Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
Driver for 500W @ 12kHz
Bob writes:
I'm looking for a driver that is able to handle a sine wave signal at 12kHz with a power of 500W RMS. Does such a driver exist? Or would I need to use multiple instances? If I lower the power to (say) 100W is this more achieveable? This is dangerous, to you, and to others. Ethical considerations require that your experiment be confined to a lab. A couple other folks have said this. You're getting close to weaponized audio teritory here, be very careful. Regards, Richard .... Remote audio in the southland: See www.gatasound.com -- | Remove .my.foot for email | via Waldo's Place USA Fidonet-Internet Gateway Site | Standard disclaimer: The views of this user are strictly his own. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Driver for 500W @ 12kHz | Pro Audio | |||
FS: Phaze Audio Line Driver model LD-2 Butler Tube driver on Ebay | Car Audio | |||
FS: Phaze Audio Line Driver model LD-2 Butler Tube driver on Ebay | Marketplace | |||
500W RMS Stereo amp stable@1ohm?? | Car Audio | |||
FS: Kenwood 500w Subwoofer w/ Encloser | Car Audio |