Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Sony Repair Suggestions
Sony Factory Service refused to repair my 1991 top-of-the-line CDP-X777ES CD
player because they claim they have no parts anymore, this despite the fact that over the phone they had assured me that they did indeed have parts for the CD Player and based on that I had sent it to their San Diego, California, Service Center. The problem is that the CD Player refuses to recognize a few new CDs that are playable on all other CD Players. It plays about 300 other CDs without any problems. Hence I am wondering if anyone might know of a very "reputable" and "reliable" repair service that would be willing to help me? I do not care where it might be within the USA. Thanks in advance for your possible recommendations. |
#2
|
|||
|
|||
Sony Repair Suggestions
For the amount of money it would cost to have the darn thing packed and
shipped from Mail Boxes, Etc., you could buy a new one. randy "Peter" wrote in message nk.net... Sony Factory Service refused to repair my 1991 top-of-the-line CDP-X777ES CD player because they claim they have no parts anymore, this despite the fact that over the phone they had assured me that they did indeed have parts for the CD Player and based on that I had sent it to their San Diego, California, Service Center. The problem is that the CD Player refuses to recognize a few new CDs that are playable on all other CD Players. It plays about 300 other CDs without any problems. Hence I am wondering if anyone might know of a very "reputable" and "reliable" repair service that would be willing to help me? I do not care where it might be within the USA. Thanks in advance for your possible recommendations. |
#3
|
|||
|
|||
Sony Repair Suggestions
"Peter" wrote in message
nk.net... Sony Factory Service refused to repair my 1991 top-of-the-line CDP-X777ES CD player because they claim they have no parts anymore, this despite the fact that over the phone they had assured me that they did indeed have parts for the CD Player and based on that I had sent it to their San Diego, California, Service Center. The problem is that the CD Player refuses to recognize a few new CDs that are playable on all other CD Players. It plays about 300 other CDs without any problems. Hence I am wondering if anyone might know of a very "reputable" and "reliable" repair service that would be willing to help me? I do not care where it might be within the USA. Thanks in advance for your possible recommendations. Did they tell you what part needed to be replaced, that they no longer have? If there diagnosis is correct, then you should try to determine whether you can find the part, either new or from a salvaged player. Keep in mind that if a repair service does not have the part in stock, they order from Sony unless it is generic component. |
#4
|
|||
|
|||
Sony Repair Suggestions
Mark A wrote:
Did they tell you what part needed to be replaced, that they no longer have? If there diagnosis is correct, then you should try to determine whether you can find the part, either new or from a salvaged player. Keep in mind that if a repair service does not have the part in stock, they order from Sony unless it is generic component. Clean the lens, or have the laser replaced. Any competent service person shoulsd be able to do it. You'll need to be able to find the laser part number though. My guess is that you were talking to somebody non-technical, who was put on the spot and decided to take the easy way 'out'. geoff |
#5
|
|||
|
|||
Sony Repair Suggestions
"Geoff Wood" -nospam wrote in message
... Mark A wrote: Did they tell you what part needed to be replaced, that they no longer have? If there diagnosis is correct, then you should try to determine whether you can find the part, either new or from a salvaged player. Keep in mind that if a repair service does not have the part in stock, they order from Sony unless it is generic component. Clean the lens, or have the laser replaced. Any competent service person shoulsd be able to do it. You'll need to be able to find the laser part number though. My guess is that you were talking to somebody non-technical, who was put on the spot and decided to take the easy way 'out'. geoff Keep in mind that most manufacturers like Sony have flat rate pricing for repair of items out of warranty, regardless of what is wrong with it. Sometimes they will you send you a refurbished item in exchange. I believe that he was quoted $216 for the repair. At those prices, they replace parts, and don't just clean them. But for less than $300, one could probably purchase a new one with much better electronics, especially the D/A conversion circuits. Also a new one would play CD-R's, which I doubt the old one does. |
#6
|
|||
|
|||
Sony Repair Suggestions
Geoff Wood -nospam wrote:
