Home |
Search |
Today's Posts |
#1
|
|||
|
|||
wiring
!doctype html public "-//w3c//dtd html 4.0 transitional//en"
html Dose anyone know the pin outs for a Kenwood kdc-c603 10 disk changer and a panasonic cq-df401u deck, i have both and the cable to connect the change to a kenwood deck, however the end for the deck is cut off and the Panasonic is deferent then the kenwood. any ideas?/html |
#2
|
|||
|
|||
wiring
You can't connect them.
The data protocal is different. "Graham" wrote in message ... Dose anyone know the pin outs for a Kenwood kdc-c603 10 disk changer and a panasonic cq-df401u deck, i have both and the cable to connect the change to a kenwood deck, however the end for the deck is cut off and the Panasonic is deferent then the kenwood. any ideas? |
#3
|
|||
|
|||
wiring
!doctype html public "-//w3c//dtd html 4.0 transitional//en"
html body bgcolor="#FFFFFF" there is a way if you know the pinout order on both pMasterson wrote: blockquote TYPE=CITEstyle/style font face="Arial"font size=-1You can't connect them./font/font font face="Arial"font size=-1The data protocal is different./font/font blockquote style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px""Graham" <a "MOle27_uvic@ hotmail.com/a wrote in message a "news:3F6 anyone know the pin outs for a Kenwood kdc-c603 10 disk changer and a panasonic cq-df401u deck, i have both and the cable to connect the change to a kenwood deck, however the end for the deck is cut off and the Panasonic is deferent then the kenwood. any ideas?/blockquote /blockquote /body /html |
#4
|
|||
|
|||
wiring
Graham,
Physically, yes you can connect them. BUT......the two microprocessors will not talk to eachother. Panasonic and Kenwood use proprietary data buses. Understand? there is a way if you know the pinout order on both You can't connect them. The data protocal is different. Dose anyone know the pin outs for a Kenwood kdc-c603 10 disk changer and a panasonic cq-df401u deck, i |
#5
|
|||
|
|||
wiring
!doctype html public "-//w3c//dtd html 4.0 transitional//en"
html body bgcolor="#FFFFFF" ok thnx then does anyone want a kenoowd 10 disk changer in perfect condition, missing cable pMasterson wrote: blockquote TYPE=CITEstyle/style font face="Arial"font size=-1Graham,/font/fontfont face="Arial"font size=-1Physically, yes you can connect them./font/font font face="Arial"font size=-1BUT......the two microprocessors will not talk to eachother./font/fontfont face="Arial"font size=-1Panasonic and Kenwood use proprietary data buses./font/fontfont face="Arial"font size=-1Understand?/font/font there is a way if you know the pinout order on both font face="Arial"font size=-1You can't connect them./font/font font face="Arial"font size=-1The data protocal is different./font/font Dose anyone know the pin outs for a Kenwood kdc-c603 10 disk changer and a panasonic cq-df401u deck, i/blockquote /body /html |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wiring for component "drawers"? | General | |||
Multi Media Wiring | General | |||
wiring a used DVA-5205 to test? | Car Audio | |||
Aerostar power door lock wiring | Car Audio | |||
Amplifier wiring kit | Car Audio |