Home |
Search |
Today's Posts |
#1
|
|||
|
|||
alpine cda-9813 no power?
hey i got the alpine cda 9813 and all was going well after i installed
it for 10 min. or so but as i pulled up to work it just stopped making sound but the power was still on like it was working. well i had to get into work so i waited till i got home the next day to mess with it and in my attempt to figure why there was no sound no i have no power what so ever. i hooked it up to the fuse box like it says and it is getting power (checked that) and no fuse is blown. any suggestions.... is there any possibility i fryed it by the slight possibility of 2 wires touching or comeing undone? |
#2
|
|||
|
|||
alpine cda-9813 no power?
Sounds like you may have been shorting out a speaker and the outputs were
shutting down. Try hooking up a single known good speaker and see what happens. If it works then hook up your car speakers one by one to find the bad one(s). Paul Vina "jimmy" wrote in message om... hey i got the alpine cda 9813 and all was going well after i installed it for 10 min. or so but as i pulled up to work it just stopped making sound but the power was still on like it was working. well i had to get into work so i waited till i got home the next day to mess with it and in my attempt to figure why there was no sound no i have no power what so ever. i hooked it up to the fuse box like it says and it is getting power (checked that) and no fuse is blown. any suggestions.... is there any possibility i fryed it by the slight possibility of 2 wires touching or comeing undone? |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: 3000 watt amp $179!! 900 watt woofers $36!! new- free shipping | General | |||
Alpine CDA-9815 vs Clarion DXZ835MP | Car Audio | |||
Alpine deck blew my subs! | Car Audio | |||
bridging a 4channel to 1 or sending 2 channels of power to one mono source? | Car Audio | |||
alpine amp configuration with 2 10's at 4 ohms? | Car Audio |