My guess is that you were talking to somebody non-technical, who was put on the spot and decided to take the easy way 'out'. Is there someone technical at Sony service? If so, I've never met them. Certainly the guys doing the actual work don't seem to know anything beyond swapping boards until the problem goes away. --scot -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#7
|
|||
|
|||
Sony Repair Suggestions
If you change the machine to play the current discs your 300 old ones will
no longer play. CDS are crap nowadays and are not as thick as they used to be. If you want to play the current cds and are willing to take the chance that it wont play your old cds you can adjust the focus of the laser yourself. Open the machine and follow the ribbon cable from the laser pick up assembly to the PCB where it plugs in. At this location on the PCB you will see one or two small screws which are variable resistors.....turn them until your current discs play But be warned you may now have problems with your older discs! Sony and others will not admit it but thats why they refused to fix it....what you ask is basically very very difficult to do on an older machine Anything older than 12 months these days is "old" "Peter" wrote in message nk.net... Sony Factory Service refused to repair my 1991 top-of-the-line CDP-X777ES CD player because they claim they have no parts anymore, this despite the fact that over the phone they had assured me that they did indeed have parts for the CD Player and based on that I had sent it to their San Diego, California, Service Center. The problem is that the CD Player refuses to recognize a few new CDs that are playable on all other CD Players. It plays about 300 other CDs without any problems. Hence I am wondering if anyone might know of a very "reputable" and "reliable" repair service that would be willing to help me? I do not care where it might be within the USA. Thanks in advance for your possible recommendations. |
#8
|
|||
|
|||
Sony Repair Suggestions
Open the machine and follow the ribbon cable from the laser pick up assembly to the PCB where it plugs in. At this location on the PCB you will see one or two small screws which are variable resistors.....turn them until your current discs play This is _really_ bad advice. The laser pickup can easily be ruined, and it may not even be your problem. Any decent repair shop who is familiar with Sony products ought to be able to fix this. As for replacing it instead, this is a high-end model. No way a cheapie replacement is as good. Mark Z. -- Please reply only to Group. I regret this is necessary. Viruses and spam have rendered my regular e-mail address useless. "Lazarus" wrote in message ... If you change the machine to play the current discs your 300 old ones will no longer play. CDS are crap nowadays and are not as thick as they used to be. If you want to play the current cds and are willing to take the chance that it wont play your old cds you can adjust the focus of the laser yourself. Open the machine and follow the ribbon cable from the laser pick up assembly to the PCB where it plugs in. At this location on the PCB you will see one or two small screws which are variable resistors.....turn them until your current discs play But be warned you may now have problems with your older discs! Sony and others will not admit it but thats why they refused to fix it....what you ask is basically very very difficult to do on an older machine Anything older than 12 months these days is "old" "Peter" wrote in message nk.net... Sony Factory Service refused to repair my 1991 top-of-the-line CDP-X777ES CD player because they claim they have no parts anymore, this despite the fact that over the phone they had assured me that they did indeed have parts for the CD Player and based on that I had sent it to their San Diego, California, Service Center. The problem is that the CD Player refuses to recognize a few new CDs that are playable on all other CD Players. It plays about 300 other CDs without any problems. Hence I am wondering if anyone might know of a very "reputable" and "reliable" repair service that would be willing to help me? I do not care where it might be within the USA. Thanks in advance for your possible recommendations. |
#9
|
|||
|
|||
Sony Repair Suggestions
Lazarus wrote:
If you change the machine to play the current discs your 300 old ones will no longer play. CDS are crap nowadays and are not as thick as they used to be. Thicker CDs are much better. They sound less thin. More depth. geoff |
#10
|
|||
|
|||
Sony Repair Suggestions
Lazarus wrote:
At this location on the PCB you will see one or two small screws which are variable resistors.....turn them until your current discs play But be warned you may now have problems with your older discs! No. This is a very bad idea. There is an actual procedure in the service manual for doing an alignment. It's not all that hard, and all you need is a reference disc and a scope. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#11
|
|||
|
|||
Sony Repair Suggestions
