I have a heathkit AA-32 that I am recapping and I discovered that one one of
the capacitirs was only connected on one side, The cap in question is a .1 Cap
connected to pin3 on tube V4 6GW8. I need to know what pin the other end goes
to. I do not have a schematic and I would appreciate someone with one to help
me out.
Thanks in Advance,
Mario

In article ,
(RADIO TUBE) wrote:

I have a heathkit AA-32 that I am recapping and I discovered that one one of
the capacitirs was only connected on one side, The cap in question is a .1 Cap
connected to pin3 on tube V4 6GW8. I need to know what pin the other end goes
to. I do not have a schematic and I would appreciate someone with one to help
me out.
Thanks in Advance,
Mario



I don't know the AA-32, but my guess would be that the other end of the
0.1 uF capacitor should connect to pin 7 of the 6GW8.


Regards,

John Byrns


Surf my web pages at, http://users.rcn.com/jbyrns/

[Paul Reitzel]

Originally Posted by RADIO TUBE

I have a heathkit AA-32 that I am recapping and I discovered that one one of
the capacitirs was only connected on one side, The cap in question is a .1 Cap
connected to pin3 on tube V4 6GW8. I need to know what pin the other end goes
to. I do not have a schematic and I would appreciate someone with one to help
me out.
Thanks in Advance,
Mario

I have a schematic for the AA-32. It's not very clear, but is readable. I can email it to you if you like.
Cheers, Paul

[John L Stewart]

Originally Posted by RADIO TUBE

I have a heathkit AA-32 that I am recapping and I discovered that one one of
the capacitirs was only connected on one side, The cap in question is a .1 Cap
connected to pin3 on tube V4 6GW8. I need to know what pin the other end goes
to. I do not have a schematic and I would appreciate someone with one to help
me out.
Thanks in Advance,
Mario

Pin 3 of the 6GW8 is the screen connexion to the pentode. The 0.1 microfarad cap opposite end can be connected to either the ground rail (zero volts, some call B- in error) or the cathode of the pentode. Where depends on the negative feedback connexion. But will work OK either way.

Cheers, John