Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Does anyone know where I can get a line-to-phone input converter?
I'm looking for a line-to-phone converter so that I can run line level
sources into the phono inputs on my mixer. This requires a reverse RIAA response conversion and an attenuator. Anyone know where I can find such a little trinket? |
#2
|
|||
|
|||
Bill wrote:
I'm looking for a line-to-phone converter so that I can run line level sources into the phono inputs on my mixer. This requires a reverse RIAA response conversion and an attenuator. Anyone know where I can find such a little trinket? Going that route would add huge amounts of distortion to a clean line level signal . . . if you can find that type of converter. You're better off just getting another mixer with more line level inputs. CD |
#3
|
|||
|
|||
"Bill" wrote in message
... I'm looking for a line-to-phone converter so that I can run line level sources into the phono inputs on my mixer. This requires a reverse RIAA response conversion and an attenuator. Anyone know where I can find such a little trinket? Inverse RIAA & General Converter Modules: http://www.esdl.co.uk/body/invriaa/invriaa.htm |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Power Filtration | Audio Opinions | |||
Help with Line Level Input on RF sub amp | Car Audio | |||
Power conditioner or power cord or something else | Audio Opinions | |||
Mackie PPM 808M Stereo Input Problem | Pro Audio | |||
Record off Phone Line? | General |