If you change the machine to play the current discs your 300 old ones will
no longer play. CDs are crap nowadays and are not as thick as they used to be. Where did you come up with this garbage? CDs have a standardized thickness. Furthermore, there is a tracking servo that keeps the laser focused, regardless of slight variations in thickness. |
#12
|
|||
|
|||
Sony Repair Suggestions
In article , "Lazarus" wrote:
If you change the machine to play the current discs your 300 old ones will no longer play. What hokey are you smoking? CDS are crap nowadays and are not as thick as they used to be. If you want to play the current cds and are willing to take the chance that it wont play your old cds you can adjust the focus of the laser yourself. Open the machine and follow the ribbon cable from the laser pick up assembly to the PCB where it plugs in. At this location on the PCB you will see one or two small screws which are variable resistors.....turn them until your current discs play But be warned you may now have problems with your older discs! Sony and others will not admit it but thats why they refused to fix it....what you ask is basically very very difficult to do on an older machine Anything older than 12 months these days is "old" "Peter" wrote in message ink.net... Sony Factory Service refused to repair my 1991 top-of-the-line CDP-X777ES CD player because they claim they have no parts anymore, this despite the fact that over the phone they had assured me that they did indeed have parts for the CD Player and based on that I had sent it to their San Diego, California, Service Center. The problem is that the CD Player refuses to recognize a few new CDs that are playable on all other CD Players. It plays about 300 other CDs without any problems. Hence I am wondering if anyone might know of a very "reputable" and "reliable" repair service that would be willing to help me? I do not care where it might be within the USA. Thanks in advance for your possible recommendations. |
#13
|
|||
|
|||
Sony Repair Suggestions
In article et,
Peter wrote: Sony Factory Service refused to repair my 1991 top-of-the-line CDP-X777ES CD player because they claim they have no parts anymore, this despite the fact that over the phone they had assured me that they did indeed have parts for the CD Player and based on that I had sent it to their San Diego, California, Service Center. The problem is that the CD Player refuses to recognize a few new CDs that are playable on all other CD Players. It plays about 300 other CDs without any problems. Sony is that way. Hence I am wondering if anyone might know of a very "reputable" and "reliable" repair service that would be willing to help me? I do not care where it might be within the USA. Take it to your local TV repair shop and ask for a cleaning and lubrication job. If it hasn't been done for a couple of years, you'll find that fixes a lot of your problems. If the problem is actually that it does not play copy-protected CDs, your only recourse is to take them back to the store and demand a refund. Those will not play on a large number of older machines and quite a few newer ones too. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#14
|
|||
|
|||
Sony Repair Suggestions
On Fri, 23 Apr 2004 21:47:47 -0700, Peter wrote
(in message et): Sony Factory Service refused to repair my 1991 top-of-the-line CDP-X777ES CD player because they claim they have no parts anymore... --------------------------------snip---------------------------------- A friend of mine told me this week he heard that Sony is going to let something like a million bucks' worth of parts in their inventory go out of stock, mainly for tax reasons and other related problems. As far as your player goes, it is true that getting anything fixed over 7 years old is a problem -- since legally, the manufacturer only has to carry parts for 7 years after a model has been discontinued. The 777 had a helluva good transport for its time, and the higher-end ES players are built like tanks. I'd hunt around until you can find a good independent service shop who's willing to at least check the laser alignment. It may only need a cleaning, a lube job, and a small bit of alignment to be good as new. --MFW |
#15
|
|||
|
|||
Sony Repair Suggestions
A friend of mine told me this week he heard that Sony is going
to let something like a million bucks' worth of parts in their inventory go out of stock, mainly for tax reasons and other related problems. If so, this is a break with Sony's policy. I had been told by the head of their parts division that they never threw out parts. |
#16
|
|||
|
|||
Sony Repair Suggestions
On Sat, 24 Apr 2004 19:18:39 -0700, William Sommerwerck wrote
