Home |
Search |
Today's Posts |
|
#1
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
Ive been having a little bit of trouble lately. The sound wont come
out of the receiver to the speakers. I just dont know whats wrong. Thanks... Jack G |
#2
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
|
#3
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
On Jan 19, 4:41*pm, jakdedert wrote:
wrote: Ive been having a little bit of trouble lately. The sound wont come out of the receiver to the speakers. I just dont know whats wrong. Thanks... Jack G Not turned on? *Not plugged in (either the receiver or the speakers)? Sorry for sounding so flip; but you've not given any clue as to what may be the problem. Try again.... jak the problem is no sound are coming out of the speakers. Everything is plugged in properly |
#4
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
No sound from any source? It doesn't work with fm, cd, any other sources?
Lights and everything comes on ok? No sound from any source suggests the amplifier section presuming that the speakers are connected properly. No teenager that might have blown both your speakers? (You guys laugh but I spent a while diagnosing a pioneer amp only to eventually find out my teen daughter turned the volume all the way up and went up stairs. 4 speakers destroyed.) wrote in message ... On Jan 19, 4:41 pm, jakdedert wrote: wrote: Ive been having a little bit of trouble lately. The sound wont come out of the receiver to the speakers. I just dont know whats wrong. Thanks... Jack G Not turned on? Not plugged in (either the receiver or the speakers)? Sorry for sounding so flip; but you've not given any clue as to what may be the problem. Try again.... jak the problem is no sound are coming out of the speakers. Everything is plugged in properly |
#5
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
On Jan 19, 5:46*pm, "jamesgangnc" wrote:
No sound from any source? *It doesn't work with fm, cd, any other sources? Lights and everything comes on ok? No sound from any source suggests the amplifier section presuming that the speakers are connected properly. No teenager that might have blown both your speakers? *(You guys laugh but I spent a while diagnosing a pioneer amp only to eventually find out my teen daughter turned the volume all the way up and went up stairs. *4 speakers destroyed.) wrote in message ... On Jan 19, 4:41 pm, jakdedert wrote: wrote: Ive been having a little bit of trouble lately. The sound wont come out of the receiver to the speakers. I just dont know whats wrong. Thanks... Jack G Not turned on? Not plugged in (either the receiver or the speakers)? Sorry for sounding so flip; but you've not given any clue as to what may be the problem. Try again.... jak the problem is no sound are coming out of the speakers. Everything is plugged in properly Actually I am a teenager. I bought it with my own money and I would never abuse anything to the point it breaks. The speakers are fine I tested them with another player. When im on the setting for ipod it just doesnt play. |
#6
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
|
#7
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
"jakdedert" wrote in message ... wrote: Ive been having a little bit of trouble lately. The sound wont come out of the receiver to the speakers. I just dont know whats wrong. Not turned on? Not plugged in (either the receiver or the speakers)? Sorry for sounding so flip; but you've not given any clue as to what may be the problem. In fact sound does not get from the "receiver to the speakers" in any case, only electrical signals. I think he needs to call someone. MrT. |
#8
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
On Jan 19, 2:09*pm, "Mr.T" MrT@home wrote:
"jakdedert" wrote in message ... wrote: Ive been having a little bit of trouble lately. The sound wont come out of the receiver to the speakers. I just dont know whats wrong. Not turned on? *Not plugged in (either the receiver or the speakers)? Sorry for sounding so flip; but you've not given any clue as to what may be the problem. In fact sound does not get from the "receiver to the speakers" in any case, only electrical signals. I think he needs to call someone. MrT. I plug my ipod into the reciever. The reciever is supposed to send that signal to the speakers. It doesn't. Im asking what my problem is cause im stumped. |
#9
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
On Mon, 19 Jan 2009 14:43:36 -0800 (PST), wrote:
I plug my ipod into the reciever. The reciever is supposed to send that signal to the speakers. It doesn't. Im asking what my problem is cause im stumped. This is a receiver and has a radio inside? Does the radio play? Does any other source play? All good fortune, Chris Hornbeck |
#10
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
wrote in message ... I think he needs to call someone. I plug my ipod into the reciever. The reciever is supposed to send that signal to the speakers. It doesn't. Im asking what my problem is cause im stumped. If you're unable to diagnose any further than that, then follow my previous suggestion. MrT. |
#11
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
"Mr.T" MrT@home wrote in message
u... wrote in message ... I think he needs to call someone. I plug my ipod into the reciever. The reciever is supposed to send that signal to the speakers. It doesn't. Im asking what my problem is cause im stumped. If you're unable to diagnose any further than that, then follow my previous suggestion. MrT. I have some experience with these. The OP has no chance of fixing it himself. If it helps, this model is a rebadged Marantz SR-92. Mark Z. |
#13
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
