Reply
 
Thread Tools Display Modes
  #1   Report Post  
Comcast Giganews
 
Posts: n/a
Default Accuvolt installation help

Hi


sure- Jacobs tech is closed till 1/5, and i need to get my install done this
week while im off ( i dont begrudge them being off also, but the company I
work for is still open at least).


i need to ask some questions because i hooked up my FR750W, and am getting
no voltage passthrough at the out put terminals when off, and the gren LED
flashed (with still no voltage at the output terminals) when 12v supplied to
the ON screw.

I have about 5 feet of 4g twisetd pos/ned going to the input from the
battery.. i am powering a mac 420 (50*4), and one 200w sub amp for now.

also, to the left on the labelled input screws- there are a second set of
screws that the instruction dont show. i found out that these are POWERED.
also, the instruction show the word FUSE beside each input screw- there are
no fuses there.

i do no have the remote sense hookup in use- but- do you just leave those 2
screws unconnected to anything? each other? or, is it NOT optional, and they
have to be hooked to the output voltage?

help! this is the last step before sliding the headunit in and powring up
the system!

thanks




Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Installation kit Mr. Smith Car Audio 1 December 29th 03 09:31 PM
Is old fashion custom installation dead? (from Toronto) Ben Car Audio 12 October 18th 03 03:50 PM
2002/2003 Civic Si CD unit Installation C.Clark Car Audio 2 October 7th 03 10:24 PM
Installation Problem Onyi C. Ejiasa Car Audio 2 July 20th 03 06:25 AM
346is manual need / installation help Pat M Car Audio 1 July 3rd 03 07:12 AM


All times are GMT +1. The time now is 07:19 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"