addressed, the symbol disappears until the cycle stops. Receiver set to CD as usual, but no sound starts as each disc addressed. Cause? Help w/b appreciated. Miss all that music. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
SOUND EMPORIUM Proven Authorized Dealers - BUY with 100% CONFIDENCE | Marketplace | |||
the emperor's clothes | High End Audio | |||
Sound, Music, Balance | High End Audio | |||
hum..buzz sound !!! help!! it's annoying~ | Pro Audio | |||
Australian commission rejects complaint about copy-control music discs | Pro Audio |