Home |
Search |
Today's Posts |
#1
|
|||
|
|||
TLM193
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=7326374870
I just bought this mic and am wondering about its condition. It sounds good to me, but I don't have a new one to compare it to to know if there is indeed damage done to it. The grill is a little loose, but I'm sure that's easily fixable. Should I send this to Neumann to get checked out? Maybe someone here would like to check it out for me? : ) Thomas |
#2
|
|||
|
|||
Thomas,
I never heard back from the seller when I asked about the condition and what he knew about it. However, if it sounds good, don't worry about it. I don't think you want to spend any more on it if you don't have to! Mike |
#4
|
|||
|
|||
|
#5
|
|||
|
|||
"Mike Rivers" wrote in message
It sounds just fine here. Really, what kind of answer did you expect? Was it so cheap that you can afford an overhaul if it needs one? I didn't expect any kind of answer, really. I paid $500 for it, and although I don't know how much it would be to refurbish it, I was willing to take that chance. It seems to sound very clear and neutral, not hyped in the high end, and that's what I've read that it's supposed to sound like. So I guess if it sounds good, it is good. |
#6
|
|||
|
|||
"John L Rice" wrote in message
What part of the world are you in? I'm in the greater Seattle/Tacoma USA area and I own 2 TLM193's that I purchased used. I'm about 60 miles northwest of Memphis. |
#7
|
|||
|
|||
"Thomas Bishop" wrote in message ... "John L Rice" wrote in message What part of the world are you in? I'm in the greater Seattle/Tacoma USA area and I own 2 TLM193's that I purchased used. I'm about 60 miles northwest of Memphis. Ahh, too far away to get together and compare! ;-) There must be someone in Memphis that has a TLM193 to compare to. Try asking over at www.gearslutz.com/. Best of luck! John L Rice |
#8
|
|||
|
|||
"Thomas Bishop" wrote in message
m... "Mike Rivers" wrote in message It sounds just fine here. Really, what kind of answer did you expect? Was it so cheap that you can afford an overhaul if it needs one? I didn't expect any kind of answer, really. I paid $500 for it, and although I don't know how much it would be to refurbish it, I was willing to take that chance. It seems to sound very clear and neutral, not hyped in the high end, and that's what I've read that it's supposed to sound like. So I guess if it sounds good, it is good. It probably is OK. What you describe is what mine sound like to me. It can't hurt to talk to Neumann to see how much a refurbish job would cost. I paid around $700 each for my TLM193's so even if you spend $200 to $300 to refurb yours you'll still be in the same ball park of a good priced for a used one ( I think list is $1599 or so these days ) Or, instead of sending it to Neumann, you could try one of the respected third parties that do mic restorations and upgrades. Might be kind of fun. I read once that someone thought the TLM193's got better after a certain serial number but I can't remember what supposedly changed or what the serial number cutoff is. I do remember both of mine have serial numbers prior to this claimed change. -- John L Rice |
#9
|
|||
|
|||
On Fri, 17 Jun 2005 13:01:35 -0400, John L Rice wrote
(in article ): "Thomas Bishop" wrote in message m... "Mike Rivers" wrote in message It sounds just fine here. Really, what kind of answer did you expect? Was it so cheap that you can afford an overhaul if it needs one? I didn't expect any kind of answer, really. I paid $500 for it, and although I don't know how much it would be to refurbish it, I was willing to take that chance. It seems to sound very clear and neutral, not hyped in the high end, and that's what I've read that it's supposed to sound like. So I guess if it sounds good, it is good. It probably is OK. What you describe is what mine sound like to me. It can't hurt to talk to Neumann to see how much a refurbish job would cost. I paid around $700 each for my TLM193's so even if you spend $200 to $300 to refurb yours you'll still be in the same ball park of a good priced for a used one ( I think list is $1599 or so these days ) Or, instead of sending it to Neumann, you could try one of the respected third parties that do mic restorations and upgrades. Might be kind of fun. I read once that someone thought the TLM193's got better after a certain serial number but I can't remember what supposedly changed or what the serial number cutoff is. I do remember both of mine have serial numbers prior to this claimed change. I traded my RCA 44B for a U 89 a few years back. I sent the U 89 to Neumann in CT. They found a few things and sent it back. Don't remember the cost, but it wasn't outrageous and it works like a charm. Ty Ford -- Ty Ford's equipment reviews, audio samples, rates and other audiocentric stuff are at www.tyford.com |
#10
|
|||
|
|||
John, the electronics of the TLM 193 were changed starting with serial
number 5825; microphones after that point have about 4-1/4 dB greater sensitivity. The newer microphones draw 3 mA rather while the older ones drew 2.4 mA. All other specifications and characteristics remain unchanged. Neumann USA (www.neumannusa.com) generally charges a $70 estimate fee to check out a microphone; if repairs are needed, the $70 fee is then waived. A loose grille is probably a simple mechanical issue. The housing, by the way, accounts for almost 3/4 the weight of the TLM 193--the entire assembly of capsule, PC board and XLR connector weighs only 1.5 ounces! --best regards |
#11
|
|||
|
|||
"David Satz" wrote in message oups.com... John, the electronics of the TLM 193 were changed starting with serial number 5825; microphones after that point have about 4-1/4 dB greater sensitivity. The newer microphones draw 3 mA rather while the older ones drew 2.4 mA. All other specifications and characteristics remain unchanged. Neumann USA (www.neumannusa.com) generally charges a $70 estimate fee to check out a microphone; if repairs are needed, the $70 fee is then waived. A loose grille is probably a simple mechanical issue. The housing, by the way, accounts for almost 3/4 the weight of the TLM 193--the entire assembly of capsule, PC board and XLR connector weighs only 1.5 ounces! --best regards Thanks for the info David! -- John L Rice |