Home |
Search |
Today's Posts |
#1
|
|||
|
|||
WTB Filter cap for ARC preamp
I am looking for a filter cap for my ARC SP-3B preamp. For the
historians in the group the SP-3B came between the SP3A1 and the SP6 and is an updated version of the 3A1. What I need is a 300mf @ 300volt filter can with narrow type prongs (4). Please check over your stock and email me with price etc. Thanks Richard |
#2
|
|||
|
|||
My Eico HF87 uses the same type of caps...I ended up putting under the
chassis and using radial types..330uf/385v. There is a fellow on ebay selling these fairly reasonably priced or I believe Vacuum tube valley has the can types..look on their site. "rich9876" wrote in message om... I am looking for a filter cap for my ARC SP-3B preamp. For the historians in the group the SP-3B came between the SP3A1 and the SP6 and is an updated version of the 3A1. What I need is a 300mf @ 300volt filter can with narrow type prongs (4). Please check over your stock and email me with price etc. Thanks Richard |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Preamp Design Fundamentals | Pro Audio | |||
Low pass/High pass filters=bandpass filter | Tech | |||
AES Show Report (LONG!!!!) | Pro Audio | |||
Highpass filter for DIY preamp | Pro Audio |