Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Setup Tek 576 for Tube Curve Tracer?
Hi Ya'l!
I wonder if anyone here has already jumped through the hoops to configure the test fixture input connections, build a socket switcher, filament + screen supply etc. for a Tektronix 576 for use as a tube c-tracer? (I don't want to reinvent the wheel if I can avoid it, needless to say I'd like to save time/frustration...) Thanks go to Mr. Alan Douglas, whos' (sp?) book* I bought through AES for tipping me that the 576 would be one to have, w/1500KV available stock for PlateV. Got one yesterday recently retired in GWO. I'm preparing to gut a guitar amp chassis for use as my tube test fixture, both 9pin min and 8octal for common preamp/power tube testing/matching. Maybe two chassis's, one for each purpose? (*'Tube Testers and Classic Electronoc Test Gear', what a great compendem! I didn't realize other folk could be a geeked as I am about old test gear!) If anyone has done this before, any thoughts/guidance things-to-avoid will be greatly appreciated, I'm anticipating that stray capacitance, shielding, wiring layout could be issues... ...and that I'll have to 'trick' the HV interlock...any reversable mods to a stock 576 that would make it more suitable for vacuum tube use? Thanks very much in advance, -Robert QTS http://www.Braught.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Voice-over recording setup | Pro Audio | |||
Is this setup possible? | Car Audio | |||
Save and Recall PC CMOS Setup | Pro Audio | |||
Curve Tracer: UPDATE | Tech | |||
Sub setup in an SUV, Single 12W7 setup or Dual 12W6 | Car Audio |