Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Oktava 319 mod?
Is there anything I can do to get my 319 to sound better? I remember
reading about someone placing felt type material inside the mic but is there anything else I can do? It does seem to have this cardboard-boxy kinda sound to it. Mic pre's used are soundcraft Ultra's and a Presonus BlueTube. Thanks, M |
#2
|
|||
|
|||
Oktava 319 mod?
ask from Taylor Johnson, he does know Oktava's very deeply..
http://www.sound-room.com/ ..jukka "mine12u" wrote in message om... Is there anything I can do to get my 319 to sound better? I remember reading about someone placing felt type material inside the mic but is there anything else I can do? It does seem to have this cardboard-boxy kinda sound to it. Mic pre's used are soundcraft Ultra's and a Presonus BlueTube. Thanks, M |
#3
|
|||
|
|||
Oktava 319 mod?
You can upgrade all the electronics to increase the bandwidth and
guess what? It may sound worse without the rolloff. Then what? The capsules vary so your mileage will vary as well. Best to get a different mic. There are some good cheap mics....but an expensive mic sounds so nice. jj On 25 Aug 2003 10:55:34 -0700, (mine12u) wrote: Is there anything I can do to get my 319 to sound better? I remember reading about someone placing felt type material inside the mic but is there anything else I can do? It does seem to have this cardboard-boxy kinda sound to it. Mic pre's used are soundcraft Ultra's and a Presonus BlueTube. Thanks, M |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FA: Lomo, Oktava mics/parts, Neutrik, Switchcraft | Pro Audio | |||
Oktava MK 319s? | Pro Audio | |||
Oktava MK-012 Capsule | Pro Audio | |||
Black Oktava MK012 | Pro Audio | |||
Comments about M3 head for Oktava MC012 | Pro Audio |