Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Posted to rec.audio.tubes
[email protected] vwmicrobus@gmail.com is offline
external usenet poster
 
Posts: 5
Default Restoring a Sherwood S-5000

OK, here are the stats. The main filter cap has been replaced with another can. Others have been replaced underneath.
Link to pics: https://www.dropbox.com/sh/zoqcrtzbmn1saha/JxXYbkaIIc

C1/a 472VDC
C1/b 470VDC
C1/c 388VDC
C2/a 301VDC
C2/b 217VDC
A lot higher than what you had, and what specs show! No wonder the 6BQ5's I originally tried for power amps were arcing.

There is an additional cap (see it in the C1 photo, to the right of the can) that has 46VDC on it.

Bias caps; These have been replaced, so my measurements are left to right as viewed in the pic:
-26.6vdc, -34.5vdc, -26.1vdc

As for the DC filiment voltages, the only one I found was 13.3VDC on the first two 12AX7's where is the 24V supposed to be?

Selineium rectumfryers have been replaced with diodes, see pic.

Tubes are as follows from the top, Left to right nearest the front: three Telefunken 12ax7, two Tesla ecc803s. Adjacent the filter cap are two RCA 7199.

I will note that the phono hum seemed to be less on my workbench than in the workshop that I am using the amp, not sure if that is because of smaller speakers, or lack of 8-ft flourescent lights above, or just power situations. But, it is still there. The amp is quite silent on FM input (used for my iPod)

--JRC


 
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Loud buzz on Sherwood S 5000 Ray Smith Tech 1 March 10th 13 11:21 PM
Sherwood S-5000 II Integrated Amplifier Jon Yaeger Vacuum Tubes 1 March 28th 05 06:20 AM
WTB: Sherwood 5000 parts Jon Yaeger Marketplace 1 February 15th 05 04:10 PM
WTB: Sherwood 5000 parts Jon Yaeger Vacuum Tubes 1 February 15th 05 04:10 PM
Sherwood S-5000 II Question [email protected] Vacuum Tubes 0 July 11th 04 09:17 PM


All times are GMT +1. The time now is 01:45 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"