Home |
Search |
Today's Posts |
#1
|
|||
|
|||
problem with old mac mono block
hi, i have a pair of old mac 50-w2 mono blocks and one got sick tonight. the first symptom was a rushing noise a few seconds after the amp was turned on, much like being between channels with a old tube AM radio. i powered it off and suspecting a tube swapped tubes with the working amp. problem satyed with the same amp - so not likely a tube. i then swapped outputs to the speakers - problem stayed with the amp - so not the speaker. when i put it all back together and tried again, one of the output tubes flashed blue and the fuse blew. when i've had similar problems in the past, it's been a bad tube, but it doesn't look like that this time. thoughts? -- Lance |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
common mode rejection vs. crosstalk | Pro Audio | |||
Topic Police | Pro Audio | |||
DNC Schedule of Events | Pro Audio |