I haven't used this mic in awhile and i went to record a solo nylon
string gutiar track tonight and the mic wasn't working. Last time I
used it it performed correctly. I checked my cable and preamp and both
were fine. Running the c3000b into a mackie onyx board. The problem
is that mic has no gain. I had to turn the preamp trim up almost all
the way to get any signal and then of course there's noise all over the
place. Has this happened to anyone here before? What do you suppose
is theproblem and what's the best way to handle it? I've never really
liked the mic, but it's always been a usable mic- I guess if it's kaput
i'll replace it with something better. Anyway, any opinions/ideas?

Nate