(in message ): If so, this is a break with Sony's policy. I had been told by the head of their parts division that they never threw out parts. --------------------------------snip---------------------------------- Oh, I never said they were going to THROW the parts AWAY. Just that they're not going to go out of their way to maintain a large stock of parts anymore. The theory is that they're going to start replacing more boards (if not entire products) rather than do a lot of board-level repair anymore. Again, this is all hearsay, and I haven't gotten confirmation about it. But it's in keeping with Sony closing more and more of their factory-owned service centers. For example, there's no more Sony consumer factory service in LA -- a city of 10 million people. Pretty startling. --MFW |
#17
|
|||
|
|||
Sony Repair Suggestions
"Marc Wielage" wrote in message
... On Sat, 24 Apr 2004 19:18:39 -0700, William Sommerwerck wrote (in message ): If so, this is a break with Sony's policy. I had been told by the head of their parts division that they never threw out parts. --------------------------------snip---------------------------------- Oh, I never said they were going to THROW the parts AWAY. Just that they're not going to go out of their way to maintain a large stock of parts anymore. The theory is that they're going to start replacing more boards (if not entire products) rather than do a lot of board-level repair anymore. Again, this is all hearsay, and I haven't gotten confirmation about it. But it's in keeping with Sony closing more and more of their factory-owned service centers. For example, there's no more Sony consumer factory service in LA -- a city of 10 million people. Pretty startling. --MFW For many years Sony and most other manufacturers have had independent authorized service centers for warranty and non-warranty repairs run by independent electronics service companies. Check your yellow pages for details. In the past, these independent survive companies existed in almost every medium size or larger city, but there is a trend (on the part of consumers) toward not repairing mid-level consumer equipment because of large scale integrated assemblies, the high labor cost involved, the rapid rate of technological obsolescence, and the declining cost of new replacement products. I don't think Sony is any worse than other manufacturers, and in most respects they are better than most. |
#18
|
|||
|
|||
Sony Repair Suggestions
On Mon, 26 Apr 2004 3:21:18 -0700, Mark A wrote
(in message ): For many years Sony and most other manufacturers have had independent authorized service centers for warranty and non-warranty repairs run by independent electronics service companies. --------------------------------snip---------------------------------- The only problem there is, many (but not necessarily most) of them suck. I've dealt with a dozen independent service shops in LA for the better part of 25 years, and have yet to find one that can do a consistently good job. (VTR Service in North Hollywood is good for video gear, but they ain't cheap.) Also, my experience is that the factory-owned service centers generally do a better job the first time, and they also have a much better access to parts. The point of the message was that consumer electronic manufacturers everywhere are cutting way back on service, which is a real shame. They're also making it much harder than ever to get parts, as reflected by David Satz' message about his DAT deck. --MFW |
#19
|
|||
|
|||
Sony Repair Suggestions
Mark A wrote:
For many years Sony and most other manufacturers have had independent authorized service centers for warranty and non-warranty repairs run by independent electronics service companies. Check your yellow pages for details. In the past, these independent survive companies existed in almost every medium size or larger city, but there is a trend (on the part of consumers) toward not repairing mid-level consumer equipment because of large scale integrated assemblies, the high labor cost involved, the rapid rate of technological obsolescence, and the declining cost of new replacement products. And the bad experiences Sony customers have had with authorized service centers. I took a Sony VCR to three different authorized shops when it started creasing tapes after only two years of moderate use. None of these authorized service centers was able to make repairs that stuck for more than a few weeks, even after lengthy stays in the shop -- and I was always the one who had to keep calling to find out when the VCR would be ready. I don't think Sony is any worse than other manufacturers, and in most respects they are better than most. But the reliability of mid-level Sony consumer products has declined more rapidly than other brands in the past ten years, to the point that it is now worse than average. |
#20
|
|||
|
|||
Sony Repair Suggestions
The theory is that they're going to start replacing more boards (if
