Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.tubes
GRe GRe is offline
external usenet poster
 
Posts: 67
Default HT Delay Switch

Posted on a.b.s.e a schematic to delay B+ after power on.
Something different as it is (almost throughout) hollow state.

Now, who's the purist to eliminate the last bit of upgraded
sand (D1) without compromising the circuit's functionality?

Regards,
Gio


  #2   Report Post  
Posted to rec.audio.tubes
GRe GRe is offline
external usenet poster
 
Posts: 67
Default HT Delay Switch


"Patrick Turner" wrote in message
...
On Feb 20, 8:40 pm, "GRe" wrote:
Posted on a.b.s.e a schematic to delay B+ after power on.
Something different as it is (almost throughout) hollow state.

Now, who's the purist to eliminate the last bit of upgraded
sand (D1) without compromising the circuit's functionality?

Regards,
Gio


[...]

So for one reason or 100 others, I cannot view a.b.s.e


[...]

Here's another link:
http://www.radioconstructors.info/ga...leht/page1.jpg
http://www.radioconstructors.info/ga...leht/page2.jpg
http://www.radioconstructors.info/ga...leht/page3.jpg

Regards,
Gio


  #3   Report Post  
Posted to rec.audio.tubes
Patrick Turner Patrick Turner is offline
external usenet poster
 
Posts: 3,964
Default HT Delay Switch

On Feb 21, 11:38*pm, "GRe" wrote:
"Patrick Turner" wrote in message

...
On Feb 20, 8:40 pm, "GRe" wrote: Posted on a.b.s.e a schematic to delay B+ after power on.
Something different as it is (almost throughout) hollow state.


Now, who's the purist to eliminate the last bit of upgraded
sand (D1) without compromising the circuit's functionality?


Regards,
Gio


[...]

So for one reason or 100 others, I cannot view a.b.s.e


[...]

Here's another link:http://www.radioconstructors.info/ga...leht/page3.jpg

Regards,
Gio


For those who might like to use a TV diode to operate some sort of
delayed B+ turn on the 1970 magazine article in the links might be
pleasing.

The operation of the circuit shown in the schematic is not clear from
just reading the schematic and the authors didn't undestand that
people in 2011 prefer to look at a schematic and see straight away how
it works without having to wade through a lengthy and obtuse article
about how it works.

But I much prefer to avoid any use of vacuum tubes in power supplies
and just use simple solid state devices and a simple ordinary 12V
relay or two which can all still be purchased easily and cheaply as
discrete parts from Radio Shack, Mouser, Maplin, Dick Smith, Jaycar,
etc.

Patrick Turner.
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lever Switch or Key Switch suppliers (UK) Ian Bell[_2_] Vacuum Tubes 15 February 24th 09 08:00 PM
Looking for this switch (Midas Venice solo switch) Eeyore Pro Audio 30 September 10th 08 12:24 PM
Delay JasonDamianUs Tech 0 February 9th 07 01:18 AM
(No Dry) Delay U. Cortez Pro Audio 5 June 14th 05 02:51 PM
Need Diagram for Time Delay Relay to delay amp for 1 second or so William Pitt Car Audio 4 September 13th 03 12:32 AM


All times are GMT +1. The time now is 09:29 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"