[ansermetniac]

http://www.ccrane.com/lights/led-light-bulbs/index.aspx

I can't find a replacement for the oem bulb in the Thorens 126 MKII
at Radio Shack, Lowes or Home Depot.Anybody?


TIA

An old flurosent and a homemade disc I printed out from the internet
seems to work

Abbedd

[Richard Crowley]

"ansermetniac" wrote ...
http://www.ccrane.com/lights/led-light-bulbs/index.aspx

Maybe, but I doubt it.

I can't find a replacement for the oem bulb in the Thorens 126 MKII
at Radio Shack, Lowes or Home Depot.Anybody?

Without a number (or even a description) only someone with an
identical turntable could possibly answer your question.

There is a discussion in rec.audio.pro about this very subject.
Recommended reading.

[Dave Platt]

http://www.ccrane.com/lights/led-light-bulbs/index.aspx

They might, or might not. Depends on the details of the power supply
arrangements for the LED(s).

If you can find a display of these, just look at it, and then snap
your eyes from one side to the other. If the bulbs are pulsing you'll
see this in the afterimage... it'll look like a line of dots of light.
If they're continuously lit you'll just see a streak of light.

I can't find a replacement for the oem bulb in the Thorens 126 MKII
at Radio Shack, Lowes or Home Depot.Anybody?

http://www.mouser.com/catalog/636/106.pdf

Take a look at the neon bulbs at the bottom of this page. One of them
may have the right socket arrangement.

--
Dave Platt AE6EO
Friends of Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

[Trevor Wilson[_2_]]

"ansermetniac" wrote in message
...
http://www.ccrane.com/lights/led-light-bulbs/index.aspx

**No.


I can't find a replacement for the oem bulb in the Thorens 126 MKII
at Radio Shack, Lowes or Home Depot.Anybody?

**I suspect you may require some professional to do the job for you. It's
not that difficult.



TIA

An old flurosent and a homemade disc I printed out from the internet
seems to work

**Yep. As will a handful of LEDs, correctly installed into your turntable.


--
Trevor Wilson
www.rageaudio.com.au