Home |
Search |
Today's Posts |
#1
|
|||
|
|||
help me pick the best pre's
Hi, i've been reading the group here for about 6 months and this is my
first post. I'm a student at Mesa Community College in mesa, az where i'm going to be doing a couple recordings for my recording classes there. I'm going to be recording my own band and another band. Both are rock bands and my goal is to put out something better than some of crap that I think local bands are paying project studios to put out around here. Maybe its too ambitious, but our studio has the equipment to pull it off, if I do my job well enough. So here's my question: I'm trying to decide what preamps to use on what instruments. I may not have time to audition different pre's on sources as I only have 6 hours for the session. Our console is an SSL E series broadcast console so we've got pretty decent pre's in the board. I also have access to 2 outboard pre's. We have a pair of Daking pre's and eq's and a pair of Millenia Media pre's. i've read up on all previous posts on these pre's to get an idea of what to use. So far, I plan to use the Daking pre's for kick and snare, and possibly electric guitars. I've read that the Millenia Media is very transparent which would make it ideal for overheads and any accoustic instruments? not too sure on that....i dont know what to use on bass guitar or vocals? some info on the bass and vox: bass will be a music man bass that will be taken direct and possibly miced through an amp. i think the best amp that i could get my hands on is a 100 watt ampeg combo with a single 15 in it. its the basic amp thats like $500 at GC. cant remember the number. dont know if this will really help me out more than the direct sound. vox will be loud aggressive male vocals. mic will most likely be a TLM103, possibly a U89. consensus around the studio is that the TLM103 sounds much better for vocals but i've not compared them myself. i plan to before tracking. so, are my plans good? which pre's would you use on what? there's also a chance that i could have access to an API 312 pre. i think thats the right number. it's in our 2nd studio and the patch bay isnt wired up right yet so i cant use it now but maybe i could at a later date for vocals. the only problem is that i wont have access to the TLM103 and will be forced to use the U89 if i go to the other studio. if the API is a clear winner over the others for vocals this could be an option that would also give me a little extra time to get the vocals right since i have to do a second project in that studio anyways. sorry for the long post. help me out guys, i know you know your ****. thanks jake |
#2
|
|||
|
|||
With the limited time you have for this session, and considering the
high quality of the gear that you have on hand, I would spend less time worrying too much about which mic pre to use, and more worrying about mic choice and mic placement. You might try auditioning a dynamc mic for the vocals, sometimes they can give better results than a condensor. Oh yeah, and if at all possible, do some pre-production work with the performers, especially if they are inexperienced in the studio... this would probably do more to improve the results than which mic pre you pick. Al On 9 Feb 2005 13:13:51 -0800, "Jake Saliba" wrote: Hi, i've been reading the group here for about 6 months and this is my first post. I'm a student at Mesa Community College in mesa, az where i'm going to be doing a couple recordings for my recording classes there. I'm going to be recording my own band and another band. Both are rock bands and my goal is to put out something better than some of crap that I think local bands are paying project studios to put out around here. Maybe its too ambitious, but our studio has the equipment to pull it off, if I do my job well enough. So here's my question: I'm trying to decide what preamps to use on what instruments. I may not have time to audition different pre's on sources as I only have 6 hours for the session. Our console is an SSL E series broadcast console so we've got pretty decent pre's in the board. I also have access to 2 outboard pre's. We have a pair of Daking pre's and eq's and a pair of Millenia Media pre's. i've read up on all previous posts on these pre's to get an idea of what to use. So far, I plan to use the Daking pre's for kick and snare, and possibly electric guitars. I've read that the Millenia Media is very transparent which would make it ideal for overheads and any accoustic instruments? not too sure on that....i dont know what to use on bass guitar or vocals? some info on the bass and vox: bass will be a music man bass that will be taken direct and possibly miced through an amp. i think the best amp that i could get my hands on is a 100 watt ampeg combo with a single 15 in it. its the basic amp thats like $500 at GC. cant remember the number. dont know if this will really help me out more than the direct sound. vox will be loud aggressive male vocals. mic will most likely be a TLM103, possibly a U89. consensus around the studio is that the TLM103 sounds much better for vocals but i've not compared them myself. i plan to before tracking. so, are my plans good? which pre's would you use on what? there's also a chance that i could have access to an API 312 pre. i think thats the right number. it's in our 2nd studio and the patch bay isnt wired up right yet so i cant use it now but maybe i could at a later date for vocals. the only problem is that i wont have access to the TLM103 and will be forced to use the U89 if i go to the other studio. if the API is a clear winner over the others for vocals this could be an option that would also give me a little extra time to get the vocals right since i have to do a second project in that studio anyways. sorry for the long post. help me out guys, i know you know your ****. thanks jake |
#3
|
|||
|
|||
Use the SSL preamps. Don't touch any of the outboard stuff. Get a sense of what the console preamps sound like before you even worry about the rest of it. You're going to have enough of a time selecting microphones and getting mike placement right, so don't worry about anything beyond that. Just stick with the console preamps and save yourself some time in the process. They might not be the best, but they'll be serviceable on everything. And stop worrying so much. Have a cup of tea and listen to the band play. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#4
|
|||
|
|||
yeah i was planning on taking most of my time dealing with mic choice
and placement. actually probably most of it will just be making sure that the performance is up to par. thats why i was asking you guys about the pres. i wasnt going to have time to compare them to eachother during the session. too much time doing all the other stuff. i should clarify, i cant use the API for anything but vocals because its in a separate studio. that studio has API pres but it doesnt have the beautiful sounding enormous room that i'll be using for the drums, guitars, etc. yes, i know i'm spoiled. i'm probably obsessing a bit but hey i only get one chance to record my project all semester. as for the suggestion to use the SM7 or a dynamic, even considering the style, i love the detail of the condenser on vocals. also, i used an RE20 on my vocals last time (i'm the singer) and it just didnt seem to fit in the mix the way i wanted to. too tubby on my low notes, and for some reason i dont understand, that particular mic picks up every single ess i put out even with a pop filter. |
#5
|
|||
|
|||
"Jake Saliba" wrote in message oups.com... yeah i was planning on taking most of my time dealing with mic choice and placement. actually probably most of it will just be making sure that the performance is up to par. thats why i was asking you guys about the pres. i wasnt going to have time to compare them to eachother during the session. too much time doing all the other stuff. i should clarify, i cant use the API for anything but vocals because its in a separate studio. that studio has API pres but it doesnt have the beautiful sounding enormous room that i'll be using for the drums, guitars, etc. yes, i know i'm spoiled. i'm probably obsessing a bit but hey i only get one chance to record my project all semester. as for the suggestion to use the SM7 or a dynamic, even considering the style, i love the detail of the condenser on vocals. also, i used an RE20 on my vocals last time (i'm the singer) and it just didnt seem to fit in the mix the way i wanted to. too tubby on my low notes, and for some reason i dont understand, that particular mic picks up every single ess i put out even with a pop filter. A good pop filter won't affect esses. The reason the RE20 picks them up so well is that it has a peak up top that's right in some people's sibilant range. If you're one of them, I'd give first look at the U-89 for your voice. Also try singing a few degrees off-axis. Peace, Paul |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: Trident 80 inputs, pres etc. | Pro Audio | |||
Behringer ADA8000 Quick Review | Pro Audio | |||
Colorful pres and sidecars | Pro Audio | |||
2 Mic Pres in chain | Pro Audio | |||
Upgrading from Mackie pres to??? | Pro Audio |