not entire products) rather than do a lot of board-level repair anymore. Again, this is all hearsay, and I haven't gotten confirmation about it. But it's in keeping with Sony closing more and more of their factory- owned service centers. For example, there's no more Sony consumer factory service in LA -- a city of 10 million people. Pretty startling. I've sent e-mail to a friend at Sony. Hopefully, she'll let us know in a few days. Seattle -- not a small city, either -- lost its Sony factory-service shop about a year ago. Their charges were not especially attractive (whose are?), and in one case I had to lecture the manager about how a dictation machine should be repaired. (It turned out their diagnosis was wrong and mine was right. Oddly, they performed the repair at no charge.) |
#21
|
|||
|
|||
Sony Repair Suggestions
Seven years is not required now, if it ever really was. They are only
required to support the product for the duration of the warranty period, and this can include just replacing the product with a refurb or "equivalent" model. Mark Z. -- Please reply only to Group. I regret this is necessary. Viruses and spam have rendered my regular e-mail address useless. "Marc Wielage" wrote in message ... On Fri, 23 Apr 2004 21:47:47 -0700, Peter wrote (in message et): Sony Factory Service refused to repair my 1991 top-of-the-line CDP-X777ES CD player because they claim they have no parts anymore... --------------------------------snip---------------------------------- A friend of mine told me this week he heard that Sony is going to let something like a million bucks' worth of parts in their inventory go out of stock, mainly for tax reasons and other related problems. As far as your player goes, it is true that getting anything fixed over 7 years old is a problem -- since legally, the manufacturer only has to carry parts for 7 years after a model has been discontinued. The 777 had a helluva good transport for its time, and the higher-end ES players are built like tanks. I'd hunt around until you can find a good independent service shop who's willing to at least check the laser alignment. It may only need a cleaning, a lube job, and a small bit of alignment to be good as new. --MFW |
#22
|
|||
|
|||
Sony Repair Suggestions
Seven years is not required now, if it ever really was.
They are only required to support the product for the duration of the warranty period, and this can include just replacing the product with a refurb or "equivalent" model. NOT SO. A few years back, manufacturers were legally obliged to stock electrical parts for 10 years, mechanical for 7, and cosmetic for 5 (or was it 3). What the law currently is, I don't know. |
#23
|
|||
|
|||
Sony Repair Suggestions
"William Sommerwerck" wrote in message
... Seven years is not required now, if it ever really was. They are only required to support the product for the duration of the warranty period, and this can include just replacing the product with a refurb or "equivalent" model. NOT SO. A few years back, manufacturers were legally obliged to stock electrical parts for 10 years, mechanical for 7, and cosmetic for 5 (or was it 3). What the law currently is, I don't know. What jurisdiction is that? Is that federal, state (which state)? What if a company goes out of business? Do you have a reference? |
#24
|
|||
|
|||
Sony Repair Suggestions
A few years back, manufacturers were legally obliged to stock
electrical parts for 10 years, mechanical for 7, and cosmetic for 5 (or was it 3?). What the law currently is, I don't know. What jurisdiction is that? Is that federal, state (which state)? Federal. What if a company goes out of business? There would be no entity the law could be enforced against. Do you have a reference? No, but the head of Sony parts confirmed this seven or eight years ago. |
#25
|
|||
|
|||
Sony Repair Suggestions
On Sun, 25 Apr 2004 05:49:14 -0700, "William Sommerwerck"
wrote: Seven years is not required now, if it ever really was. They are only required to support the product for the duration of the warranty period, and this can include just replacing the product with a refurb or "equivalent" model. NOT SO. A few years back, manufacturers were legally obliged to stock electrical parts for 10 years, mechanical for 7, and cosmetic for 5 (or was it 3). What the law currently is, I don't know. Where does this law apply? I doubt it's a matter for international law :-) |
#26
|
|||
|
|||
Sony Repair Suggestions
A few years back, manufacturers were legally obliged to
stock electrical parts for 10 years, mechanical for 7, and cosmetic for 5 (or was it 3). What the law currently is, I don't know. Where does this law apply? I doubt it's a matter for international law :-) WITHIN THE UNITED STATES. Where ELSE would I be talking about? Good grief. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sony ES 5-disc changer | General | |||
FA: Sony XR-CA330 & CDX-757MX XPLOD - combo deal - cassette & CD 10 disc player! | General | |||
Sony Wega Audio out volume control issues. | General | |||
What brand of low end receiver to go with (Yamaha, Sony, etc) | General | |||
Sony Preamp Remote Control Not Working | General |