"Tim Schwartz" wrote in message ... These amps also run very hot and sometimes the small driver transistors in the front amps need to be resoldered or replaced. As I recall, look at Q701 and 703 in the left channel, and Q702 and 704 in the right. Q701 and 702 are 2SA1145, and Q703 and 704 are 2SC2705. If they look cooked, you might want to replace them. I doubt they would "look cooked", even if they have been destroyed. I'd check them with an ohm meter first to see if they are still functional. Which assumes he has a meter and can use it. Something not evident in the previous posts. My final comment is that if you don't know how to ohm-meter check a transistor, or have a friend who does, then its time to visit a repair shop. Which others have told him many times already. MrT. |
#14
|
|||
|
|||
Quote:
Hi Where do i find the service manual for Carver HR 895,my system works fine but the tone control i.e. bass,treble does not fuction.Or from where can i download the service manual for Carver HR895 or Marantz SR92. Are these two models the same ,what about voltages and other components. |
#15
|
|||
|
|||
Quote:
Hi Tim Where do i find the service manual for Carver HR 895,my system works fine but the tone control i.e. bass,treble does not fuction.Or from where can i download the service manual for Carver HR895 or Marantz SR92. Are these two models the same ,what about voltages and other components. |
#16
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
|
#17
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
On Jan 20, 9:01*am, (GregS) wrote:
In article , wrote: Ive been having a little bit of trouble lately. The sound wont come out of the receiver to the speakers. I just dont know whats wrong. Thanks... If there is a problem causing the protection relays to disengage, try measuring the votages in fronnt of the relays. It should be very close to zero DC. Two channels ? greg I opened it and there is quite frankly a lot of ****. I have no idea where to start. If someone could tell me where to start. Thats what I need HELP |
#18
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
wrote in message
On Jan 20, 9:01 am, (GregS) wrote: In article , wrote: Ive been having a little bit of trouble lately. The sound wont come out of the receiver to the speakers. I just dont know whats wrong. Thanks... If there is a problem causing the protection relays to disengage, try measuring the votages in fronnt of the relays. It should be very close to zero DC. Two channels ? greg I opened it and there is quite frankly a lot of ****. I have no idea where to start. If someone could tell me where to start. Thats what I need HELP Get a schematic. Learn how it works. |
#19
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
On Jan 20, 5:44*pm, "Arny Krueger" wrote:
wrote in message On Jan 20, 9:01 am, (GregS) wrote: In article , wrote: Ive been having a little bit of trouble lately. The sound wont come out of the receiver to the speakers. I just dont know whats wrong. Thanks... If there is a problem causing the protection relays to disengage, try measuring the votages in fronnt of the relays. It should be very close to zero DC. Two channels ? greg I opened it and there is quite frankly a lot of ****. I have no idea where to start. If someone could tell me where to start. Thats what I need HELP Get a schematic. *Learn how it works. I dont have a schematic first of all. Second if I knew how it worked I wouldnt be asking how to fix it. |
#20
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
On Jan 20, 5:47*pm, wrote:
On Jan 20, 5:44*pm, "Arny Krueger" wrote: wrote in message On Jan 20, 9:01 am, (GregS) wrote: In article , wrote: Ive been having a little bit of trouble lately. The sound wont come out of the receiver to the speakers. I just dont know whats wrong. Thanks... If there is a problem causing the protection relays to disengage, try measuring the votages in fronnt of the relays. It should be very close to zero DC. Two channels ? greg I opened it and there is quite frankly a lot of ****. I have no idea where to start. If someone could tell me where to start. Thats what I need HELP Get a schematic. *Learn how it works. I dont have a schematic first of all. Second if I knew how it worked I wouldnt be asking how to fix it. Look at this http://cgi.ebay.com/ws/eBayISAPI.dll...m=380097152242 I have the same problem. All im asking from you guys is Whats wrong Where in the receiver is it How to fix it. |
#21
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
wrote in message
On Jan 20, 5:44 pm, "Arny Krueger" wrote: wrote in message On Jan 20, 9:01 am, (GregS) wrote: In article , wrote: Ive been having a little bit of trouble lately. The sound wont come out of the receiver to the speakers. I just dont know whats wrong. Thanks... If there is a problem causing the protection relays to disengage, try measuring the votages in fronnt of the relays. It should be very close to zero DC. Two channels ? greg I opened it and there is quite frankly a lot of ****. I have no idea where to start. If someone could tell me where to start. Thats what I need HELP Get a schematic. Learn how it works. I dont have a schematic first of all. That's your fault. Second if I knew how it worked I wouldnt be asking how to fix it. It's very hard to actually fix a broken component over the web. |
#22
Posted to rec.audio.tech
|
|||
|
|||
Tech: Carver Dolby Pro Sound Reciever HR-895
wrote in message ... I opened it and there is quite frankly a lot of ****. I have no idea where to start. If someone could tell me where to start. Thats what I need Start by taking it to someone who knows what they are doing. MrT. |
#23
Posted to rec.audio.tech
|
|||
|
|||
Carver Dolby Pro Sound Reciever HR-895
Jack,
You are unable to describe your problem in the detail necessary to allow anyone to guess at a cause. You need to find someone who likes playing with electroics. There are usually a few of these in any high school. Ask around until you find one or two. Get them to help you. They'll probably want the schematic. If it's not in the owners manual you'll probably need to buy one. Dave M. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
old tech reciever | Tech | |||
How to get DTS or Dolby sound out of my TV ?? | Pro Audio | |||
FA: Carver DPL-20 (DPL20) Dolby Pro-Logic Processor | Marketplace | |||
FA: Carver DPL-20 (DPL20) Dolby Pro-Logic Processor | Marketplace | |||
Reciever (Carver HR-895) intermittantly turning itself off. Can I fix? | Tech |