Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Heathkit Turner Amplifier
I am sorting and clearing lots of stuff. Dug out my old Heathkit
AR-15 Turner Amplifier. Seems to work well, but some of the backlights for the front panel are burned out. Is it worth the effort on this thing to try and get the bulbs and replace them? It was pretty much state of the art in the late 60s early 70s when it came out. How much has it been left behind by new developments? |
#2
|
|||
|
|||
"Bill" wrote in message
... I am sorting and clearing lots of stuff. Dug out my old Heathkit AR-15 Turner Amplifier. Seems to work well, but some of the backlights for the front panel are burned out. Is it worth the effort on this thing to try and get the bulbs and replace them? It was pretty much state of the art in the late 60s early 70s when it came out. How much has it been left behind by new developments? Probably best place to get advice on this is on the Vintage Forum at www.audioasylum.com. Large group of vintage equipment buffs there who know their stuff for the most part. They'll not only tell you whether or not it's worth it (probably is) but probably also what bulbs it takes and where to get them. |
#3
|
|||
|
|||
Bill wrote:
I am sorting and clearing lots of stuff. Dug out my old Heathkit AR-15 Turner Amplifier. Seems to work well, but some of the backlights for the front panel are burned out. Is it worth the effort on this thing to try and get the bulbs and replace them? It was pretty much state of the art in the late 60s early 70s when it came out. How much has it been left behind by new developments? It was decent in its day; not a McIntosh or Marantz, but a cut above the early solid state stuff from Pioneer, Kenwood, Sansui and the like. I always thought its tuner was what stood out, in comparison with its kit-built competition, the Dynaco PAT/ST-120 and FM-3 (the FM-5 didn't come out til a couple of years later, and when it did, it was much better in RF performance than the FM-3). What tended to fail in the Heathkit AR-15 was the numerous coupling and bypass capacitors, which were are labeled "NASHVILLE" or "TENNESSEE." Bad ones would tend to go open-circuit early in life, causing a dead channel. The main filter capacitor would sometimes fail, too, causing a raw hum in the speakers. After about ten years, though, I didn't see any more of either problem. Maybe only the bad capacitors failed early, and if a particular unit got through the first ten years, that meant it didn't have any bad capacitors in it. I can't remember what lamps it used, though Heath almost never used anything that wasn't a readily available part. As for changing them...if you put that AR-15 together from a kit, you can surely change the lamps! -GP |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
rec.audio.car FAQ (Part 2/5) | Car Audio | |||
Audio amplifier design trivial? | Audio Opinions |