Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Maggies - 4 or 8 ohms with sub amp in between?
AMC-3030 integrated tube amp. Runs 4 or 8 ohms. Using an NHT SA-1 sub
amp in between. (Sub amp runs speaker level signals and crosses to Maggies at 120hz). I know the Maggies want 4 ohm and the tube amp can do it. However the NHT sub amp is in the middle. I assume it wants 8 ohms(?). I also assume it uses a passive xformer inside to couple the signal in the amp for the sub and cross over the Maggie signal. I say it must be a xformer because the Maggies work with the sub amp off - the signal passes right through. So which tap do I use on my AMC? |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
wiring options for 2 subs (2 omhs vs 4 ohms) | Car Audio | |||
Wiring Speakers...4/8 ohms?? | Audio Opinions | |||
Weird speaker cabling question | Pro Audio | |||
rec.audio.car FAQ (Part 2/5) | Car Audio | |||
Xfr testing | Vacuum Tubes |