Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tech
|
|||
|
|||
Dolby Digital "AC-3" Original Standards
Just wanted to clear up a few facets on how the most widely used
digital discrete-5channel surround sound format works. First, is the maximum bit-rate around 196kbps per channel, or is that the summed bitrate of all channels combined? Next, if I understand correctly, Dolby Digital does not run all 5 main channels at the maximum bitrate at all times. Does this mean it "pools" the maximum bitrate for the *busiest* channel(s) at any given point in the soundtrack? And what is the lowest bitrate a "quiet" channel allowed to run at? Finally, is the LFE(sub) channel runnng at a fixed bitrate that doesn't vary like the 5 mains? Thanks for any input you can provide for my ??s! -ChrisCoaster |
#2
Posted to rec.audio.tech
|
|||
|
|||
Dolby Digital "AC-3" Original Standards
"ChrisCoaster" wrote in message
Just wanted to clear up a few facets on how the most widely used digital discrete-5-channel surround sound format works. First, is the maximum bit-rate around 196kbps per channel, or is that the summed bitrate of all channels combined? Do the math. Dolby digital runs over the same kind of digital channel as 48 KHz 2-channel PCM. I have an audio DAC that will lock up on a DD digital stream. It reports that it is 48 KHz 2-channel PCM. It puts out some pretty good white noise. Total bitrate = 2 * 16 * 48 KHz = 1536 kbps. However, while there are 6 discrete channels, one of them has a very low data rate, because it is sharply low pass filtered. 1536 kbps / 5.1 = 301. kbps 1536 kbps / 5 = 307.2 kbps Next, if I understand correctly, Dolby Digital does not run all 5 main channels at the maximum bitrate at all times. Does this mean it "pools" the maximum bitrate for the *busiest* channel(s) at any given point in the soundtrack? What you are asking is whether DD is VBR. DD can be VBR. Standard decoders can handle the feature if it appears in the bitstream. And what is the lowest bitrate a "quiet" channel allowed to run at? It's not about quiet, its about complexity. But of course a totally dead channel has zero complexity = essentially zero data rate. Finally, is the LFE(sub) channel running at a fixed bitrate that doesn't vary like the 5 mains? AFAIK, the LFE can be VBR as well. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Dolby 330 and "cat" world | Pro Audio | |||
Dolby Lab's "uncompressor"? | Pro Audio | |||
"AKAI", "KURZWEIL", "ROLAND", DVDs and CDs | Audio Opinions |