Home |
Search |
Today's Posts |
#1
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote ...
i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? |
#2
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote ...
i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? |
#3
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote ...
i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? |
#4
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote ...
i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? |
#5
|
|||
|
|||
unbalance to balance conection
Hi..
i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) thanx in advance emil |
#6
|
|||
|
|||
unbalance to balance conection
"Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help emil |
#7
|
|||
|
|||
unbalance to balance conection
"Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help emil |
#8
|
|||
|
|||
unbalance to balance conection
"Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help emil |
#9
|
|||
|
|||
unbalance to balance conection
"Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help emil |
#10
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help emil Rotel is RCD 945AX Monitors Merdian M20 e |
#11
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help emil Rotel is RCD 945AX Monitors Merdian M20 e |
#12
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help emil Rotel is RCD 945AX Monitors Merdian M20 e |
#13
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help emil Rotel is RCD 945AX Monitors Merdian M20 e |
#14
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks I would first try connecting the outside (ground/shield) of each RCA jack to the "-" sides (L-, R-) and the center (pin) to the "+" pins. That would theoretically give most protection against ground loops. But connecting the "-" sides to the ground pin might be necessary (experiment). |
#15
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks I would first try connecting the outside (ground/shield) of each RCA jack to the "-" sides (L-, R-) and the center (pin) to the "+" pins. That would theoretically give most protection against ground loops. But connecting the "-" sides to the ground pin might be necessary (experiment). |
#16
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks I would first try connecting the outside (ground/shield) of each RCA jack to the "-" sides (L-, R-) and the center (pin) to the "+" pins. That would theoretically give most protection against ground loops. But connecting the "-" sides to the ground pin might be necessary (experiment). |
#17
|
|||
|
|||
unbalance to balance conection
"emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks I would first try connecting the outside (ground/shield) of each RCA jack to the "-" sides (L-, R-) and the center (pin) to the "+" pins. That would theoretically give most protection against ground loops. But connecting the "-" sides to the ground pin might be necessary (experiment). |
#18
|
|||
|
|||
unbalance to balance conection
thanx Richard i will tray to do it today will tell You result emil "Richard Crowley" wrote in message ... "emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks I would first try connecting the outside (ground/shield) of each RCA jack to the "-" sides (L-, R-) and the center (pin) to the "+" pins. That would theoretically give most protection against ground loops. But connecting the "-" sides to the ground pin might be necessary (experiment). |
#19
|
|||
|
|||
unbalance to balance conection
thanx Richard i will tray to do it today will tell You result emil "Richard Crowley" wrote in message ... "emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks I would first try connecting the outside (ground/shield) of each RCA jack to the "-" sides (L-, R-) and the center (pin) to the "+" pins. That would theoretically give most protection against ground loops. But connecting the "-" sides to the ground pin might be necessary (experiment). |
#20
|
|||
|
|||
unbalance to balance conection
thanx Richard i will tray to do it today will tell You result emil "Richard Crowley" wrote in message ... "emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks I would first try connecting the outside (ground/shield) of each RCA jack to the "-" sides (L-, R-) and the center (pin) to the "+" pins. That would theoretically give most protection against ground loops. But connecting the "-" sides to the ground pin might be necessary (experiment). |
#21
|
|||
|
|||
unbalance to balance conection
thanx Richard i will tray to do it today will tell You result emil "Richard Crowley" wrote in message ... "emil SonarScope" wrote in message ... "Richard Crowley" wrote in message ... "emil SonarScope" wrote ... i need to conect cd player ( line out unbalance)) to studio monitors with balance input how i can do it? if enybody now for inexpencive solution ;-) Do you have access to someone who can solder the connectors (to make your own)? Or are you looking to buy the cables (or adapters)? What kind of connectors do the inputs use? 1/4inch phone? XLR? something else? What equipment (brand/model) are the CD player and the studio monitors? hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks I would first try connecting the outside (ground/shield) of each RCA jack to the "-" sides (L-, R-) and the center (pin) to the "+" pins. That would theoretically give most protection against ground loops. But connecting the "-" sides to the ground pin might be necessary (experiment). |
#22
|
|||
|
|||
unbalance to balance conection
On Sun, 11 Apr 2004 19:24:31 +0100, "emil SonarScope"
wrote: hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help Tie input - to ground. RCA - to this, pin to + |
#23
|
|||
|
|||
unbalance to balance conection
On Sun, 11 Apr 2004 19:24:31 +0100, "emil SonarScope"
wrote: hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help Tie input - to ground. RCA - to this, pin to + |
#24
|
|||
|
|||
unbalance to balance conection
On Sun, 11 Apr 2004 19:24:31 +0100, "emil SonarScope"
wrote: hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help Tie input - to ground. RCA - to this, pin to + |
#25
|
|||
|
|||
unbalance to balance conection
On Sun, 11 Apr 2004 19:24:31 +0100, "emil SonarScope"
wrote: hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help Tie input - to ground. RCA - to this, pin to + |
#26
|
|||
|
|||
unbalance to balance conection
"Laurence Payne" wrote in message ... On Sun, 11 Apr 2004 19:24:31 +0100, "emil SonarScope" wrote: hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help Tie input - to ground. RCA - to this, pin to + I did it is working but - hi frequency are missing maybe problem with impedance ? e |
#27
|
|||
|
|||
unbalance to balance conection
"Laurence Payne" wrote in message ... On Sun, 11 Apr 2004 19:24:31 +0100, "emil SonarScope" wrote: hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help Tie input - to ground. RCA - to this, pin to + I did it is working but - hi frequency are missing maybe problem with impedance ? e |
#28
|
|||
|
|||
unbalance to balance conection
"Laurence Payne" wrote in message ... On Sun, 11 Apr 2004 19:24:31 +0100, "emil SonarScope" wrote: hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help Tie input - to ground. RCA - to this, pin to + I did it is working but - hi frequency are missing maybe problem with impedance ? e |
#29
|
|||
|
|||
unbalance to balance conection
"Laurence Payne" wrote in message ... On Sun, 11 Apr 2004 19:24:31 +0100, "emil SonarScope" wrote: hi, i am quit good in soldering and i will be happy to get my solder system on the table studio monitors are Meridian - don't now the model something old and have 5 pin connector but i now the pin order GROUND L+ L - / R+ R- cd player is hi fi unit Rotel 965 something old - RCA jacks thanx for traying to help Tie input - to ground. RCA - to this, pin to + I did it is working but - hi frequency are missing maybe problem with impedance ? e |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
GFP-750 Preamp Volume and Balance Controls | High End Audio | |||
balance problems with a Technics 676 cassette deck | Tech | |||
Sound, Music, Balance | High End Audio | |||
Where are those Wascally Weapons of Mass Destwuction??? | Audio Opinions |