Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tubes
|
|||
|
|||
marshall el34 100/100
I use a marshall jcm 800 and a jcm 900 both through 1960 a cabs. on
stage ive used power attenuators and they just degrade the sound. Is it possible to run both amps each on a different channel through the marshall el34 100/100.will this degrade the tone or make it better? or is that just insane |
#2
Posted to rec.audio.tubes
|
|||
|
|||
marshall el34 100/100
chillewille wrote: I use a marshall jcm 800 and a jcm 900 both through 1960 a cabs. on stage ive used power attenuators and they just degrade the sound. Is it possible to run both amps each on a different channel through the marshall el34 100/100.will this degrade the tone or make it better? or is that just insane It sounds likely to me that the tone you like is cause by speaker breakup as much as the amplifier. The only way to achieve that is to drive them hard ( ie. loud ). I assume your idea is to avoid defeaning yourself in order to get the sound you want. You could perhaps try smaller speakers or of course a simulator may do better than that. Graham |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
marshall avt150h+avt412 vs jcm800+1960 | Pro Audio | |||
EL34 tube problem on HICKOK 539B tube tester!! | Vacuum Tubes | |||
4 NOS NIB Mullard EL34 xf2 - worth 365$ ? | Vacuum Tubes | |||
FA: 6CA7 EL34 Flat Top, Metal Base, CBS, NOS Very Rare | Vacuum Tubes | |||
The EL34 is Gods Own Tube | Vacuum Tubes |